CNC Machinist
$25 - $30 per hourSkilled Craftsmen of Texas, Inc.
Job Position: CNC Machinist
Location: Houston, TX 77041 Pay: $25-30 USD per hour Shift: Description: Job Description - 5-Axis CNC Machinist (Haas UMC-500)Location: Houston, TX
Type: Full-time, 4 days/ 10 hours per day Reports to: CAM Programmer Small, owner-operated CNC machine shop with fewer than 10 people.
We make precision machined parts for Oil & Gas, Valve and Instrumentation OEMs. We have just added a
Haas UMC-500 - our first 5-axis machine - and we are looking for an experienced machinist to set it up
and run it, working hand in hand with our programmer to build our 5-axis capability from the ground up.
In a shop our size, everyone's work is visible and matters. You'll work directly with the owner, have real
input into tooling, fixturing and process decisions, and won't be buried under layers of management. The Role
You will be the primary setup machinist/operator for the Haas UMC-500 (5-axis trunnion, Haas NGC
control). Programs are written by our in-house programmer; your job is to set up and run them safely
and accurately, take jobs from setup sheet to finished, inspected part, and work closely with the
programmer to prove out new programs. We need someone who follows setup instructions and
procedures methodically, checks their work at every step, and communicates clearly when something
doesn't look right. Because this is a new machine for us, you'll also help build consistent setup,
inspection and maintenance routines. Responsibilities
• Set up and operate the Haas UMC-500 following the programmer's setup sheets: work holding,
work offsets, tool length offsets and rotary positioning on the trunnion table
• Load, measure and verify tools against the tool list; keep the machine's tool table accurate
• Prove out new programs with the programmer: single block, reduced rapid and feed overrides,
clearance checks at tilt angles
• Report issues clearly (chatter, poor finish, dimensions trending, interference) and work with the
programmer on fixes rather than making unapproved program changes
• Make approved offset and wear adjustments at the control to hold tolerance
• Use Haas features such as Dynamic Work Offset (G254) and Tool Center Point Control (G234) as
called for in programs; run the WIPS probe and the MRZP calibration routine as needed
• Read and interpret engineering drawings, including GD&T; perform first-article and in-process
inspection with hand gauges, height gauge, indicators and [CMM, if applicable], and record
results
• Follow documented procedures step by step, and help keep setup sheets up to date with notes
and photos so jobs repeat reliably
• Perform routine machine maintenance and keep the machine and work area clean and
organized
• Help out on other machines and shop tasks (deburr, inspection, shipping) when needed -
everyone pitches in
• Train other team members to run proven jobs on the UMC-500 over time
Required Qualifications
• 5+ years of CNC milling experience, with independent setup and operation of vertical machining
centers
• Hands-on 5-axis setup and operation experience (3+2 positional at minimum) on a trunnion or
table-table machine
• Able to read G-code and M-code well enough to follow a program, spot problems, and prove it
out safely
• Strong blueprint reading and working knowledge of GD&T (position, profile, flatness,
perpendicularity, MMC/LMC)
• Proficient with precision measuring tools: micrometers, calipers, bore/pin gauges, indicators,
height gauge
• Shop math: trigonometry, bolt circles, speeds and feeds
• Methodical and detail-oriented: follows setup sheets, checklists and instructions consistently,
and doesn't skip steps
• Works well with a programmer: gives clear, specific feedback and asks before changing anything
• Safety-minded, with a habit of verifying before pressing Cycle Start
Preferred Qualifications
• Experience on Haas UMC-series machines and the Haas NGC control specifically
• Experience with Haas WIPS probing and the MRZP calibration routine
• Experience with 5-axis work holding (dovetail or self-centering vises, raised fixtures)
• Experience helping bring a new machine into production
• Experience in [aerospace / medical / oil & gas / your industry] or with [ISO 9001 / AS9100]
quality systems Physical Requirements
• Stand for extended periods; lift up to 50 lbs.
• Wear required PPE (safety glasses, safety shoes)
What We Offer
• Health insurance / paid time off / holidays
• A brand-new 5-axis machine and the chance to shape how we use it
• Direct access to the owner and real influence over tooling, process and equipment decisions
• Stable, steady work in a small, respectful team Shortlisted candidates will complete a written technical test (about 75 minutes) and a shop-floor
interview with the owner.
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the CNC Machinist in Houston, TX vacancy
- ...Apply through hireCNC Responsibilities: Set up and operate CNC LATHES Write and edit G-code at the machine Perform... ...smoking facility Background check required Apply Interested machinists can apply directly through hireCNC. Apply Now or Save This...SuggestedFull timeShift workDay shiftWeekday work
- ...exists to support continued production demand and engineering-driven work across GP&C’s advanced manufacturing operations. As a CNC Machinist (Machinist II) , you’ll play a key role in producing precision, tight-tolerance components used in mission-critical...SuggestedFull timeFlexible hoursShift workDay shift
- ...6pm–6am Experience: Senior-level, 7+ years on manual and/or CNC machines Department: Ledbetter Machining Machines: Manual... ...worth considering General Plastics & Composites is hiring a Machinist III for its Ledbetter Machining department in Houston, Texas. This...SuggestedFull timeMonday to FridayShift work
$22 - $35 per hour
...2nd Shift Experience: 3+ years Machines: GNL VTC-2000 (CNC vertical turning lathe / mill-turn) Controls: Siemens 840D... ...High Bay section, and this VTL opening is one of three founding machinist seats on that team. You'll run a GNL VTC-2000 mill-turn with Siemens...SuggestedFull timeRelocationRelocation packageMonday to FridayAll shiftsShift workDay shiftAfternoon shift- ...Randstad - [Production Operator / Machinist] As a CNC Machinist at Randstad, you'll: Operate machinery; Perform maintenance and monitor the output of machinery; Visually inspect production for flaws and sort, organizing and prepare output for shipment...Hiring Immediately...SuggestedImmediate start
- ...Kelly Services, Inc. - - Responsibilities: Operate CNC machines from drawings and specs; Perform machine set-ups for close tolerances; Conduct first-piece and in-process inspections; Maintain time/parts/inspection records; Troubleshoot machining issues and make decisions
- ...Rankin Road) Duration: 6+ months Key Skills: 5?axis, mill turn programming, GD&TSummary: Seeking a skilled Machinist for precision manufacturing. Must be proficient in CNC and manual machines, setups, and blueprint/GD&T interpretation.Responsibilities:Operate CNC & manual...
- Onin Staffing - - Responsibilities: Set up and operate CNC and manual equipment; Load and unload raw materials; Edit CNC programs and troubleshoot errors; Inspect parts using precision measuring tools; Perform preventive maintenance and support tooling issues
$22 - $30 per hour
...Job Position: CNC Lathe Machinist Location: South Houston, TX 77587 Shift: Days (M-F) some Saturdays 7:00am-3:30pm with possible OT. Description: Pay DOE $22.00 - $30.00 hr. Lathe operators Knowledge with threads and inspection tools using gage maker...Shift work- ...Health insurance Paid time off 401(k) matching Competitive salary Alart Machine Corp. is looking for an experienced CNC Mill Machinist who knows their way around a machine shop and takes pride in producing quality parts. We need someone who can read prints,...
- ...CNC Machinist Set up and operate CNC machines (mills, lathes) to manufacture parts to precise specifications. Interpret blueprints, process routers, and work instructions to determine machining requirements. Perform machine setups, including selection and installation...
$27 per hour
CNC Mill MachinistThe ideal candidate will have experience operating and setting up CNC milling machines, reading blueprints, and producing... ...standards.QualificationsPrevious experience as a CNC Mill Machinist.Ability to set up and operate CNC milling machines.Experience...- ...Job Description Job Description We are hiring an experienced CNC Lathe Machinist for a climate-controlled Houston machine shop . The shop primarily operates Doosan and Mori Seiki CNC lathes and is looking for a machinist with strong setup and operating experience...
- ...OverviewWe are seeking a skilled CNC Machinist to join our dynamic team in Houston, TX, 77017. In this role, you will be responsible for operating and programming CNC machines to produce high-quality parts and components. If you have a passion for precision and a knack...
- ...As a CNC Machinist, you will play a crucial role in our manufacturing process. Your primary responsibility will be to set up, operate, and monitor CNC machines to produce parts according to provided drawings, specifications, and quality standards. This role requires a...
- ...CNC Machinist II | Star Pipe Products - Houston, TX 77082 SUMMARY Star Pipe Products is seeking a skilled CNC Machinist II with expertise in Mazak, Fanuc, and HAAS equipment to join our manufacturing team. In this role, you will set up, operate, and monitor CNC machines...Work at office
$28 - $32 per hour
...CNC Lathe Machinist Pay: $28-$32 DOE Shift: 5am-1:30pm M-F | No weekends Location: Houston, TX 77081 Start: ASAP Responsibilities & Qualifications Operate a 120" Fryer Combo Lathe with Siemens conversational controls. Machine 4140 and 41...Immediate startShift work$25 - $40 per hour
...Machinist Opportunity At Stewart Precision Do you take pride in producing work that must be right the first time, every time? Do you excel... ...exact specifications and tight tolerances Setup and operate CNC lathes or mills, ensuring correct tooling, programs, and job...Flexible hoursShift workNight shiftDay shift$1,650 per week
CNC MachinistCNC Machinist - $1,650+ WEEKLY WITH OT Join Savard Personnel Group - where your skills are valued! Key Requirements: 5+ years of CNC machining experience. Experience with FANUC controls required. Experience with Vertical Turning Lathes (VTL) or 4-jaw chucks...Hourly payPermanent employmentTemporary workMonday to FridayShift workNight shiftDay shift- ...Job Description Job Description CNC Operator Job Description Responsibilities: CNC VTL operator is responsible for setting up and operating CNC vertical lates to machine parts. Please see the requirements for this role: ~3+ years of experience operating...
- Job Title Location 4018 Westhollow Parkway, Houston, TX, 77082, United States Employee Type FT Hourly Non-Exempt Required Degree High School Manage Others No Minimum Experience 5 Years Description Requirements SummaryHourly pay
- ...The potential candidate shall be proficient in all aspects of CNC programming, machining and inspection. The applicant must be... ...Qualifications: The applicant must have completed a 4 year Machining/Machinist journeyperson apprenticeship program or hold an associate degree...ApprenticeshipFreelance
- ...Job Description Job Description We are seeking a CNC Machinist to operate one type of CNC machine as an individual contributor in a high-volume production environment. This role follows a rotating shift structure and focuses on producing precision components while...Rotating shift
- ...Job Description Job Description Job Title: CNC Machinist / Operator Company: Superior Threaded Products (STP) Location: Houston / Humble, TX (East Houston / Beltway 8) Job Type: Full-Time + OT (40-50 hours) Pay & Benefits: Competitive Pay + 90-day probation...Full timeTrial period
- Machinist Horizontal LatheSchedule: 2nd shift or 3rd shift availableAir-conditioned modern shop located in Northwest Houston & room for advancement... ...the following duties.Job Responsibilities:Experience on CNC lathe or millInstall chuck jaws and or fixtures on machineSet-Up...Immediate startNight shiftAfternoon shift
$20 - $26 per hour
...CNC MachinistInnova HR Solutions is seeking a CNC Machinist to work with a local manufacturing company in Houston, TX. Our client offers a comprehensive benefits package designed to support their employees health, well-being, and financial security.What's in it for youCompetitive...Full timeLocal areaShift work- ...Position: CNC Machinist Schedule: 2nd shift or 3rd shift available Schedule: Air-conditioned Modern Shop located in Northwest Houston & room for advancement for the right individual Position Overview: This position is responsible for setting up and...Immediate startNight shiftAfternoon shift
- ...CNC Lathe Machinist We are hiring a CNC Lathe Machinist to support our manufacturing operation in a shop-based environment. This role is focused on independently setting up and operating Fanuc-controlled Haas and Willis lathes to produce precision parts to print, maintain...Shift work
- ...CNC Machinist II - Mfg - Night ShiftHouston, TX 77029OverviewLevel ExperiencedDescriptionThe CNC Machinist will manage computer numeric controlled (CNC) equipment from setup to operation, producing parts and tools from different resources. The Machinist will be tasked...Night shift
$25 - $28 per hour
...Job Overview: Pay Range: $25.00hr - $28.00hr Requirement/Must Have: High school diploma or GED. 5+ years of related CNC experience. 2+ years Manual machinist experience. Experience in ERP systems. Ability to read and interpret schematics and Bills of Material (BOM)....Immediate start
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Machinist. Be the first to apply!
Related searches



