Product Compliance and Test Engineer
Full-time
Fortive
Description
Responsibilities:
- Review and evaluate new product designs support engineering changes to existing designs and evaluate legacy equipment against constantly evolving standards.
- Determine functional environmental and/or compliance test requirements and applicability of tests equipment and facilities. Build and complete test plans and document results in compliance with ISO 17025.
- Evaluate progress of tests for validity of test conditions means of measurement and performance of components or equipment in relation to specifications or requirements of harmonized standards. Familiarity with IEC 61010 (safety) and IEC 61326 (EMC) standards.
- Review and document test results; take corrective action as needed. Analyze component failures; recommend alternate components or design changes.
- Author and defend test reports submitted international certification bodies such as CSA and ETL.
- Specify select and/or design laboratory test equipment vital to complete equipment assessment; assist in preparation of documents to enable fabrication of new test equipment; write operating/verification procedures for new laboratory equipment and build preventative maintenance procedures and schedules. Create laboratory work instruction for use by others.
- (optional) Support for Ex Quality Management system requirements of equipment intended for use in explosive atmospheres including factory work instruction review production audits ECO review against certification documents component incoming inspection guides etc. Experience with IEC 80079-34 IEC 60079-0 11 for intrinsically safe designs a plus.
- (optional) opportunity for software development towards hardware interface control data collection and reporting to assist in laboratory testing needs. Experience with LabView a plus.
- Normal office and laboratory environments. Extra hours may be required for meeting commitments but should be considered atypical. Opportunity to work from home 2 days per week depending on laboratory workload requirements. Travel less than 5%. Potential international travel to standards meetings.
Qualifications:
- Bachelors degree in Electrical Engineering or higher recommended. Other engineering/physical science degrees may be acceptable with suitable laboratory or other relevant electrical/electronics experience per below.
- Minimum 7 years of experience in product safety or EMC evaluation electronics design or relevant laboratory work towards product compliance safety evaluation. Experience with third party certification house such as UL CSA TUV Intertek etc a plus.
- Solid understanding of basic physics and physical concepts a necessity including ac/dc voltage electrical current resistance inductance capacitance power energy force acceleration temperature pressure heat transfer etc. Working knowledge of high frequency RF a plus.
- Strong background using a wide variety of test equipment including multimeters calibrators oscilloscopes signal generators power supplies spectrum analyzers current clamps and thermometers with an understanding of their capabilities and limitations. Able to select the proper equipment for each task/measurement with limited assistance.
- Comfortable with work around high voltage high temperature high pressure flammable materials and other potentially hazardous test environments where appropriate safety precautions must be rigorously followed.
- Comfortable analyzing schematics and wiring diagrams to understand basic concepts of circuit function potential sources of failure and components and subsystems relied upon for protection against hazards.
- Basic understanding of metrology and how to interpret laboratory equipment specifications and suitability for measurement needs.
- Basic electronics skills including opamp diode transistor circuit analysis power transformers and switching power supplies.
- Comfortable with understanding interpreting and applying generalized test procedures and standards to wide variety of specific product applications.
- Strong background in MS Office and other software tools including Teams Word Excel Outlook PowerPoint Access SharePoint Miro etc.) experience in formatting and document manipulation a must. Document automation template creation VBA and macro writing experience a benefit.
- Strong language and communication skills including technical writing user documentation review and editing along with clear and concise communication through email MS Teams phone conversations and instant messaging.
- Should be able to disassemble and reassemble sophisticated test and measurement and laboratory equipment without instructions or damaging the equipment to facilitate design review prep for laboratory testing and failure analysis.
- Comfortable training other associates on use of laboratory equipment. See one do one teach one mentality.
Required Experience:
IC
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Product Compliance and Test Engineer in Everett, MA vacancy
$95k - $245k
...defense and space exploration to biomedical engineering, lives often depend on the solutions... ..., visit .Job Description Summary:The Production Test Engineering & Execution Group at... ...or training. Union ranges will be in compliance with the collective bargaining agreement...SuggestedFull timeLocal area$45 - $57 per hour
...Job Description Job Description Title : EMC Compliance Test Engineer Location: Wilmington, MA – 100% Onsite Duration: 4+ Month Contract... ...Perform hands-on EMC/EMI compliance testing on electronic products and systems. Execute testing in accordance with...SuggestedContract work$132k - $175k
...THE JOB We are seeking a Manufacturing Test Engineer to join Anduril, working in a cutting-edge... ...we continue drive scalability into our production operations.WHAT YOU’LL DO Build a broad... .... Use of this provider helps to ensure compliance with applicable laws and protect...SuggestedFull timeWork experience placementImmediate startFlexible hours$90 - $105 per hour
...help our customers solve complex systems engineering and integration challenges. CSG is... ...Development Program (CLDP) Integrated Systems Test & Validation/ SE&I Engineer (MTS Casual... ...particularly focusing on operations-related products. The successful candidate will be...SuggestedHourly payPart timeCasual workWork at officeImmediate startRemote workRelocation packageFlexible hours- ...on LinkedIn and X.About the RoleAs a Product Quality Engineer, you will support product quality and... ...documentation.Support quality management systems, compliance requirements, and continuous... ..., product engineering, manufacturing, test engineering, or related technical areas...SuggestedPermanent employmentWork experience placementInternshipWork at officeShift work
$104.8k - $167.6k
...results.Teradyne is a global test and automation specialist helping... ...develop and deliver products quickly, efficiently, and cost... ...Join a collaborative, global engineering team bringing innovative products... ...compliantly. Teradyne seeks a Product Compliance Engineer in North Reading, MA...WorldwideFlexible hours- ...Job Description Job Description Job Description: The Product Design Quality Engineer is responsible for supporting quality throughout the product development lifecycle by ensuring compliance with regulatory requirements, quality standards, and design control processes...
- ...comes next, followed by the Dill Autonomy Engine: generalized autonomy that will... ...We’re looking for a Junior Manufacturing Test Engineer to join our Manufacturing Test Engineering... ..., and functional validation Load production software and customer-specific configurations...
- ...integrated circuit (PIC) platform, bringing high-performance modulators and related devices from lab to product. We’re looking for a Photonics Fabrication and Test Engineer who can turn device concepts into repeatable, high-yield fabrication flows and continuously...Flexible hours
- ...Description: The Quality Engineering and Validation Consultant is... ...application of quality assurance and compliance. This position coordinates... ...and commercial Drug Product manufacture. This position reports... ....) Support EM and Routine testing of facilities and utilities...Work experience placementMonday to Friday
- ...Job Description Quality Engineer Location: Woburn, MA (On-... ...Engineer who not only ensures compliance and reliability today, but also... ...into our next generation of products and processes. This is a unique... ...(RCA), FMEA, and reliability testing for lighting assemblies and...Immediate start
$157.08k - $227.46k
...billion in FY25, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at and on LinkedIn and X.Principal Test Engineer - Product DevelopmentThe INS ATE Development Sustaining team located in Wilmington, MA is currently seeking an experienced Test...Permanent employmentFull timeWork at officeLocal areaDay shift$92k - $140k
...bring their ideas to life, from cutting-edge products to life-saving medical devices. Our 3D... ....We’re a team of hands-on builders, engineers, and innovators reinventing how the world... ...come build it with us.As a Manufacturing Test Engineer, you’ll lead the design and development...Contract workWork at officeWorldwideFlexible hours- ...through our rigorous approach, field tested processes, and elite expertise... ...Summary: As the Senior Quality, Compliance, and Regulatory Engineer at CAI, you will serve as both a strategic... ...client relationships for a portfolio of products and being responsible for close...Local areaWorldwide
- ...over sponsorship of an employment visa at this time. Compliance & Reporting Engineer Mark43's mission is to empower communities and their... ...Partnered with Customer Success, Solutions Engineering, Product, and Engineering teams to understand customer reporting needs...Remote workWork visaShift work
$130k
job summary: Seeking a Product Compliance Engineer for a high growth capital equipment development and manufacturing company in the Reading, MA... ..., and ongoing post-market compliance for complex automated test systems. Success in this position requires a strong working...Permanent employmentTemporary workWork experience placement$89.82 - $90.9 per hour
...Job Title: Manufacturing Test Engineer Job Description The Experienced Manufacturing Test Engineer will develop and manage the manufacturing test strategy for complex electromechanical products. This role encompasses moving these products from prototype and new...Contract workTemporary work- ...United States. We’re a team of researchers, engineers, technicians, operators, and sellers who... ...Intelligence is seeking a manufacturing test engineer to design, build and own the... .... Our next-generation robot moves into production in early 2027 and ramps to 18 robots a day...Full timeContract workShift work
$110k - $160k
...Job Description Job Description Test Engineer - Prove Out Reactors and Process Systems for Next-Generation Defense Manufacturing... ...You will plan and run testing from the bench through pilot and production scale, instrument the setups, analyze the results, and feed what...$62.5k - $156k
...space exploration to biomedical engineering, lives often depend on the... ...Summary:System Integration and Test (I&T) Engineer 1 serve as the... ...for technologies and product lines developed using Draper'... ...training. Union ranges will be in compliance with the collective bargaining...Full timeLocal area- ...area. Visit TextronSystems.com & Lycoming.com to read more about who we are and the products we make! About This Role: We are seeking a motivated engineer with a Mechanical or Test Engineering background to support strategic weapon system development for our Advanced...WorldwideFlexible hours
- ...Description Job Description: Responsible for ensuring product quality, regulatory compliance, and process adherence in manufacturing environments... ...DHF, DMR, and DHR. Collaborate with manufacturing, engineering, and supplier teams to resolve quality issues....
- ...We're looking for a hands-on Principal Reliability & System Test Engineer to join our growing team and build the test capabilities necessary... .... You'll partner closely with Hardware, Robot Software, AI, Product, Design, and Manufacturing & Operations, with support from external...Remote jobFull timeWork at officeWorldwide3 days per week
$90k - $130k
...’re ALTEN Technology USA, an engineering company helping clients bring... ...we deliver across the entire product development cycle, from consulting... ...inspired to grow. As a Test Engineer you will be... ...TestRail, or similar Ensure compliance with quality, safety, and reliability...For contractors$56 - $91 per hour
...Description Job Title: Senior EMC/EMI Compliance Engineer Location: North Reading, MA... ...principles during the design phase to ensure products meet regulatory and industry standards... ...1/EN55011, FCC, and IEC 61000-4-x. Testing and Validation: Develop EMC design requirements...Hourly payPermanent employmentContract work- ...Automated Test Engineer Anywhere Type: Contract Category: Quality Assurance (QA) Industry: Technology Workplace Type: Remote Standard Hours... ...TypeScript. The engineer will triage CI failures, distinguish product defects from test or infrastructure issues, and improve test...Hourly payContract workRemote work
$129k - $171k
...embedded within a high-tempo, multi-disciplinary engineering team. You will support end-to-end environmental and reliability test campaigns—including Design Verification... ...early proof-of-concept through to full-rate production. What You’ll Do Function as a member of an interdisciplinary...Full timeWork experience placementLocal area- ...Overview The Validation Engineer III will serve as a key member of the validation team... ...and maintained in a validated state in compliance with applicable regulatory requirements... ...travel may be needed to support project timelines or production schedules #J-18808-Ljbffr...For contractorsWork at office
$82.3k - $220k
...space exploration to biomedical engineering, lives often depend on the... .... As a Senior Electronics Test Engineer you will be responsible... ...scaling test efficiency for production. You will need to think... ...training. Union ranges will be in compliance with the collective...Full timeLocal area$40 - $44 per hour
...Job Description Job Description Primary Skills: GMP Compliance (advanced), Test Method Development (intermediate), CAD Design (intermediate... ...regulated environment, focusing on physical sciences and engineering. The successful candidate will develop and manage...Hourly payContract work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Product Compliance and Test Engineer. Be the first to apply!
Related searches
- lead performance test engineer Everett, MA
- housing compliance Everett, MA
- regulatory affairs assistant Everett, MA
- compliance lead Everett, MA
- customs compliance Everett, MA
- compliance technician Everett, MA
- regulatory affairs Everett, MA
- regulatory compliance Everett, MA
- compliance team leader Everett, MA
- compliance Everett, MA






