WELDER I
SPC Mechanical Corporation
Welder I (Combo) Stick & TIG
The Welder I (Combo) Stick & TIG is responsible for performing entry-level welding tasks using Stick and TIG techniques to fabricate, assemble, and repair metal components. This role requires the ability to interpret engineering drawings, operate welding equipment safely, and ensure welds meet quality standards. The position supports production and maintenance operations under general supervision.
Responsibilities:
- Lays out, positions, and secures parts and assemblies according to specifications, using straightedge, combination square, caliper, and ruler.
- Tack-welds or welds components and assemblies.
- Cuts workpieces, using powered saws, hand shears, or a chipping knife.
- Melts lead bar, wire, or scrap to add lead to the joint or to extrude melted scrap into a reusable form.
- Observes tests on welded surfaces to evaluate weld quality and conformance to specifications.
- Inspect grooves, angles, or gap allowances, using a micrometer, caliper, and precision measuring instruments.
- Removes rough spots from workpiece, using portable grinder, hand file, or scraper.
- Welds components in flat, vertical, or overhead positions.
- Heats, forms, and dresses metal parts, using hand tools, torch, or arc welding equipment.
- Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc.
- Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations.
- Determines required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
Qualifications:
- Combo Welder (stick and Tig)
- Reliable attendance and punctuality
- Willingness to learn.
- Positive attitude and keeps a good morale on-site
Work Environment:
Describe the work environment and physical demands of the job, if applicable.
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to moving mechanical parts and high, precarious places.
The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions.
While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance, talk or hear. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
SPC Mechanical Corporation- Job Description Job Description Must be 6G certified in Stick/Tig pipe welding Company Description We consider applicants for all positions without regard for race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, or ...Suggested
- Job Description Job Description A local steel fabrication company is seeking an experienced Steel Fabricator to join our team full-time. This position is specifically for individuals with proven experience fabricating commercial steel projects , including: ...SuggestedFull timeLocal areaImmediate start
- ...With the a positive attitude, you will be able to learn and grow your craft. Applicants new to the industry are encouraged to apply. Welders that have been in the workforce and are looking for a new start or chance to work their way into a leadership position are also...SuggestedLocal areaShift work
$43 per hour
...Job Description Job Description Pipe Welders needed for various industrial projects near the New Irving Park, NC area. Duties will include welding pipe to install boilers, chillers, cooling towers, and process pipe. You will be stick welding 2" schedule 120 carbon...SuggestedDaily paidPermanent employmentTemporary workFor contractorsWork experience placementImmediate start$30 - $47 per hour
...Pipe Welder *THIS POSITION IS LOCATED IN GEORGETOWN, SC* Pay: $30-47/hr based off experience Per Diem: $150 per day Shift: Mon-Fri (48 hours) Job Description The Pipe Welder will perform high-quality pipe welds and repairs in an industrial manufacturing...SuggestedWeekly payDaily paidContract workTemporary workWorldwideShift work- ...Job Description Job Description Position Overview: Digitrol is seeking a skilled and experienced Pipefitter/Welder to join our team. The ideal candidate will be responsible for installing, assembling, fabricating, maintaining, and repairing piping systems, supports...Apprenticeship
- This position is responsible for the layout, fit-up, fabrication, and welding of stainless-steel sanitary tubing and hygienic process piping systems. Robinson Construction is a Design-Build General Contractor specializing in the completion of process-intense manufacturing...Contract workFor contractors
$25 - $32 per hour
...Aerotek is hiring for welders All shifts available - this is inside a fab shop Weld test will occur - 1G Mig Pay: $25-$32/hr Job Responsibilities Set pump skids according to equipment drawings and manufacturer specifications. Align skid-mounted...Weekly payContract workTemporary workAll shifts- ...Basic Scope/Purpose A Combination Pipe Welder will weld, fabricate and assist pipe fitters in installation of various types of industrial pipe into the projects piping systems. Essential Functions/Duties Selects equipment, plans layouts, assembly, and welding, applying...For contractorsWork at office
- ...A leading construction firm in North Carolina is seeking an experienced Combination Pipe Welder. The role involves welding, fabricating, and assisting in the installation of industrial pipes. Candidates must have over 4 years of experience and competencies in Stick and...
$25 - $32 per hour
...Aerotek is Hiring for WeldersAll shifts available - this is inside a fab shop.Welder test will occur - 1G Mig.Job ResponsibilitiesSet pump skids according to equipment drawings and manufacturer specifications.Align skid-mounted pumps to various piping connections.Install...Contract workTemporary workShift work- Industrial Boiler MechanicC&C Boiler Sales & Service, Inc. is currently seeking a skilled and safety-minded Industrial Boiler Mechanic with experience in boiler system installation, welding, refractory repair, and industrial mechanical work. The ideal candidate will work...Night shift
$24 - $30 per hour
...Post & Panel makes custom aluminum sign products for wholesale clients in the sign industry. We're hiring a full-time Sign Fabricator/Welder at our shop in Pineville, NC, to fabricate architectural signage and decorative traffic control components. This position is open...Hourly payFull timeImmediate start$20 - $25 per hour
...MIG WelderMIG WELDER – Charlotte, NC – (North Charlotte) Schedule: M – F | Shift: 1pm – 9pm | Pay : $20 – $25, depending on experienceAbout the Role Employbridge is seeking an experienced MIG/Robotic Welders to support high-volume metal fabrication operations. This position...Shift work$22 - $24 per hour
...MIG WelderPrideStaff is seeking a skilled and consistent MIG Welder for a metal fabrication company in Matthews, NC. The qualified candidates must have three or more years of experience MIG Welding. Knowledge and experience with structural steel and I-beams is necessary...ApprenticeshipMonday to FridayWeekend work$32 per hour
...Now Hiring: Skilled TIG Welder FabricatorsWe're looking for experienced TIG Welder Fabricators to join our growing manufacturing team! If you have strong stainless steel and aluminum welding skills and a passion for precision fabrication, we want to hear from you.Important...Immediate start$24 - $30 per hour
Ornamental Post & Panel is hiring a full-time Sign Fabricator/Welder in Pineville, NC to fabricate architectural signage and decorative traffic control components. The job is on-site with an hourly wage of $24-$30 based on experience. Immediate hire, apply by November...Hourly payFull timeImmediate start- ...insurance ~401K ~ Excellent training ~ Great family work environment ~ Paid vacation and holiday Job Summary The Welder/Fitter I position is a vital member of the Operations Team contributing to our safety culture, providing high productivity,...
- ...Job Description Job Description Title: Welder 4 Location: Charlotte, North Carolina, 28273 Duration: 12 months Shift: 4X10 Nights, Monday - Thursday Description: ~ Operating with two years experience is responsible for fabricating and welding filtration...Shift workNight shift
- ...Welder I (Combo) – Stick & TIGThe Welder I (Combo) – Stick & TIG is responsible for performing entry-level welding tasks using Stick and TIG techniques to fabricate, assemble, and repair metal components. This role requires the ability to interpret engineering drawings...
$22 - $28 per hour
...depending on experienceSchedule: Monday–Friday, 8:00 AM–5:00 PMJob Type: Full-TimePosition Summary: We are seeking an experienced MIG Welder to join our team in Matthews. The ideal candidate will have hands-on MIG welding experience, a current welding certification, and...Monday to Friday- ...Job Description Combo Welder - Nuclear EnergySolutions is hiring nuclear welders for the fall outage season! A Nuclear Combo Welder is a highly skilled professional responsible for the safe application of welding techniques to join, fabricate, and repair metal...Shift work
- A Snapshot of Your Day This is a 3x12 night shift position focused on the repair and restoration of combustion components for the power generation industry. In this role, you will perform manual GTAW welding on superalloy materials, including Inconel and Hastelloy...Local areaVisa sponsorshipNight shift
- ...Benefits/Perks Flexible Schedule Competitive Pay Career Advancement Job Summary We are seeking a skilled Welder to join our team. In this position, you will interpret blueprints and drawings to accurately weld structural components and parts. This is an integral part...Flexible hours
$24 - $48 per hour
...we do. For more information, visit corporate.carrier.com or follow Carrier on social media at @Carrier. About this Role The Welder IV is a senior-level position requiring expert knowledge of departmental operations and proven welding and process proficiency....Hourly payTemporary workWork at officeLocal areaDay shift$25 - $32 per hour
...Aerotek is hiring for welders All shifts available - this is inside a fab shop Weld test will occur - 1G Mig Job Responsibilities Set pump skids according to equipment drawings and manufacturer specifications. Align skid-mounted pumps to various piping connections...Weekly payContract workTemporary workAll shifts- Nederman Manufacturing and Logistics LLC Apply before: 2026-11-22 Are You? Ready to use your skills to drive and lead the team to success? Hungry to always find a better way of doing things? Thrilled about working for a global industry leader in its mission to shape the...
$57k - $68.68k
...Dusk Sage LLC, a Charlotte, NC-based company in manufacturing and construction, seeks a Welder for full-time employment. This role offers competitive pay and the opportunity to work on diverse projects in a collaborative environment. As a Welder, you will weld various...Full time- ...creating extraordinary flow control solutions that strengthen today's world while building tomorrow. Role Summary: As a Welder at Flowserve, you will support the repair and fabrication of nuclear pump components used in critical industrial applications. In...Temporary workWork at officeFlexible hoursWeekend work
$22 per hour
...innovation-always focused on meeting the evolving needs of the commercial construction industry. We are currently looking for a Welder on 1st shift to join our team! This individual will be based in Charlotte, NC and will be responsible for basic welding to produce...For contractorsLocal areaFlexible hoursDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to WELDER I. Be the first to apply!


