Assembler

SCOPE OF POSITION:

Working under minimum supervision, performs various manufacturing operations on jobs. Includes manufacture of subassemblies and final assembly.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, including but not necessarily limited to the following:

• Receives work assignments from department Production Supervisor.

• Completes assigned tasks alone or assists others in various tasks.

• Ensures that guards and safety devices are installed on equipment used and are operating properly. Performs required equipment safety inspections. Reports any discrepancies to Production Supervisor and shuts equipment down.

• Adjusts and operates saw equipment to cut extruded stock, metal and plastic to the size and shape specified by the work order. Positions fixtures and clamps to properly locate direction of cut.

• Uses other shop equipment as needed such as hand drill or drill press, punch and die press, fixed router, nut drivers and heat forming equipment.

• Performs assembly using materials and parts designated by the work order, production sheet, drawings, or catalog specifications. Follows established procedures and operations prescribed to assemble products.

• Performs simple and repetitive manufacture or make up of sub assemblies for stock.

• Ensures conformance to all aspects of the ISO 14001 standard and Construction Specialties' Environmental Management System (EMS), including its environmental policy while performing job functions that may have a significant impact on the environment.

• Performs on going quality control of own work such as using color chips to verify correct color, product (extrusion) samples for correct size and shape, and measuring devices to verify correct lengths/widths.

• Follows directions to perform other company related work when time permits or when directed.

• Maintains work area, equipment and supplies in a neat and orderly condition.

• Reports any problems or difficulties to Production Supervisor or Production Services Manager.

• Ensures that hazardous material and waste handling is conducted within the guidelines of the training provided.

• Performs other duties assigned by management

• Request material as needed via pull list.

• Assures quality of work through accuracy, neatness, paying attention to details, thorough understanding of information, with minimal amount of rework. Conveys personal commitment to quality by demonstrating good quality behavior. Identifies and acts upon opportunities to improve quality of material or process.

• Ensures conformance to all aspects of the ISO 14001 standard and Construction Specialties' Environmental Management System (EMS), including its environmental policy while performing job functions that may have a significant impact on the environment.

• Follows directions to perform other company related work when time permits or when directed

• Scan time and quantities in BPCS for work performed.

• Reviews job requirements and checks completed work to ensure that manufactured or assembled products comply with requirements and meet quality standards.

KNOWLEDGE/ SKILLS/ EXPERIENCE/ EDUCATION: (Minimum Education and/or Experience required)

• High school diploma or general education degree (GED) and six to twelve months related experience and/or training; or equivalent combination of education and experience.

• Will require training with respect to guidelines for hazardous material and waste handling within six (6) months of hire and annually thereafter.

• Demonstrated ability to read and comprehend a tape measure to the 1/16th, work orders, drawings and work instructions.

• Ability to operate table saw, band saw, drill press, hand drill, nut driver, nail/staple gun, punch/die press, router, shaper, heat former/welder, miter saw, sander, rivet tool and measuring devices.

• While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools or controls; and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch or crawl and talk or hear. The employee is occasionally required to sit; climb or balance, and taste or smell.

• The employee must regularly lift and/or move 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus.

CONSTRUCTION SPECIALTIES, INC.

Founded in 1948, Construction Specialties (CS) is a specialty building products manufacturer. CS provides solutions to building challenges that architects, designers, building owners, facility managers, and contractors face every day. Since inventing the first extruded louver, CS has become a global leader in all our product categories. Our products are a part of some of the most iconic buildings around the world-from the world's tallest tower, Burj Khalifa in Dubai, to the Oculus at the World Trade Center Transit Hub in Manhattan. If you want to work in an inspiring atmosphere and collaborate with customers and colleagues to solve challenges, we're the right place for you. CS: People. Buildings. Better.

Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, or any other characteristic protected by applicable federal, state or local law.