2nd shift - Spooler Operator (Mon.-Thurs.) 8pm-6:30am
Trinidad Benham Corporation
2nd Shift - Spooler Operator (Mon.-Thurs. 8pm-6:30am)
This position is based out of LaGrange, Georgia
Set up and operate the line in order to produce product that meets quality specifications, maintain the machine systems, make necessary adjustments, and troubleshoot common machine/quality problems.
Key Responsibilities
- Check the order sheet to determine order to run and specifications for that order. (Ensure that the right material is being used)
- Load the core hopper with cores.
- Set up and complete initial thread up of machine.
- Perform Quality Check at least once each hour.
- Monitor process, correct jams and other problems that occur.
- Maintain cleanliness and orderliness of line to GMP standards by removing cartons and other trash, removing dust and debris, etc.
- Troubleshoot minor quality and machine problems; communicate more complex problems to maintenance.
- Roll Prep
- Able to remove and replace mandrels.
- Any other duties as requested or required.
Skills, Knowledge and Expertise
- Fully Qualified:
- Level IV
- Operates assigned Spooler line at 90 % minimum average level of efficiency.
- Able to change core knives correctly.
- Ability to lift 50 lbs. Ability to stand ten hours (twelve during busy season) and walk up and down steps.
Benefits
- Employee-owned
- Advancement Opportunities
- Weekly pay
- Insurance coverage that includes medical, dental, vision and life insurance and flexible spending accounts
- 401(k) with employer match
- Paid holidays and competitive vacation/sick pay plans
- Tuition assistance program
- Employee stock ownership program (ESOP)
We are a 100% employee-owned company offering an Employee Stock Ownership Plan (ESOP). Trinidad Benham cares about you beyond a paycheck and a benefits package. We are culture of teamwork, creativity, pride, and ownership. Everyone at Trinidad Benham strives cohesively to offer exceptional products and service because we know our efforts result in a healthy bottom line and a thriving ESOP. We are planting the seeds for a more sustainable tomorrow. Become an owner today! Trinidad Benham Corporation is an equal employment opportunity and affirmative action employer that participates in the E-Verify program as required by law. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status or other legally protected characteristics.
Trinidad Benham- 2nd Shift Material Handler (Mon-Thurs) 8pm.-6:30am To provide material handling assistance to the production department. Key Responsibilities... ...metal and have ready prior to roll change. Assist pan operators in changing out parent rolls. Keep trays assembled...Afternoon shiftWeekly payFlexible hours
- 2nd Shift Production Relief, Level IV (Mon.-Thurs.) 8pm-6:30am Set up and/or operate the gluers and edgers in order to produce product that meets quality and production specifications. Perform material handling functions as needed. Key Responsibilities Operate...Afternoon shiftWeekly payFlexible hours
- ...Filler The Order Filler will support the operation to pull and sequence the orders received in... ...timely manner to meet the shipping deadlines. Shifts: 1st shift: Mon - Thurs 7:00am to 6:30pm / Friday 8:30am to 11:00pm 2nd shift: Mon - Wed 6:30pm to 7:00am / Thurs 6:...Afternoon shiftShift workDay shift
$17 per hour
...Manufacturing Operator I Follow all safety policies, procedures, and PPE requirements while maintaining a safe work environment... ...-toe boots are required. Starting Pay: $17.00 per hour. Shift Differentials: 2nd Shift: +$0.50/hour. 3rd Shift: +$1.00/hour. Mountville Rubber...Afternoon shiftHourly payWeekly payTemporary workShift workNight shift- ...Kitting Operator Facilitate in the manufacture of quality friction brake pads through the final inspection and packaging of goods to the customer. Position Duties And Responsibilities Include The Following. Other Duties May Be Assigned: Prepare boxes and other...Afternoon shiftImmediate start
$14 per hour
...workstations are clean and organized Any other duties assigned by the production supervisor or lead Shift Hours: ~1st Shift is Monday - Friday 7 am - 3 pm ($14.00 an hour) ~2nd shift is Monday-Friday 3pm- 11pm (14.50 an hour) ~3rd Shift has two options: Sunday - Thursday...Afternoon shiftTemporary workMonday to FridayShift workNight shiftDay shift- ...maintain the manufacturing line. This role involves operating machinery, inspecting parts for defects,... ...perform repetitive motions as required. Monday - Friday (some Saturdays) 1st shift 6:30am-5:00pm Sunday - Thursday (some Fridays) 2nd shift 5:30pm-6:00amAfternoon shiftMonday to FridayDay shift
- ...to ensure of accurate measurements. Key Responsibilities Operate and maintain a Graphic Laminator. Measure and cut out... ...Tuition reimbursement ~ Vision insurance Schedule ~8-hour shift ~2nd shift (3:00pm 11:00pm) ~ Holidays ~ Monday to Friday ~ Overtime...Afternoon shiftFull timeMonday to FridayShift work
- ...experience in driving safe and efficient operation of sit down and stand up... ...background. Hours: 1st Shift Hours: 50-60 Hours weekly Monday-Thursday 7:00am-6:30pm Friday 8:30am-11:00pm... ...needed by customer demand. 2nd Shift Hours: 50-60 Hours weekly...Afternoon shiftWeekly payTemporary workDay shift
- ...Power Equipment Operator Career opportunities in Power Equipment Operator roles include Lift Driver, Motorized Pallet Jack, Stock Picker... ...Qualifications Must have ~ Valid state-issued driver's license and 6 months experience operating tractor/trailer units. WalmartHourly payMinimum wageFull timeTemporary workPart timeLocal area
- ...depending on role and site. Eligibility for individual benefit plans may vary based on employment status. Position Summary Operator is responsible for performing processes to thermally apply pack aluminide coatings tasks as a part of a team to manufacture and...Afternoon shiftPermanent employmentLocal areaFlexible hoursNight shift
- ...Ability to stand for long periods and lift materials as needed Preferred (Not Required): MIG aluminum welding experience Welding certification or trade school coursework Manufacturing or fabrication shop experience 1st Shift 6:30am-5pm 2nd Shift 5:30pm-4amAfternoon shiftDay shift
- ...appearance tests of mix and test piece.Follow all safety guidelines with special emphasis on correct lifting procedures.Position requires operator to wear N95 disposable respirator.Safety glasses and hearing protection are required in this area.Strict adherence to 5S concept...Hourly pay
- ...Job Posting Official employment initiative for the Georgia Army National Guard. Job Description Operates equipment in the maintenance and repair of county roads and drainage systems. Operates equipment to load and unload trucks. Operates hand and power tools;...
- ...Combination Line Operator Facilitate in the manufacture of quality brake pads. Job Responsibilities Combination Line Operator:... ...and clean manner follow 5S concept. Know product schedule for shift and check to assure all product is available to meet requirements...Shift work
- ...Job Summary Must be able to operate the polyurethane robotic mat making system to meet the daily production needs. Promote a safe work environment and rectify any safety concerns. Facilitate duties designated by supervisor. Provide support in all daily operations. Oversee...
- ...Saturday; 5:30am10:30am Position Benefits More 1 on 1 care Consistent schedule. Early in time and out time, no 12 hour shifts nor is there a 2nd or 3rd shift. You will also never be on call Small nursing team. Depending on patient census, teams can range anywhere...Afternoon shiftTemporary workWork at officeMonday to FridayShift workNight shift
- Mauser Packaging Solutions is seeking a production teammate to contribute to safe, high-quality manufacturing processes. You will perform assignments with adherence to safety instructions and maintain clean work areas in a fast-paced environment. The role requires a High...
$15 - $20 per hour
...Machine Operator Job Title: Machine Operator Employment Type: Full-Time Location: Lagrange, GA Pay: $15.00 - $20.00 per hour Schedule: Depends on department Company Overview We are a diversified global manufacturer that produces a wide range of advanced materials,...Hourly payFull timeMonday to Friday- Trinidad Benham Corporation in LaGrange, GA is seeking a 2nd shift Lead Maintenance Technician to assist the Maintenance Manager, plan and implement plant projects, and support packaging operations to run safely and efficiently. The role requires five years supervisory...Afternoon shift
- MatWorks in LaGrange, GA is seeking an experienced Production Supervisor for 2nd shift to oversee mat production operations. You will monitor staff, organize workflows, and ensure a safe, efficient manufacturing process in a fast-paced environment. The ideal candidate...Afternoon shiftFull time
- Mountville Mills, Inc. in LaGrange, GA seeks an experienced Production Supervisor for 2nd shift to oversee mat production operations. The role focuses on maintaining a smooth, efficient manufacturing process, monitoring staff, and organizing workflows in a fast-paced environment...Afternoon shift
$15 per hour
...Manufacturing Equipment Operator Key Responsibilities: Operate and maintain manufacturing equipment according to standard operating... ...exposure to noise, dust, and temperature variations 1st shift - Monday-Friday, 7AM-3PM $15/hr Why work for Mountville:...Temporary workMonday to FridayDay shift- ...Combination Line Shift Lead Specialty: Production Position Summary: Facilitate the manufacture of high quality brake pads in... ...Responsibilities: A non-supervisory member of the work group who will assist operators and supervisors in accomplishing daily objectives on the...Shift work
- Respiratory Care Therapist (CRT/RRT) PRN Second Shift page is loaded## Respiratory Care... ...addition, therapists assists in departmental operations by addicting with quality improvement projects... ...Cardiovascular Life Support due within 6 months of hire.Neonatal Resuscitation...Afternoon shiftWork experience placementReliefSecond job
- ...MEAT CUTTER DUTIES: -Meat cutting and merchandising with proper trim -Responsible for safe operation and maintenance of meat cutting equipment including band saws. -Following proper Safety and Sanitation Procedures -Assist in ensuring newer meat wrappers and...Traineeship
- ...might be the perfect fit for you! Opportunity Highlights Schedule: Weekend Days: 8a-5p EST or 9a-2p EST (Highest Priority); Swing Shift: 12p-8p EST (short shifts okay); 7 days/week coverage available Job Setting: Remote Diagnostic Radiology (Tele), EMH, STC, MCY...Afternoon shiftWeekly payPermanent employmentFull timeTemporary workLocumImmediate startRemote workShift workNight shiftWeekend work
- Vulcan Materials Company in Georgia seeks a reliable Transport/Plant Support worker to drive trucks or operate heavy equipment for material transport and unloading. The role includes maintaining stationary machinery, using tools, and assisting with yard and plant upkeep...
$25 - $38 per hour
Job Description Job Description Speed machine cnc machinist posting · MD CNC Machinist Speed Machine LLC — LaGrange, GA Full-Time | $25–$38/hr, depending on experience About Speed Machine LLC Speed Machine LLC is a small, precision CNC machine shop based...Full time- ...imaging with overnight STAT inpatient exams Schedule Details Weekend Days: 8:00 AM–5:00 PM EST (or 9:00 AM–2:00 PM EST) Swing Shift: 12:00 PM–8:00 PM EST (short shifts may be considered) Minimum Performance Requirement: 64 RVUs per shift Clinical Scope...Afternoon shiftWeekly payFull timeContract workLocumImmediate startRemote workShift workNight shiftWeekend workDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to 2nd shift - Spooler Operator (Mon.-Thurs.) 8pm-6:30am. Be the first to apply!
- ski lift operator Lagrange, GA
- machine set up operator Lagrange, GA
- operator Lagrange, GA
- ambulance operator Lagrange, GA
- soldering operator Lagrange, GA
- refrigeration operator Lagrange, GA
- refinery operator Lagrange, GA
- service operator Lagrange, GA
- automation operator Lagrange, GA
- coating operator Lagrange, GA



