MACHINIST LEADER
DEPARTMENT OF THE NAVY HEADQUARTERS
Summary You will serve as a MACHINIST LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills.
- You will utilize many types of precision instruments and equipment such as vernier calipers, squares, protractors, micrometers, vee blocks, parallel bars, dial indicators, comparators, different gauges for accurate dimensions and tolerances.
- You will plan and lay out work from blueprints, work sheets, and drawings that may have missing or incorrect information.
- You will use shop mathematics and handbook formulas in computing and verifying dimensions in the planning, laying out, and final dimensional checking processes.
- You will produce desired cuts and finishes on various metals and other materials such as aluminum, brass, bronze, high carbon and alloy steels, chrome, nickel, titanium, molybdenum, super alloys, nylon, rubber, plastics, teflon, etc.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This may be a bargaining unit position.
- You may be required to successfully complete a pre-appointment physical examination.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
- A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
- You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
- This position may require exposure to high noise levels.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard : ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the MACHINIST LEADER in Philadelphia, PA vacancy
- ...Summary You will serve as a MACHINIST LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- Job DutiesYou will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills.You will utilize many types...Suggested
- ...Summary You will serve as a MACHINIST LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This...SuggestedPermanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
- ...and overhaul marine components from start to post-work review. Passes instructions received from supervisors and provides overview of tasks to be performed to other workers. Serves as an Expert Machinist leading a group to ensure work assignments are completed....Suggested
- Job DutiesYou will use various types of conventional and/or computer numerical control (CNC) machine tools and their attachments to perform machining operations in the repair and/or manufacture of parts from raw stock.You will determine work procedures, machine, tools,...Suggested
- ...Job Description Job Description MACHINIST, CNC COMPANY PROFILE: Fluidyne Corp is a well respected prime contractor that manufactures custom valves for the Navy. The majority of our business supports the Navy’s critical Nuclear Propulsion and Level I/Subsafe programs...For contractorsRelocation packageWeekend workAfternoon shift
$28 - $36 per hour
...~ EDM Qualifications Years of experience: 2 years Experience level: Experienced Randstad is a world leader in matching great people with great companies. Our experienced agents will listen carefully to your employment needs and then work...Permanent employmentTemporary workWork experience placementShift workDay shift$25 - $28 per hour
...Job Description Job Description Job Title: Manual Machinist Pay: $25-$28 Hours : 7:30am-4pm Monday-Friday Job Description... ...clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit:...Weekly payContract workTemporary workMonday to Friday$18 - $30 per hour
...Now Hiring Experienced CNC Machinists! Schedule: Monday-Friday, 1st Shift or 2nd shifts available Pay Rate: $18-$30 per hour (based on experience) Position Overview We are currently seeking skilled CNC Mill Machinists to join our team. This role is ideal for...Hourly payPermanent employmentImmediate startMonday to FridayDay shiftAfternoon shift$33.28k - $52k
...MachinistOur client, a leading manufacturing organization, is seeking a Machinist to join their team. As a Machinist, you will be part of the manufacturing department supporting production operations. The ideal candidate will have attention to detail, strong technical...Afternoon shift- ...CNC Machinist Since 1946, The Jet Pulverizer Company, Inc. has been dedicated to providing state-of-the-art processing equipment and services. Our continuous technological advancement in Micron-Master® Jet Pulverizers and ongoing modernization and expansion of our Custom...Full timeMonday to FridayShift workDay shift
- ...Job Description Job Description We are looking for an experienced Manual Lathe Machinist to complement our existing staff and help meet increasing demand! Responsibilities: Oversee Manual machine setup and operation Follow fabrication procedures established...Local area
- ...Position Summary The Manual Machinist performs unusual, specialty and highly diversified machinists work of irregular shapes and alloys such as stainless steel. Will be responsible for machining, light finishing, and miscellaneous work assignments and duties as assigned...Contract workWork at office
- ...Employee Assistance Program (EAP) • And more! Responsibilities & Expectations: We are looking for a skilled Manual Machinist to join our team. As a Manual Machinist for IPS, you will identify problems and make necessary adjustments as they relate to...For contractorsWeekend work
- Job Posting OPEX Corporation is looking for full time Manual Milling Machine Operators to work in our 180,000 sq. ft. manufacturing facility in Pennsauken, NJ. We are hiring for our first and second shift. The worker will be required to work both manual mill and manual...Full timeShift workWeekend workAfternoon shift
- Independent Alteration Professional Join our network of independent alteration professionals specializing in bridal and wedding wear. What you'll do includes altering wedding gowns, bridesmaid dresses, and mother-of-the-bride/groom dresses (hemming, bustle, bodice/waist...For contractorsLocal areaRemote workWork from homeAfternoon shift
- From Aisle to Algorithm and for All Life’s Moments, at David’s Bridal, we empower our customers and our employees to stay true to their dreams and find the one, whether that means the event or the wedding dress that matches a personal style—or the career that is a perfect...Part time
- Benefits: 401(k) matching Free uniforms Paid time off Seeking an energetic Seamstress for our Philadelphia location! Come join our team! Uniform Gear services public service workers throughout the Philadelphia area, including Police, Fire, Ems, Transportation...Shift work
$22 - $26 per hour
...NOW HIRING! 100+ JOBS OPEN | WALK-INS WELCOME Position: Manual Machinist Location: Philadelphia, PA Pay: $22-$26/hour Hours: Monday - Friday | 2:00 PM - 10:30 PM What You'll Do Set up and operate manual mills and lathes to produce precision parts...Immediate startMonday to Friday- ...Manual Machinist - Craftsmanship Still Matters Are you a true Manual Machinist who takes pride in your craft? Do you enjoy setting up your own work, machining one-of-a-kind parts, and solving challenges that require experience, skill, and ingenuity? At In-Place Machining...Weekend work
- Job Description Position Summary OPEX Corporation is looking for full time Manual Milling Machine Operators to work in our 180,000 sq. ft. manufacturing facility in Pennsauken, NJ. We are hiring for our first and second shift. The worker will be required to work...Full timeTemporary workShift workWeekend workAfternoon shift
$120k - $180k
...GFT is seeking a Bridge Engineer/Bridge Inspection Team Leader to join our Transportation group in Meriden, CT . This role follows a hybrid work model, based out of our Meriden, CT office . Sign-on and relocation bonuses may be available based on position...Work at officeRemote workRelocation package$35 - $45 per hour
...Job Description Job Description Toolmaker Machinist Fastener Dimensions, Inc. Pennsauken, NJ ~$35 to $45 per hour - based on experience ~ Full Time – 7:00 AM to 3:30 PM ~6 Paid Holidays ~ PTO, 401K, Sick Time ~ Medical, Dental, Vision & Life Insurance...Hourly payFull timeTemporary workApprenticeship- ...Leader In Training The Leader In Training (LIT) is an adaptable and essential part of the RISE Dispensary leadership team that prioritizes delivering memorable, positive consumer experiences. As part of the leadership team, you have a key role in actively supervising...Work at officeLocal areaShift workNight shiftWeekend workDay shift
$18.3 - $24.8 per hour
...Merchandise LeaderAs the Merchandise Leader, you are the Merchandising Team Leader's right hand in ensuring your store is always rocking AEO Brand Visual Standards. Your expertise lies in executing effective Floorsets, marketing and merchandising updates; plus, you ensure...Full timePart timeSeasonal workLocal areaFlexible hoursShift workWeekend workAfternoon shiftEarly shift$3,500 per month
...and wellness company. Our mission is to improve the lives of pets, pet parents and each other. Vetco Total Care Hospital Medical Leaders ensure the highest level of patient care and client experience, drive continuous improvement in clinical skills and cultivate a...Minimum wageFull timeLocal areaRelocation packageFlexible hoursShift work- ...Team Leader A Team Leader is one who consistently demonstrates our core values, embraces the Chick-fil-A culture and has a servant's heart. They have a passion for people and serving others, have strong character, take initiative and work with a sense of urgency at all...Full timePart timeImmediate startFlexible hoursShift work
$17.02 per hour
...Team Leader Opportunity at Jeni's Splendid Ice Creams Philly, our Team Jeni's Team Leaders have the opportunity to earn an average of $17.02 per hour! This is an estimate of hourly earnings. It is based on the 2026 base pay rate, plus 2025's hourly tip average....Hourly payPart timeShift workNight shiftWeekend work$55.6k - $118.7k
...passports and other supplies are on hand to meet current and anticipated demand. This position is located in Philadelphia, PA.The Section Leader leads and manages a team of Support Associates. Responsibilities include setting work priorities and ensuring a smooth transition...Contract workFor contractorsWork at office$248.39k
...difference and change the world. Job Description The Infrastructure Services Group is seeking an Energy and Power Discipline Leader. This is an exciting opportunity to support the growth of CDM Smith’s energy and power service offerings. This position calls for subject...Work experience placementH1bLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to MACHINIST LEADER. Be the first to apply!
Related searches
- maintenance machinist Philadelphia, PA
- production machinist Philadelphia, PA
- machinist Philadelphia, PA
- zone leader Philadelphia, PA
- integration team lead Philadelphia, PA
- clinical team leader Philadelphia, PA
- underwriting team lead Philadelphia, PA
- quality assurance team leader Philadelphia, PA
- group manager Philadelphia, PA
- team supervisor Philadelphia, PA



