Engineering Technician V

Job Description

Job Description

Description:

Company Overview:

Magee Technologies (MTech) is a premier provider of comprehensive aerostructure solutions and complex systems integrations for defense and commercial customers. We are more than a service provider, we are a dedicated partner working side-by-side with our clients to solve their most unique challenges with optimal, tailored engineering. By integrating our specialized expertise in structural design, complex airworthiness, and rapid prototyping with a customer-centric approach, MTech serves as a "one-stop" solution from initial concept through production and flight. This deep commitment to partnership, backed by an AS9100-certified quality system, ensures that every technical hurdle is met with a high-performance solution specifically calibrated to achieve our clients' mission-critical goals. 

This position is covered by the McNamara-O’Hara Service Contract Act (SCA) and is subject to the applicable U.S. Department of Labor (DOL) wage determination. Compensation, fringe benefits, and applicable paid leave will be provided in accordance with the SCA wage determination incorporated into the governing federal contract. The minimum hourly wage and health & welfare fringe benefit rate are set by the DOL and may be adjusted in accordance with contract modifications or updated wage determinations.

*This is an on-site position and candidates MUST be willing to relocate or able to reliably commute to work daily.  

**Candidates MUST BE eligible for a US Security Clearance.  Non-US Citizens are ineligible for US Security Clearances.

MTech Offers: 

· Flexible work schedule

· Paid Time Off including Holidays, Sick, Vacation, Military Pay, Bereavement, and Jury Duty

· Immediate 401 (k) eligibility

· Full Healthcare Eligibility including Medical, Dental, and Vision plus H&W

· Flexible Spending Account and Dependent Care Flexible Spending Account

· Health Savings Account

· Employee Referral Bonus

· Company Provided Short- and Long-Term Disability insurance

· Company Provided Life Insurance

· Critical Illness, Accident and Voluntary Life Insurance Eligibility

· Fantastic company culture and atmosphere

Impact Summary:

The Engineering Technician V will serve as a technical expert, providing critical support to the design, development, substantiation, and documentation of complex aircraft modifications and prototype systems for military and civilian aircraft. The Engineering Technician V will execute critical engineering projects with a high level of autonomy and expertise, ensuring technical excellence in design and implementation. The role requires advanced problem-solving skills and the ability to adapt designs to meet unique specifications and challenging performance criteria. Successful candidates will significantly contribute to the development and improvement of engineering solutions that meet both current and future needs.

Responsibilities:

• Plan and execute non-routine, complex technical assignments covering a complete project of limited scope or a defined portion of a larger aircraft modification effort; select and adapt layouts, techniques, and design approaches within established engineering guidance.
• Develop and revise 3D models and detailed 2D aircraft installation, bracket, adapter, structural attachment, cable support, access panel, and assembly drawings, including specifications, parts lists, material callouts, and clear notes and references.
• Apply applicable ASME Y14.x standards and GD&T to drawing development and review; establish functional datum schemes and appropriate position, profile, flatness, perpendicularity, and runout controls.
• Maintain consistency between 3D models, 2D drawings, and model-based dimensions and annotations; incorporate engineering redlines and preserve accurate revision history.
• Interpret wiring diagrams and harness schematics and create 2D wire routing and cable installation drawings that identify clip and strap locations, spacing, penetrations, grommets, strain relief, and separation from adjacent aircraft systems.
• Research and integrate aircraft technical data from approved naval aviation and platform repositories and original equipment manufacturer documentation to establish design baselines and support modification decisions.
• Manage CAD and document artifacts in the designated product lifecycle management (PLM) system, including searches, check-out/check-in, revisions, baselines, lifecycle status, and engineering change documentation.
• Prepare geometry, fastener patterns, and design details for engineering review and structural substantiation, accounting for load paths, shear, tension, bearing, edge distance, pitch, and gage.
• Coordinate with engineers, structural analysts, manufacturing personnel, quality inspectors, and installation artisans to resolve discrepancies, support fit and clearance verification, and incorporate installation feedback into controlled design updates.
• Plan or assist with equipment tests and installation evaluations; identify test requirements and procedures, analyze technical data and results, and document findings and recommended modifications.
• Review and integrate the technical work of others, mentor junior technicians in drawing and GD&T practices, and..

Competencies:

• Technical judgment : Translates general engineering concepts and incomplete task definitions into practical, releasable technical solutions and identifies issues requiring engineering direction.
• Drawing precision: Applies drafting standards and GD&T with attention to functional fit, manufacturing capability, inspection feasibility, and aircraft installation constraints.
• Digital design integration: Maintains alignment among models, drawings, routing documentation, and supporting technical data.
• Configuration discipline: Maintains traceable revisions, controlled baselines, complete records, and auditable engineering documentation.
• Problem solving and coordination: Resolves technical discrepancies through analysis and effective communication across engineering, manufacturing, quality, and installation teams.
• Independent execution and mentorship: Organizes competing assignments, delivers technically complete work, and provides clear guidance and constructive peer feedback 

  Qualifications:

•   High school diploma or equivalent and a minimum of nine years of experience performing the Engineering Technician V functions described above required.
• Required : Aircraft modification experience involving mission systems, sensors, or prototype equipment and the design or documentation of structural attachments, brackets, cable supports, or access panels; Department of Defense experience preferred.
• Required : Thorough working knowledge of applicable ASME Y14.x standards, including Y14.5, Y14.100, and Y14.24, and fluent GD&T application, including functional datum selection and drawing review.
• Required : Proficiency in PTC Creo, SolidWorks, or CATIA part modeling, assembly, and drawing modules; ability to independently produce releasable installation and component drawings and maintain model-to-drawing consistency.
• Required : Ability to read wiring diagrams and harness schematics and create detailed 2D cable installation drawings; awareness of 3D routing concepts and aircraft clearance, separation, and maintainability constraints.
• Required : Proficiency in PTC Windchill or ENOVIA for CAD and document control, lifecycle workflows, and baselines; prior exposure to DoD technical data repositories such as AVPLM, IETMS, or platform-specific systems.
• Required : Working knowledge of structural load paths and fastener considerations; demonstrated ability to execute complex assignments independently, maintain government configuration records, and mentor junior technicians.
• Required : U.S. citizenship and eligibility to obtain and maintain a Secret security clearance; at least an interim Secret clearance is required before starting work.
• Desired : Hands-on 3D cabling or harness design in Creo or equivalent tools; advanced assembly and sheet metal modeling; electromechanical integration experience with rack and equipment mounting, connector bulkhead panels, and cable support hardware.
• Desired : Familiarity with MIL/NAS/MS hardware specifications and platform-specific or NAVAIR practices; experience coordinating GD&T with quality inspectors, improving drawing standards, conducting peer reviews, and supporting on-aircraft measurements, fit checks, and installation trials in hangar or depot environments 

Travel: 

· Travel may be required up to 5% of the time.

General:

This list of responsibilities is not exhaustive and the employee may be required to perform duties outside of this as operationally required. 

Salary Information: 

The estimated salary range for this position will be $43.61 - $62.50 per hour based on the successful candidates experience, qualifications, and skill set. 

EEO Statement:

MTech is an equal opportunity employer and does not discriminate employees and applicants on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status or any other characteristic protected by law with regard to any employment practices provided the individual is qualified, with or without reasonable accommodations, to perform the essential functions of the job. We celebrate diversity and are committed to creating an inclusive environment for all employees.