Machinist

Machinist

As the largest private-sector power producer in the world and the nation's largest producer of clean and reliable energy, Constellation is focused on our purpose: lighting the way to a brilliant tomorrow for all. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Now integrated with Calpine, our portfolio includes 55 gigawatts of capacity from nuclear, natural gas, geothermal, hydro, wind and solar facilities, with the generating capacity to power the equivalent of 27 million homes. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things. Join us in meeting the country's energy needs today and tomorrow.

Constellation offers an extensive selection of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and a wide-range of benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, eligible employees are offered a bonus program, 401(k) with company match, employee stock purchase program; comprehensive medical, dental and vision benefits, including robust wellbeing programs; disability and life insurance benefits; paid time off for vacation, holidays, and sick days; and much more.

Pay: $31.98/Hr.-$51.73/Hr. (Based on experience)

The position will be within the Shops Department and is responsible for performing general mechanical maintenance on power plant equipment. The Shop team supports a culture of continuous improvement by participating in training, reinforcing standards, reporting, and mitigating unsafe or undesirable conditions, and utilizing the corrective action program. This position may regularly require 20% travel. Position Scope: Position reports to CGS Maintenance Foreman The incumbent in this position must be able to communicate across all levels of the organization. Knowledge of plant equipment functions including safety rules and rigging, construction and maintenance practices. Demonstrated ability to analyze complex mechanical problems and make repairs. Safety Consciousness, Contributing to Team Success, Technical/Professional Knowledge, Work Standards and Communication.

Primary Duties and Responsibilities

• Perform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, bearings, pipe systems, valves and limit torque operators. (disassembly, part repair or replacement, assembly) using sound technical decisions regarding maintenance on complex mechanical equipment
• Adheres to the conduct of maintenance and established maintenance standards and practices.
• Perform assigned tasks in a safe and efficient manner at the direction of Maintenance Management.
• Demonstrates strong maintenance skill on various pumps, valves, and balance of plan (BOP) equipment in a safe and reliable manor using the correct tools, equipment such as rigging, fork trucks and cranes
• Execute work package when assigned.
• Interpret and understand power plant prints.
• Ability to work on cross-functional teams on major projects.
• Provide technical support to plant operations, maintenance staff and engineering to the level of training received.
• Perform verification checks on maintenance items covered in maintenance technician training.

*** This role can be filled at Associate, Mid-level or Senior level. Please see minimum qualifications list below for each level** *

Minimum Qualifications Level I

• Associates Degree in Power Plant Technology, Engineering Technology, or Electronics OR
• HS Diploma with minimum of 12 months of trade or technical experience in Power Plant Technology or relevant field experienceOR
• Relevant Vocational Technical High School diploma with 6 months of Shop Experience at Fort Smallwood
• Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
• Valid driver's license and access to an insured vehicle
• Ability to lift a minimum of 50 pounds.
• Ability to work in a power plant environment that includes climbing and walking long distances.
• Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
• Works at high elevations on ladders and scaffolds.
• Works shift work or weekends as required.
• Perform tasks inside radiological controlled areas.
• Maintains nuclear qualifications IAW CGS Specific training program.
• Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
• Ability to obtain unescorted nuclear plant access
• Basic computer skills
• Good oral and written communication skills

Minimum Qualifications Level II

• Associates Degree in Power Plant Technology, Engineering Technology, or Electronics with minimum of 18 months of trade or technical training in Power Plant Technology
• Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
• Valid driver's license and access to an insured vehicle
• Ability to lift a minimum of 50 pounds.
• Ability to work in a power plant environment that includes climbing and walking long distances.
• Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
• Works at high elevations on ladders and scaffolds.
• Works shift work or weekends as required.
• Perform tasks inside radiological controlled areas.
• Maintains nuclear qualifications IAW CGS Specific training program.
• Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
• Ability to obtain unescorted nuclear plant access
• Basic computer skills
• Good oral and written communication skills

Minimum Qualifications Level III

• Associates Degree in Power Plant Technology, Engineering Technology, or Electronics with minimum of 3 years of trade or technical training in Power Plant Technology OR
• 5 years' experience in Maintenance Tech II or equivalent years of experience with trade or technical training in Power Plant Technology or relevant field experience
• Successfully complete the training requirements and time in job requirements for the position including previously passing the MASS test
• Valid driver's license and access to an insured vehicle
• Ability to lift a minimum of 50 pounds.
• Ability to work in a power plant environment that includes climbing and walking long distances.
• Exposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.
• Works at high elevations on ladders and scaffolds.
• Works shift work or weekends as required.
• Perform tasks inside radiological controlled areas.
• Maintains nuclear qualifications IAW CGS Specific training program.
• Maintain Radiation Protection Qualification and training, including respirator qualifications as needed
• Ability to obtain unescorted nuclear plant access
• Basic computer skills
• Good oral and written communication skills

This position may require 20% travel within company nuclear and Non-nuclear plant fleet.

Preferred Qualifications

Manual Machining with high degree of accuracy

Set up and perform maintenance machining operations with a variety of materials using equipment such as:

• Bridgeport milling machines.
• Engine lathes – 3 and 4 jaw chucks
• Surface grinders
• Vertical boring mills
• Vertical/Horizontal band saws,

CNC Machining with high degree of accuracy

Machine set up, operate and troubleshoot machining operations with a variety of materials using equipment such as:

• CNC Vertical Milling Centers – HAAS / Fanuc controls
• CNC Lathes – Fanuc controls
• CAD/CAM Programming – GibbsCAM
• CAD experience: AutoDesk / Inventor
• CAM programming experience: GibbsCAM
• Experience in CNC maintenance machining environment
• Mechanical background