Welder - Manufacturing
Philly Shipyard Inc
ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill and/or ability required.
Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes, and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions.
*Hanwha Philly Shipyard is a TOBACCO-FREE facility.
PHYSICAL DEMANDS
The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK
This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, and days and hours are determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE
- Ensure all Hanwha Philly Shipyard safety procedures, rules, and regulations are followed and met
- Knowledge and efficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by HPSI and Classification Society
- Welding process includes:
- FCAW - Flux Cored Arc Welding
- SMAW - Shielded Metal Arc Welding
- SAW - Submerged Arc Welding
- Automated Welding Process (use of tractors)
- Stainless Steel Fillet Welding
- Padding and preparing weld joints per WPS
- Carbon Arc Gouging
- Note: Not inclusive, shall be determined by vessel specification and classification rules
- Knowledge, understanding, and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard
- Knowledge and ability on how to use all welding-related tools, including basic troubleshooting and maintaining welding equipment to ensure a safe and efficient operation
- Welder must proficiently demonstrate welding ability through performance testing as determined by vessel project and classification
- Welder shall perform internal quality checks of their work performance to ensure quality standards are achieved. Be able to do their quality checks of their welds daily
- Welder must maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and Classification Society
- May be trained and required to weld using automated welding systems
- Perform other related duties as required and assigned
- Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards
- Flexible cooperation with team members
- Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather)
- Welder must be able to work in a team environment
- Workmanship assembly - Multi-position 4.5mm (+1.0 mm/-0.5mm) fillet welds
- Grind a weld without leaving scarred surface
- Requires Bend Test of 400mm long Vertical and Horizontal Groove
- Requires Bend Tests of 400mm long test coupons in accordance with Classification Society Rules
Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes, and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions.
*Hanwha Philly Shipyard is a TOBACCO-FREE facility.
PHYSICAL DEMANDS
The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK
This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, and days and hours are determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE
- High School Diploma or GED
- 3 to 5 years' work experience in businesses with heavy industrial or steel fabrication preferred
- 1+ years' work experience in heavy industrial with either an Associate Degree in Welding Technology or completion of the welding training program with PSI curriculum
- Welding robotics a plus
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Welder - Manufacturing in Conshohocken, PA vacancy
- ...expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads’... ...Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The...SuggestedShift work
$21 - $25 per hour
...Welder Location: 377 Crooked Lane, King of Prussia, PA, 19406, United States Employee Type: FT Non-Exempt Required Degree: High school Manage Others: No Contact information Name: Kyle Moser Phone: (***) ***-**** Email: ****@*****.***...SuggestedHourly payFlexible hours- ...to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads’ capabilities enable our customers to achieve superior results by deploying...SuggestedShift work
- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...welding-related tools, including basic troubleshooting and maintaining welding equipment to ensure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance testing as determined by vessel project and classification...Full timeWork experience placementFlexible hours
$37 per hour
...Job Description Job Description Combo Pipe Welders needed for multiple industrial process piping projects near the Newtown, PA area. This is a traveling position, you must have reliable means of transportation. You must be able and willing to fit your own pipe, and...Daily paidPermanent employmentFor contractorsWork experience placementImmediate start- ...Welder/Pipefitter Journeyman Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial... ...expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads'...Work at officeMonday to FridayShift workWeekend work
$20 - $28 per hour
Description: Job Purpose:Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times.Job Summary...Hourly payFull timeRemote work$26 - $35 per hour
...Join Our Team! Position: Fabricator/Welder Location: Lansdale, PA Pay Rate: $26.00 - $35.00 an hour (Negotiable) Are you... ...of experience as a millwright mechanic in an industrial or manufacturing environment ~ Proficiency in welding and fabrication (MIG, TIG...ApprenticeshipImmediate startMonday to FridayShift work- ...Job Description Job Description Overview The Welder performs preventive maintenance, fabrication welding, refurbishes refuse containers and compactors, rehabilitates scuffed paint, installs decals and ensures accurate repair and replacement of components. #INDSJ...Relocation packageAfternoon shift
$26 per hour
...Pipe Welders Labor One is currently hiring pipe welders in San Diego, CA at a shipyard. Pay rate is up to $26 + $160 per diem, if eligible. Job requirements include three years of experience in welding, knowledge of welding procedures, and various types of welding equipment...Daily paidCurrently hiringShift work- ...Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (***) ***-**** / (***) ***-**** *Please send us a text if we don't answer...Work at officeLocal areaFlexible hours
$17.66 per hour
...We are seeking a reliable and detail-oriented Spot Welder to join our production team. The Spot Welder is respoonsible for operating... ...policies. Qualifications Previous spot welding or manufacturing experience preferred. Ability to read and interpret blueprints...Hourly payFull time$40 per hour
...Welders WantedTradesmen International is immediately hiring experienced Welders for projects located in the Philadelphia, PA area. This is a first shift opportunity, and the pay rate is up to $40/hour based on experience and skill level. If you are a Welder and want to...Work at officeImmediate startDay shift$20 - $30 per hour
...Fabrication is looking for an experienced, dependable MIG/TIG Welder & Fabricator to join our team. We are a job shop specializing... ...! Company Description Craftweld Fabrication is a custom manufacturer of fabricated and machined metal parts, components, and assemblies...Hourly payFull timeShift work- ...Position Description Job Title: Welder Reports to: Weld Team Lead FLSA Status: Non-Exempt - Hourly Last Revised: 9.20.... ...without notice. Work Environment This job operates in a manufacturing environment. Expected Hours of Work This is a full-...Hourly payFull time
$40 per hour
...Description Tradesmen International is immediately hiring experienced Welders for projects located in the Philadelphia, PA area . This is a first shift opportunity, and the pay rate is up to $40/hour based on experience and skill level. If you are a Welder and...Work at officeImmediate startDay shift- ...Welder Position at Hanwha Philly Shipyard Essential Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill and/or ability required....Full timeWork experience placementFlexible hours
- ...Welding Position You will serve as a welder in the Department of the Navy to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...
- Job Title Job Description Help You will be identifying and associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You will be...
$30 per hour
...Job Description CTR Group is seeking experienced Structural Welders for the North-Eastern United States area for full-time positions. Travelers Welcome! Recently separated or retired Navy Hull Technicians encouraged to apply! 1st Shift Position: PAY RATE $30 per...Hourly payDaily paidFull timeWork experience placementDay shift- ...Job Description: Welder: Shift: 6 AM - 2:30 PM: Responsible for preparing and welding aftermarket custom exhaust components. Strong communication and math skills. Good interpersonal skills with the ability to communicate and interface positively with other...Local areaShift work
- ...Company Description: Welder: Trusted distributor and installer of refractory materials since 1937, known for its over 20 years of expertise in boiler repairs with an R Stamp certification. Based in Greater Philadelphia, our Trusted distributor and installer of refractory...Full time
- ...POSITION SUMMARY: The Container Welder/ Fabricator repairs, paints and performs maintenance to containers and roll-off boxes. PRINCIPAL RESPONSIBILITIES: Performs repairs and maintenance on front, rear and roll-off containers Weld steel and aluminum components...Contract workTemporary workLocal area
- ...expansive shipyard facilities and over 300,000 square feet of heavy manufacturing space located in The Navy Yard in Philadelphia. Rhoads’... ...Fitter is responsible for preparing and fitting pipe spools for welders and installs complex piping systems, for machinery, equipment...Flexible hoursShift workNight shiftDay shiftAfternoon shift
- ...for proper and safe work operations for assignments. You will analyze trade requirements through the use of audits, surveillance, and/or incident reports. You will provide instructions for nuclear and non-nuclear guidance and direction to Welder shop personnel....
- ...Structural Welder Labor One is currently hiring structural welders in Pascagoula, MS at a shipyard. Job requirements include three years of experience in shipyard, comprehension of written and verbal instructions in English, the ability to hear warning signals, read...Currently hiringShift work
$20 per hour
...Job Title: MIG/TIG Welder Job Description Join our dynamic team as a MIG/TIG Welder at a manufacturing company specializing in lift equipment. Responsibilities Pull and organize materials for production purposes. Set up steel parts into fixtures and fit...Weekly payContract workTemporary workMonday to FridayDay shift$20 per hour
...MIG/TIG WelderJoin our dynamic team as a MIG/TIG Welder at a manufacturing company specializing in lift equipment.ResponsibilitiesPull and organize materials for production purposes.Set up steel parts into fixtures and fit materials for welding.Adjust MIG Welding equipment...Contract workTemporary workMonday to FridayDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welder - Manufacturing. Be the first to apply!
Related searches
- chemical manufacturing Conshohocken, PA
- fabrication technician Conshohocken, PA
- manufacturing analyst Conshohocken, PA
- quality manufacturing Conshohocken, PA
- sales representative manufacturing Conshohocken, PA
- fabrication specialist Conshohocken, PA
- welding fabrication Conshohocken, PA
- manufacturing recruiter Conshohocken, PA
- electronic assembly manufacturing Conshohocken, PA
- industrial manufacturing Conshohocken, PA



