Lead NDT Inspector
$90k - $110kIMIA, LLC
Job Description
Job Description
ARMADA INC.
POSITION DESCRIPTION
TITLE: Lead NDT Inspector
REPORTS TO: NDT Examiner, LIII
FLSA STATUS: Exempt
PAY RANGE: $90,000.00-$110,000.00 Anually DOE
FT / PT STATUS: Full time
LOCATION:
SUMMARY
Lead NDT Inspector will direct and provide supervisory oversight of junior level II NDT inspectors, aiding them with technical guidance and on-the-job training as necessary. The lead NDT inspector will also perform VT, UT, MT and PT inspections on surface ship and submarine structure/ piping. Required to perform miscellaneous tasks, as assigned by his or her NDT Examiner.
ESSENTIAL DUTIES & RESPONSIBILITIES
- Provide advanced training to both junior and journeyman NDT inspectors for NDT inspections as well as other typical duties such as Test and Inspection Plan management
- Junior NDT inspectors in the region will report to Lead NDT
- Act as deck plate subject matter expert on NDT for various projects
- Review technical work instructions for accuracy and completeness prior to assigning NDT tasks
- Assist in resolving quality issues in region
- Identify areas of improvement for NDT and Quality Assurance procedures and as they ari Review NDT inspectors’ Objective Quality Evidence prior to submittal
- Ensure attention to detail is paramount amongst all inspectors
- Perform periodic surveillances on trade workers (welders / fitters) as well as NDT inspectors to establish trends and combat non-conformance
- Perform most complicated VT MT PT, and UT processes with an emphasis on training junior inspectors
- Perform basic VT, MT, PT and UT inspections as workload demands
- Act as liaison between Test Examiners and projects as needed
- Ensure projects have NDT resources needed
- Ensure NDT equipment on job sites is in good working order and calibrated as required
- Perform other related duties as assigned
SUPERVISORY RESPONSIBILITY
- Direction and oversight of fellow NDT Inspectors
- Must be able to deliver simple to complex instructions to inspectors in a manner that they can follow accurately.
KNOWLEDGE, SKILLS, ABILITIES & ATTRIBUTES
- Have knowledge of welding joint design and joint fit up requirements
- Ability to follow instructions given both verbally and in written form
- Willingness to learn and work to the best of his/her abilities and have a dependable work ethic
- Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals
- Familiarity with the metric system
EDUCATION AND EXPERIENCE
- High school graduate, or GED
- Qualified NDT Level II inspector IAW NAVSEA requirements in Tech pub 271
- Experience with SMAW, GTAW and GMAW welding highly preferred
- 5+ years of NAVSEA NDT certification in the following methods: Visual testing, liquid penetrant testing, magnetic particle testing, ultrasonic thickness testing and ultrasonic shearwave testing
- Previous leadership or management experience preferred but not required.
WORKING CONDITIONS / PHYSICAL REQUIREMENTS
- Regularly required to walk; frequently required to stand, stoop, kneel, crouch, climb, balance, or crawl at various heights and in confined spaces; occasionally required to sit; required to reach with hands and arms, use hands to feel, grip, or handle; regularly required to safely lift and/or move up to 50 pounds; required use of vision to see up close, distance, and peripherally, as well as depth perception and ability to adjust focus in low light conditions. May be required to wear a respirator to safely perform assigned tasks.
- Ability to successfully pass near vision acuity and color discrimination examinations, with or without the use of corrective lenses (glasses or contact lenses), is required.
- Must be able to deliver simple to complex instructions to inspectors in a manner that they can follow accurately.
- Willing to work 40+ hours a week
REASONABLE ACCOMMODATIONS
- Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions
- ...associating metals, alloys and filler metal by color code and standard markings. You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests. You will be using test methods for determining metals or alloys. You will be inspecting...Ndt
$60 - $75 per hour
...Qualified Field Inspectors For Insurance Loss Control Needed Immediate placement available. Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity. The dominant standard flat fee range is $60 - $75, with...SuggestedFor contractorsImmediate start- ...currently servicing 3,000 properties per day, Seek Now is the leading data capture and inspection services firm serving 240+ customers... ...home and commercial property inspections. Our 1099 Field Inspectors are the frontline experts who assist and collect data for our...SuggestedWeekly payFor contractorsFor subcontractorWork at officeFlexible hours
$1,500 per month
...growth? Prefer working outdoors instead of being stuck inside? This could be the perfect fit for you. Field Audit & Inventory Inspector (1099 Contractor) This position requires travel between locations. Quiktrak is seeking 1099 Audit and Inventory Inspectors to...SuggestedExtra incomeContract workPart timeFor contractorsLocal areaMonday to FridayFlexible hours$26 - $48 per hour
...Role Overview TSA is hiring Security Inspectors to evaluate airport security systems in Bremerton and ensure compliance with federal regulations. Inspectors conduct audits and assessments to maintain safety standards. Position Details Openings : Bremerton and...Suggested- A leading property inspection services firm is seeking capable 1099 independent subcontractors to provide thorough home and commercial... ...excellent earning potential, weekly payments, and support for inspectors with state-of-the-art tools. A professional appearance and...Weekly payFor subcontractorFlexible hours
$35 - $45 per hour
...transfer, leave of absence, compensation, and training. Description ARMADA INC. POSITION DESCRIPTION TITLE: Quality Control Inspector REPORTS TO: Quality Control Supervisor FLSA STATUS: Non-Exempt PAY RANGE: $35.00-$45.00 per hour DOE FT / PT STATUS:...Hourly payDaily paidFull timeContract workFor contractorsWork at officeLocal area$25 - $50 per hour
...Role Overview TSA is accepting applications for Lead and Supervisory Transportation Security Officers at airports in Tracyton. These roles are ideal for individuals looking to step into leadership positions within airport security operations. TSA provides training...Shift workNight shiftWeekend work$25 per hour
Job Title Salary: $25/hour for loading and unloading HHG hauling: $0.60 per mile Freight hauling: $0.50 per mile (all drive miles); retention pay at hourly rate Sitting days: $200 per day while waiting for a load (reset days unpaid unless driving miles apply...Hourly payFull timeRelocation$60 - $75 per hour
...Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available. Pay: We pay a competitive standard flat fee per case -based on customer as well as, inspection type and complexity. The dominant standard flat fee range...Contract workFor contractorsImmediate start- Job Title Job Description Help You will ensure tools and materials are available to complete assigned projects. You will plan and arrange for proper and safe work operations for assignments. You will analyze trade requirements through the use of audits, ...
- ...minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$27.51 per hour
...Facility Coordinator/Clerk Lead Bowhead seeks a Facility Lead to oversee maintaining efficient operations of up to forty-two (42) facilities operated or occupied by MCSFBN personnel. Manage and oversee daily facility management tasks and functions to maintain readiness...Hourly payContract workFor contractorsWork at officeLocal area- Electrical Distribution Panel Placement You will determine placement of electrical distribution panels and other equipment. You will install, maintain, troubleshoot, or repair electrical equipment, systems, generators, switchboards, or control equipment in a shipyard...
- Duties Help You will provide technical trade leadership to a small working group. You will ensure necessary materials are available, and tools and equipment are in good, safe operational condition to accomplish work. You will recommend specific task assignments...
- Job Duties You will conduct on the job training for nuclear and non-nuclear work. You will instruct pipefitter mechanics, workers, helpers and ship's force personnel in the skills of the trade. You will utilize knowledge of the latest work processes and procedures...
$19 - $22 per hour
Opens and closes the store in the absence of store management, including all required systems start-ups, required cash handling, and ensuring the floor and stock room are ready for the business day. Responsible for opening back door of store for deliveries. Completes...Hourly payWork experience placementSeasonal workLocal areaShift work- Driven work that makes a difference for pets and people. Hands-on leadership experience and career growth opportunities. A supportive, inclusive culture built on teamwork and authenticity. The chance to grow your leadership skills while having fun do Animal Care, Supervisor...
- ..., standards, plans and schedules. You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations. You will serve as an Expert Welder leading a group to ensure work assignments are completed....
- Job Duties You will apply a variety of methods, procedures, and techniques to layout, install, align, overhaul, repair, and maintain numerous types of marine machinery, equipment, and systems. You will utilize and apply standard formulas, shop mathematics, trade ...
- ...Job Title Expert Electrician Job Description You will serve as an expert electrician leading a group to ensure work assignments are completed. You will be responsible for the repair, overhaul, installation, modification, calibration, and test of electrical systems...Shift work
- ...Expert Pipefitter You will serve as an Expert Pipefitter leading a group to ensure work assignments are completed. You will install, modify, fabricate, and repair new and existing shipboard system piping and equipment including low and high pressure air, water, and...
- ...minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$23.97 per hour
...responsibility. About the Position The Retail Supervisor assists the management team in the daily operations of the store. Supervises and leads retail associates within the store location. This role works a rotational assignment supervising various retail categories. Ensures...Work at officeFlexible hours- ...join our team in our Bremerton office. The Business Development Representative is responsible for prospecting sales and qualifying leads for new and existing accounts. This person will act as a liaison between our marketing and sales teams. He/she will be naturally...Full timePart timeWork at officeFlexible hours
- Job Title Job Description Help You will assign, direct, and review the work of subordinates. You will plan, schedule, and coordinate work operations. You will inspect completed work for quality and work order requirements. You will coordinate work with...
- Duties You will plan work schedules of subordinates and establish priorities on the basis of general work schedules methods and instructions from higher levels of supervision. You will make recommendations concerning training requirements, skills, and qualifications...
- Job Duties You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills. You will utilize many...
- ...marine components from start to post-work review. You will pass instructions received from supervisors and provides overview of tasks to be performed to other workers. You will serve as an Expert Machinist leading a group to ensure work assignments are completed....
- Job Title The duties of this position include: Manufacturing, assembling, installing, removing, and repairing ventilation, furnishings, and items including but not limited to nonstructural bulkheads and overheads. Providing technical expertise on work instructions...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Lead NDT Inspector. Be the first to apply!



