Quality Inspector
$30kTrigo Group
Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI’s as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. Aerospace line experience required Job Responsibilities: Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI’s – AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection) Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation Process warehouse materials Rely on instructions and pre-established guidelines/procedures to perform the functions of the job Support positive corrective actions and identification of root cause Other duties as assigned. Required Skills Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI’s – AS9102 Experience with hand measurement tools MS Outlook, and EXCEL experience Experience with hand measurement gages, conduct conventional inspection to engineering requirements Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Valid drivers license and auto insurance required. Additional Desired Skills: Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem solving General Requirements Ability to handle complex situations and solve complex problems Ability to work effectively under pressure to meet deadlines Ability to press and analyze technical and business information Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers Ability to remain seated for up to 5 hours at a time Fluent English – reading and writing is required Professionalism, integrity, and exceptional attention to detail Strong independent decision-making skills; excellent analytical skills and professional judgment Excellent interpersonal, written, and verbal communication skills Must be able to simultaneously manage several objectives Must be detail oriented, organized, and self-motivated Additional Qualifications (Preferred): 3+ years’ experience as a quality inspector or technician. 3+ years’ experience in an aerospace manufacturing facility 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation Proficient with Microsoft Office products Detail oriented Any combination of education and experience may be considered Vision Exam Requirements: The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. 4.15.2 Visual Acuity Operators and inspectors involved with electronics manufacturing are to be tested annually by a medical professional and must meet one of the following near vision standards. Tumbling E in accordance with ISO 18490 Jaeger No 1 at not less than 12 inches (30.48cm)* * With at least one eye, either natural or corrected Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI’s as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. Aerospace line experience required Job Responsibilities: Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI’s – AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection) Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation Process warehouse materials Rely on instructions and pre-established guidelines/procedures to perform the functions of the job Support positive corrective actions and identification of root cause Other duties as assigned. Required Skills Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI’s – AS9102 Experience with hand measurement tools MS Outlook, and EXCEL experience Experience with hand measurement gages, conduct conventional inspection to engineering requirements Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Valid drivers license and auto insurance required. Additional Desired Skills: Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem solving General Requirements Ability to handle complex situations and solve complex problems Ability to work effectively under pressure to meet deadlines Ability to press and analyze technical and business information Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers Ability to remain seated for up to 5 hours at a time Fluent English – reading and writing is required Professionalism, integrity, and exceptional attention to detail Strong independent decision-making skills; excellent analytical skills and professional judgment Excellent interpersonal, written, and verbal communication skills Must be able to simultaneously manage several objectives Must be detail oriented, organized, and self-motivated Additional Qualifications (Preferred): 3+ years’ experience as a quality inspector or technician. 3+ years’ experience in an aerospace manufacturing facility 3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation Proficient with Microsoft Office products Effective communication skills Detail oriented Any combination of education and experience may be considered Vision Exam Requirements: The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. 4.15.2 Visual Acuity Operators and inspectors involved with electronics manufacturing are to be tested annually by a medical professional and must meet one of the following near vision standards. Tumbling E in accordance with ISO 18490 20/25 (Snellen) at 16 inches (40.64cm), +/- 1 inch (2.54cm)* Jaeger No 1 at not less than 12 inches (30.48cm)* * With at least one eye, either natural or corrected Color vision requirements: Operators and inspectors must be able to distinguish and differentiate between red, green, blue, and yellow at a minimum as prescribed in Dvorine Charts, Ishihara Plates, or AO – HRR Tests. Valid Driver’s License Valid Auto Insurance WORKING CONDITIONS Productivity : Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision : Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: 12 days paid vacation first year, increasing with service years 10 days paid sick time 11 paid holidays Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Champ Plan Wellness and Health Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings Participation increases net take home pay $$$ in most instances Free wellness initiatives Free tele-health Free and discounted RX Auto enrollment (unless tax elections result in negative impact) Eligible on the 1st of the month following 30 days of continuous employment Requires monthly 10-minute wellness activity participation 401k retirement savings with match Eligible on the first (1st) of the month following 90 days of continuous employment 100% match of 1st 3% contribution 50% match of next 2% contribution IMMEDIATE VESTING Company-provided cell phone, laptop, mobile wi-fi (for business use only) Regular Hourly rate for travel time Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Federal rate Mileage reimbursement when driving personal vehicles on company business Per diem reimbursements for meals and incidentals $1500 EMPLOYEE REFERRAL BONUS Initial $750 paid upon hire of qualified referred employee (rehires excluded) Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range $36.00 -$41.00 per hour, pleasenote that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well asmarket and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded“boots on the ground”business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer , including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . #J-18808-Ljbffr
- ...QA/QC Inspector Location: Greater Raleigh area, NC | Travel: potential for daily local travel Job Summary: Oversee and enforce... ...standards. As a QA/QC Inspector, you’ll play a key role in upholding quality and precision across complex high‑purity and biopharmaceutical...SuggestedDaily paidFull timeContract workFor contractorsFor subcontractorWork at officeLocal area
- ...extraordinary flow control solutions that strengthen today's world while building tomorrow. Your Role and Impact As a Quality Control Inspector, you will help ensure Flowserve products meet customer, engineering, quality, and regulatory requirements. You will...SuggestedTemporary workRelocation packageFlexible hours
$17.5 per hour
...Quality Control Warehouse Associate We are looking for a reliable, experienced, and detail oriented Warehouse Associate to perform quality inspector duties at a fast-paced door manufacturer/distributor in Raleigh, NC. If you have previous experience in a similar role...SuggestedMonday to Friday- ## Quality Control InspectorApplylocations: Browns Summit, NC (EAS - Reedy Fork)time type: Full timeposted on: Posted Yesterdayjob requisition id: JR106418**POSITION DESCRIPTION**: Conducts various quality control functions to include inspections, testing and monitoring...Suggested
- ...hardworking individuals dedicated to delivering innovative, high-quality foam products for the bedding and furniture markets and beyond.... ...that help you rest comfortably. Job Summary: The Quality Inspector’s primary responsibility is to ensure all products meet customer...Suggested
- ## Quality Assurance InspectorApplylocations: Headquarters - Timberlake, NCtime type: Full timeposted on: Posted 2 Days Agojob requisition... ...## About the RoleVoltage is seeking a detail-oriented Quality Inspector – Incoming Inspection to ensure all incoming materials meet...Full timeH1b
- ...and services in more than 110 countries and regions. This position is on-site only at our Clayton, NC Facility. Summary Quality Assurance Inspectors work with manufacturing operations during the production process, by approving the raw materials and associated documentation...Afternoon shift
- ...Site Quality InspectorDriven by Vision | Industrial-Strength Construction | Powered by PassionAre you looking to work for a successful... ...BMWC is an industrial construction company seeking a Site Quality Inspector to join the Quality Team. This crucial position allows you to...Work at office
- ...Quality Inspector Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies...Full timeWork experience placementImmediate start
- Job Profile Summary The Environmental Compliance Specialist supports the Environmental Shared Services (ESS) group with tasks related to environmental compliance of underground storage tank (UST) systems within an assigned Business Unit (BU) including invoicing, data entry...For contractorsWork at officeLocal areaRemote work
- ...Quality Assurance InspectorQuality Assurance is responsible for supporting daily operations, ensuring quality standards are being met, and improving the manufacturing process by removing waste and change. A day in the life Every day at Hubbell is different and you'll contribute...Work at office
- ...manufacturing facility and has a base schedule of Wednesday through Saturday 7:00 a.m. to 5:00 p.m.*** **All About This Role:**The Quality Inspector is responsible for inspecting and testing components, subassemblies, and finished products to verify conformance with...Full timeWork experience placement
- ...Job Overview The Quality Inspector will be responsible for daily tasks associated primarily with inspecting quality products. This includes primarily the inspection and testing of electrical work, incoming and outgoing inspections, process checks, and adhering to PCX's...
- ...Job Description Job Description We are seeking a detail-oriented Quality Assurance Inspector to verify that incoming materials, in-process subassemblies, and finished manufactured components adhere to engineering drawings, customer specifications, and internal quality...
- ...contract specifications Conduct inspections in accordance with Quality Control Plan Conduct inspections to ensure adherence to... ...all shifts are covered appropriately in case of absence of an inspector. Qualifications Associates Degree in Technical...Contract workFor contractorsImmediate startAll shifts
$17 - $18 per hour
...Job Description Job Description Quality Control Inspector – Manufacturing Location: Raleigh, NC Schedule: Monday–Friday | 8:00 AM–5:00 PM Pay will be $17-18/hr We are seeking a detail-oriented Quality Control Inspector to join a growing door manufacturing...Monday to Friday- ...Manufacturers (OEMs), and industrial customers across North America. Headquartered in Dyersburg, Tenn., ERMCO delivers reliable, high-quality products that power homes, businesses, and communities across North America. With commitments to safety, operational excellence,...Relocation package
$120k - $150k
...our Rocklin, CA headquarters. PURPOSE OF THE POSITION The Senior Electrical Test Engineer protects SMA's customers and brand quality by personally testing, troubleshooting and investigating field failures on SMA's medium voltage solutions, including transformers,...Full timeTemporary workH1bWork at officeRemote workEarly shift- ...Job Description Job Description Description: The Fuel Quality Technician is responsible for completing fuel quality testing on site (gas stations, convenience stores, facilities that use gasoline or diesel for power) troubleshooting electro-mechanical problems,...Full timeLocal areaMonday to FridayAfternoon shift
- ...Conducts various quality control activities and assists with the application and monitoring of established inspection procedures and... ...management or mechanical engineering degree Certified Welding Inspector (CWI) qualification is desirable Hands-on or on-the-job training...Contract workFor contractorsFor subcontractorFlexible hours
- Title: Electrical Testing Technician Location: Garner, NC Job Summary: Sentinel Power Services is seeking an experienced Electrical Testing Technician to join our team. The successful candidate will perform acceptance and maintenance testing on low and medium...Permanent employmentFull timeWork at office
- ...Quality Control SpecialistConducts various quality control activities and assists with the application and monitoring of established... ...management or mechanical engineering degreeCertified Worlding Inspector (CWI) qualification is desirableHands-on or on-the-job training...Contract workFlexible hours
- A leading pharmaceutical manufacturing partner is hiring a QC Analyst in Raleigh, NC. This role involves performing analytical and wet chemistry testing, conducting routine inspections, and maintaining compliance with FDA regulations. Candidates should have a bachelor’...Shift work
- Accentuate Staffing is partnering with a leading pharmaceutical manufacturing company that is hiring for a QC Analyst. This is a contract-to-hire opportunity offering competitive pay and the opportunity to work in a regulated GMP laboratory environment. The ideal candidate...Contract workMonday to FridayShift workDay shiftAfternoon shift
- ...we continuously innovate. We dedicate 10% of our revenue to Research & Development such as to improve the diagnosis, prognosis and quality of life of patients. Achieve, Cooperate, Care and Innovate are the values that we share and practice on a daily basis. Working...Local areaImmediate startShift work
- ...services are more than project delivery, they're about safeguarding quality, safety, and trust at every step. As part of HDR's Field... ...connects employees around the world.HDR is looking for a Construction Inspector to perform construction engineering and inspection duties on...Contract work
$20 - $29 per hour
...NCDOT Transportation Construction Inspector (Levels 1 & 2) (Full-Time) Job Locations US-NC-Raleigh | US-NC-Wilmington | US... ...appropriately. Responsibilities include: Provide on-site inspection and quality assurance of roadway and structure construction for conformance...Hourly payFull timeContract workFor contractorsTraineeshipWork experience placementWork at office- ...requirements, including U.S. Citizenship, for access to classified information; ability to obtain & maintain an HSPD-12.ResponsibilitiesThe Quality Control Manager (QCM) is directly responsible for documenting, managing, implementing, and institutionalizing the various Quality...Contract work
- R&D Automation and Controls Engineer The R&D Automation and Controls Engineer plays a key role in the realization of automated equipment at TARGAN, Inc. This position is hands-on; requiring the Engineer to conceive, program, debug, and troubleshoot equipment with the...Contract workWork at officeFlexible hours
- Overview: Primarily responsible for various service and support functions around the clock across multiple client accounts. This role typically involves implementation, maintenance, and enhancement of control systems to ensure 24/7 facilities operations. A secondary...Full timeMonday to FridayShift workNight shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Quality Inspector. Be the first to apply!
- quality operator Raleigh, NC
- quality inspector Raleigh, NC
- quality control assistant Raleigh, NC
- quality assurance inspector Raleigh, NC
- quality assurance assistant Raleigh, NC
- quality control inspector Raleigh, NC
- supplier quality Raleigh, NC
- quality assurance quality control engineer Raleigh, NC
- rn quality Raleigh, NC
- quality Raleigh, NC




