Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Repair and Tool Technician

The Home Depot

Repair And Tool TechnicianPosition Purpose:Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.

Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Repair and Tool Technician in Leominster, MA vacancy
  • $20 - $24 per hour

     ...reassembly Troubleshoot minor machine issues and coordinate repairs when necessary Operate forklifts and other powered industrial...  ...aptitude and troubleshooting skills Experience using measuring tools such as micrometers, gauges, and calipers preferred Basic... 
    Suggested
    Hourly pay
    Full time
    Temporary work
    Local area
    Monday to Friday
    Shift work
    Day shift

    Adecco

    Fitchburg, MA
    2 days ago
  • $36 - $45 per hour

     ...and/or CNC vertical mills Program, load, and adjust CNC programs at the machine Machine high-mix, low-volume parts Select tooling, set offsets, and dial in setups Hold tight tolerances on complex components Perform in-process and first-article inspection... 
    Suggested
    Hourly pay
    Full time
    Shift work
    Day shift

    Micro Machine & Electronics, Inc.

    Leominster, MA
    a month ago
  •  ...candidate has experience operating CNC Swiss-type machines, can read and interpret blueprints, and is comfortable using precision measuring tools. Responsibilities Operate CNC Swiss machines safely and efficiently Read and interpret engineering drawings and blueprints... 
    Suggested
    Immediate start
    Night shift
    Day shift

    D&R Products Co., Inc

    Hudson, MA
    15 days ago
  • $27 - $32 per hour

     ...maintaining accuracy and quality standards • Read and interpret blueprints, GD&T, and job documentation • Inspect parts using measuring tools such as calipers, height gauges, and protractors • Make sound decisions related to part quality and acceptability • Maintain... 
    Suggested
    Hourly pay
    Temporary work
    Local area
    Shift work
    Afternoon shift

    Adecco

    Lunenburg, MA
    2 days ago
  • $19.55 - $32 per hour

    Adecco Staffing is partnering with a reputable manufacturing facility in Peterborough, NH to hire CNC Machine Operators! The position offers competitive pay rates and the opportunity to join a growing company. ***This is a DIRECT HIRE opportunity*** Pay Rate: $19....
    Suggested
    Hourly pay
    Temporary work
    Local area
    Relocation package

    Adecco

    Fitchburg, MA
    2 days ago
  • $18 - $26 per hour

    Adecco Staffing is working with a company in Ayer, MA to bring on a Machinist! This is a full time position. Location: Acton, MA Pay Range: $18–$26 per hour (Based on experience) Shift: 1st shift Job Summary: We are currently seeking a CNC Operator...
    Hourly pay
    Full time
    Temporary work
    Local area
    Shift work
    Day shift

    Adecco

    Leominster, MA
    2 days ago
  • $18 per hour

     ...machining tasks including milling and finishing Read and follow production paperwork and work instructions Make minor adjustments to tooling and offsets as needed Inspect parts using measuring tools to ensure quality standards Maintain machines including cleaning,... 
    Hourly pay
    Full time
    Temporary work
    Local area
    Shift work
    Night shift
    Day shift
    Afternoon shift

    Adecco

    Lunenburg, MA
    2 days ago
  •  ...review and organize production activities.  • Collaborates with Tool Room, Quality, Maintenance and Engineering teams to identify and...  ...process conditions; logging changes and drafting detailed mold repair work information form sheets • Ensures safety, cleanliness,... 
    Hourly pay
    Shift work
    Afternoon shift

    Clayens US LLC

    Fitchburg, MA
    11 hours ago
  • $30 - $35 per hour

     ...contributions and performance-based bonus distributions. What you'll be doing Read and interpret blueprints, technical drawings and tool design documentation. Fabricate, modify and assemble tooling and components to precise specifications. Operate Hurco CNC... 
    Hourly pay
    Full time
    Monday to Friday
    Shift work

    Randolph & Baldwin Inc

    Ayer, MA
    23 days ago
  • $17 - $20 per hour

    Job Description Job Description   Machine (Saw) Operator is a full-time manufacturing plant position. Initially the new hire will be trained to operate several different types of foam cutting saws, with the ability to move into a other roles quickly after demonstrating...
    Full time

    FOAMTECH LLC

    Fitchburg, MA
    a month ago
  • $19.28 per hour

    Adecco Staffing is working with a growing food manufacturing company in Greenville, NH to hire Machine Operators for 1st Shift. This is a full-time opportunity offering a 4-day work week, competitive pay, and overtime opportunities. If you enjoy hands-on work, working...
    Hourly pay
    Full time
    Temporary work
    Local area
    Shift work
    Weekend work
    Day shift
    3 days per week

    Adecco

    Fitchburg, MA
    16 days ago
  •  ...specified tolerances following work instructions and in accordance with machine programs and engineering drawings. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear.  Ensure product quality is achieved by working to operator... 
    Contract work
    Apprenticeship

    TECOMET

    Littleton, MA
    11 hours ago
  •  ...-established and reputable fire protection and life safety systems contractor who is actively seeking a dedicated Fire Sprinkler Technician to join their expanding team! This company values employee development and fosters a supportive, safety-first work culture.... 
    For contractors
    Local area

    gpac

    Leominster, MA
    5 days ago
  •  ...including progressive machining of a variety of parts and different metals where very close tolerances must be maintained. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear. Ensure product quality is achieved by working to operator... 
    Contract work
    Apprenticeship
    Night shift
    Afternoon shift

    TECOMET

    Littleton, MA
    11 hours ago
  • $35 - $50 per hour

     ...electronic files Set up and run jobs from start to finish with minimal assistance Use Mastercam for programming Determine tooling, fixturing, speeds, feeds and machining operations Create and document setup/operating procedures Support ProtoTRAK machining... 
    Hourly pay
    Permanent employment
    Full time
    Temporary work
    Local area
    Monday to Friday

    Adecco

    Devens, MA
    3 days ago
  •  ...assignment and log out upon completion including quantity completed. Verify that all company and personal inspection equipment and tools being used are in calibration. Responsible for keeping the machine and the immediate area clean. Verify sufficient stock... 
    Hourly pay
    Permanent employment
    Full time
    Immediate start
    Flexible hours
    Shift work
    Weekend work
    Afternoon shift

    Vitesse Systems

    Clinton, MA
    3 days ago
  • $20 - $30 per hour

     ...Citizen Swiss CNC machines • Ability to work on difficult and complex parts with minimal supervision • Performing machine setups, tool changes, and offsets • Monitoring production runs to ensure quality and efficiency • Inspecting parts using precision measuring... 
    Hourly pay
    Temporary work
    Local area
    Monday to Friday
    Shift work
    Day shift

    Adecco

    Littleton, MA
    2 days ago
  •  ...Machinist loads parts in the machine, cycles machine, and detects malfunctions in machine operations, such as worn or damaged cutting tools. The position communicates with co‑workers regarding production runs, and maintains a safe, organized, and clean work environment.... 
    Hourly pay
    Full time
    Monday to Friday

    Page Mechanical Group Inc

    Shirley, MA
    1 day ago
  • $60k

     ...000/- Annually plus benefits MUST HAVE At least 3-5 years of CNC machine setup experience required. Proficiency in using inspection tools such as calipers, micrometers, and gauges required. Ability to lift and carry objects up to 50 pounds required. Ability to read and... 

    Enterprise EQ

    Hudson, MA
    1 day ago
  •  ...and work instructions Machine parts to required tolerances and quality standards Perform part inspections using precision measuring tools (calipers, micrometers, gauges, indicators) Make tooling offsets and basic program adjustments as required Maintain quality standards... 
    Permanent employment

    Borg Design

    Hudson, MA
    3 days ago
  •  ...CRS, and 304 SSTSet-ups and break-downsWork from written procedures, blueprints, and verbal instructions under minimal supervisionSet tool registers, offsets, compensation, and conditional switchesCalculate dimensions and tolerances using basic mathematics and... 
    Temporary work
    Local area
    Shift work
    Afternoon shift

    NESCO Inc

    Devens, MA
    5 days ago
  •  ...complex CNC equipment to produce high-precision medical and aerospace components. You’ll interpret blueprints and CAD models, select tooling and fixtures, and perform in‑process inspections using precision measuring instruments to ensure tight tolerances and regulatory... 

    TECOMET

    Littleton, MA
    2 days ago
  • $16 - $19.5 per hour

     ...Tire TechnicianA Tire Technician is responsible for the dismounting, mounting and balancing of all tires sold. The Tire Technician will...  ...Job Qualifications:Prior knowledge of tire related equipment and tools a plusValid Drivers LicenseEducation Requirements:High School diploma... 
    Hourly pay
    Immediate start

    Town Fair Tire

    Fitchburg, MA
    1 day ago
  • $500 per month

     ...role loads parts into the machine, cycles the machine, and detects malfunctions in machine operations, such as worn or damaged cutting tools. Expertise in setting up machines, selecting appropriate tooling, and optimizing machining processes plays a vital role in success.... 
    Hourly pay
    Full time
    Relocation package
    Monday to Friday

    Producto Corp

    Shirley, MA
    3 days ago
  •  ...orthopedic, medical device, and aerospace components. In this role, you will set up and operate CNC equipment, interpret blueprints, load tools and fixtures, and monitor machining operations to meet tight tolerances. You will inspect parts using precision measuring tools,... 

    TECOMET

    Littleton, MA
    2 days ago
  •  ...ensure accurate machining processes. Perform routine maintenance on machines and troubleshoot any operational issues. Utilize hand tools and basic math skills for measuring, cutting, and assembling components. Collaborate with engineering teams to improve tooling... 

    Greenlight Professional Services

    Devens, MA
    3 days ago
  • $16.35 - $29.42 per hour

     ...CNC Operator to join our machining team. This role is ideal for individuals looking to start a career in precision manufacturing and tooling. The CNC Operator will assist in operating and maintaining CNC equipment while learning to produce high-quality components used in... 
    Hourly pay
    Internship
    Work at office
    Local area

    Nypromold

    Clinton, MA
    3 days ago
  •  ...meet design specifications Adjust machine cutting paths or settings to optimize production while maintaining quality Consider tools required to cut particular materials and program machines accordingly Troubleshoot and resolve problems with machines as they arise... 
    Flexible hours

    Accumet Engineering Corp

    Devens, MA
    1 day ago
  • $16 - $19.5 per hour

     ...Job Description A Tire Technician is responsible for the dismounting, mounting and balancing of all tires sold. The Tire Technician...  ...: Prior knowledge of tire related equipment and tools a plus Valid Drivers License Education Requirements:... 
    Hourly pay
    Immediate start

    Town Fair Tire

    Leominster, MA
    2 days ago
  • Accumet Engineering Inc, is an industry-leading advanced processing manufacturer for new and legacy materials fabrication, precision laser services, and critical component assembly. We are looking for an experienced Laser CNC Machine operator to join our team in our Devens...

    Accumet Engineering Corp

    Harvard, MA
    3 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!