MACHINIST LEADER
Department of the Navy Headquarters
Summary You will serve as a MACHINIST LEADER in the DEPARTMENT OF NAVY to include work sites of Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility . Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temp promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temp actions taken under this announcement may be made permanent without further competition. Temp actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some relocation costs experienced. A relocation incentive may be authorized. Applicants rated ineligible on this announcement need to reapply and update their application to be considered on future vacancies. Applicants selected and hired through this announcement need to reapply to be considered on future vacancies. During the application process you will have the ability to opt-in to make your resume available to hiring managers who have similar positions in the local commuting area. Depending on the hiring organization, position being filled, job requirements (e.g., security clearance, travel, drug testing, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a cert, your resume will be available to other hiring managers for 180-days from the date the announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
- You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills.
- You will utilize many types of precision instruments and equipment such as vernier calipers, squares, protractors, micrometers, vee blocks, parallel bars, dial indicators, comparators, different gauges for accurate dimensions and tolerances.
- You will plan and lay out work from blueprints, work sheets, and drawings that may have missing or incorrect information.
- You will use shop mathematics and handbook formulas in computing and verifying dimensions in the planning, laying out, and final dimensional checking processes.
- You will produce desired cuts and finishes on various metals and other materials such as aluminum, brass, bronze, high carbon and alloy steels, chrome, nickel, titanium, molybdenum, super alloys, nylon, rubber, plastics, teflon, etc.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This may be a bargaining unit position.
- You may be required to successfully complete a pre-appointment physical examination.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.
- You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.
- This position may require exposure to high noise levels.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.
Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temp promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temp actions taken under this announcement may be made permanent without further competition. Temp actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some relocation costs experienced. A relocation incentive may be authorized. Applicants rated ineligible on this announcement need to reapply and update their application to be considered on future vacancies. Applicants selected and hired through this announcement need to reapply to be considered on future vacancies. During the application process you will have the ability to opt-in to make your resume available to hiring managers who have similar positions in the local commuting area. Depending on the hiring organization, position being filled, job requirements (e.g., security clearance, travel, drug testing, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a cert, your resume will be available to other hiring managers for 180-days from the date the announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Vacancy posted 13 hours ago
Similar jobs that could be interesting for youBased on the MACHINIST LEADER in El Cajon, CA vacancy
- Job Duties You will set up and operate most types of conventional and computer numerical control machine tools such as lathes, vertical and horizontal boring mills; bench, milling machines; shapers; planers; grinders; thread cutters and drills. You will utilize many...Suggested
$36.85 - $43.01 per hour
...Hiring Agency: United States Fleet Forces Command Department: Department of the Navy You will serve as a MACHINIST LEADER in the MECHANICAL SHOP (CODE 931), PRODUCTION RESOURCES DEPARTMENT of PORTSMOUTH NAVAL SHIPYARD. Key Responsibilities You will set up and operate...Suggested- ...Machinist Leader You will serve as a MACHINIST LEADER in the DEPARTMENT OF NAVY to include work sites of Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants...Suggested
$38.07 - $41.42 per hour
Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance required Job Summary Installs, maintains, and repairs ship's main propulsion and auxiliary systems including, but not limited to Steam, Gas Turbine, Diesel propulsion,...SuggestedHourly payLocal areaFlexible hoursShift work$36 per hour
...Summary You will serve as a MACHINIST LEADER in the MECHANICAL SHOP (CODE 931) PRODUCTION RESOURCES DEPARTMENT of PORTSMOUTH NAVAL SHIPYARD. Duties You will set up and operate most types of conventional and computer numerical control machine tools such as...SuggestedFull timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationShift workNight shift- ...site. Eligibility for individual benefit plans may vary based on employment status. Job Summary We're looking for a Machinist to set up and operate a variety of manual and CNC machine tools to manufacture and repair precision aerospace components. In this...Permanent employmentLocal areaMonday to FridayFlexible hoursShift workDay shiftAfternoon shift
$25 - $35 per hour
...Machinist Now hiring for a Machinist Location: Santee, CA $25.00 $35.00 per hour Schedules: 6 AM 2:30 PM 2:30 PM 11 PM Not Everyone Gets Microns. You Do. Responsibilities: Set up, adjust, and operate manual and CNC machines such as mills, lathes, and grinders. Read and...Hourly payWeekly payTemporary workFor contractorsLocal areaImmediate startFlexible hoursShift work$34 - $40 per hour
...assembly, soldering, encapsulation, welding/machining, and electrical testing. As a team member of the San Diego Depot Factory, a Machinist is responsible for managing and executing detailed, machined parts. We utilize horizontal and vertical mills, lathes, and other...Contract workTemporary workWork experience placementWork at officeRemote workRelocation packageFlexible hoursShift workDay shift$26 - $33 per hour
...Machinist Mativ is a global leader in specialty materials headquartered in Alpharetta, Georgia. The Company offers a wide range of critical components and engineered solutions that connect, protect, and purify our world. We are looking to fill our 1st...Hourly payNight shiftDay shiftAfternoon shift$45 - $48 per hour
...the Highest Level at 5th Axis At 5th Axis , we're global leaders in precision machining, automated production, and turnkey... ...technology, we design, build, and deliver solutions that empower machinists and manufacturers worldwide. If you're an experienced CNC machinist...Hourly payApprenticeshipWorldwide$24.15 - $42.97 per hour
...Reimbursement ~ Sign-On Bonus * These benefits also apply to part-time employees About the Role: The CNC Machinist will set up and operate any machine tool to perform any operation within its capacity where special fixtures and holding devices are...Part timeCurrently hiringRelocation packageFlexible hoursShift workNight shiftAfternoon shift$25 - $40 per hour
...Job Description Job Description CNC Machinist – High Performance / Motorsports $25 – $40/hr (DOE) About Fortin Racing, Inc.... ...for off-road race cars in the early 1970s and has evolved into a leader in high-performance drivetrain and steering components—manufactured...- ...Manual Machinist Opportunity Do you want to work for an innovative company that's providing manufacturing solutions to some of the world's largest companies? Here's your chance! Discflo's patented pump products are used in almost every global industry; such as oil &...Apprenticeship
$30 - $40 per hour
Wedding Dress & Bridal Seamstress – Alterations – Santee, CASantee, California, United States$ 30.00 - 40.00 (US Dollar)About the job Wedding Dress & Bridal Seamstress – Alterations – Santee, CAJoin our network of independent alteration professionals specializing in bridal...For contractorsLocal areaAfternoon shift- Alterations SpecialistFrom Aisle to Algorithm and for All Life's Moments, at David's Bridal, we empower our customers and our employees to stay true to their dreams and find the one, whether that means the event or the wedding dress that matches a personal style—or the...Part time
- About the job Wedding Dress & Bridal Seamstress - Alterations - Santee, CA Join our network of independent alteration professionals specializing in bridal and wedding wear.What You'll Do• Alter wedding gowns, bridesmaid dresses, and mother-of-the-bride/groom dresses...For contractorsLocal areaWork from homeAfternoon shift
- ...Confident, strategic, and passionate about retail and home design, Store Leaders drive results through people and performance. In this role, you’ll lead a high-performing team dedicated to delivering exceptional customer experiences and driving profitability. You’ll ensure...Hourly payFull timeWork at officeFlexible hoursNight shift
$80k - $120k
Company: comma.ai, Inc. Location: San Diego, California Pay: $80,000–$120,000 per year Job type: Full-time Work environment: On-site Machines: Haas VF-2 • CNC lathe • 3D printers Focus: Prototype machining • CAM programming • Shop leadership ...Full timeVisa sponsorshipFlexible hours- ...Machinist Duties You will use various types of conventional and/or computer numerical control (CNC) machine tools and their attachments to perform machining operations in the repair and/or manufacture of parts from raw stock. You will determine work procedures, machine...
- Taylor's University Sdn Bhd in Malaysia invites applications for a Senior Lecturer in General Surgery within the School of Medicine. The role focuses on teaching, research, and curriculum development; advanced teaching materials, lectures, tutorials, and assessments are...
- ...Outside Machinist Journeyman Seeking an Outside Machinist Journeyman to help support operations. The Outside Machinist Journeyman is responsible for the overhaul, alignment, and adjustment of machinery equipment in place onboard ship; cut, shape, and drill various materials...
$51k - $69k
Job Title Metal Part Machining Job Description Metal Part Machining focuses on operating computer or mechanically controlled machines to produce and repair metal parts for manufacturing. Analyzes engineering specifications or blueprints to define the dimensions...Temporary workShift work$51k - $69k
...Machinist II At General Dynamics Ordnance and Tactical Systems, our employees are the heart of our company. We invite you to apply to join our team of employees who are dedicated to excellence that meet the needs of the warfighters and our customers around the world...Temporary workShift work$30 - $41 per hour
...Proven experience in lathe operation, preferably with Mori-Seki and Doosan machines Strong machining skills with a background as a machinist Familiarity with manual machining techniques is a plus Ability to read and interpret blueprints and technical drawings...- ...Machinist General Atomics Electromagnetic Systems (GA-EMS) designs and manufactures first-of-a-kind electromagnetic and electric power generation systems. GA-EMS' expanding portfolio of specialized products and integrated system solutions support critical fleet, space...Worldwide
$21 - $30 per hour
...Machinist San Diego Office - San Diego, CA 92121 Overview Salary Range $21.00 - $30.00 Hourly Position Type Full Time Job Shift Day Category Manufacturing Description The Machinist Technician plays a pivotal role on our manufacturing team, specializing in...Hourly payFull timeWork at officeShift work- ...work performed by equal or lower level personnel, such as fist part inspection. May provide guidance or training to lower level machinist. On occasions, help/train new machinist on machining principles and Company procedures. Responsible for observing all laws,...Hourly payFull timePart timeLocal areaWorldwideRelocation package
- ...fabricate and assemble components. Performs other duties as assigned or required. Launch Your Career with a Leader in Advanced Technology! General Atomics Machinist Invitational Hiring Event Friday December 11, 2026 San Diego, California (Torrey Pines) This is your...Immediate startRemote work
$26.25 - $30.25 per hour
...CNC Machinist This role operates and sets up 3-axis CNC mills in a high-volume production environment, focusing on safety, quality, and repeatable processes. You will run CNC Haas mills and Robo Drills with Fanuc controls, perform changeovers between jobs, and ensure each...Contract workTemporary workFlexible hoursDay shift- ...About the job Outside Machinist Navy Machinist Mates highly encouraged to apply. EPA certification highly preferred. Marine Hydraulics or Marine Refrigeration a plus. As an Outside Machinist at Talent Source, you will be responsible for performing mechanical...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to MACHINIST LEADER. Be the first to apply!
Related searches
- team leader mental health El Cajon, CA
- healthcare team leader El Cajon, CA
- IT team lead El Cajon, CA
- team coordinator El Cajon, CA
- team leader El Cajon, CA
- team lead El Cajon, CA
- school leader El Cajon, CA
- quality assurance team leader El Cajon, CA
- team lead data science El Cajon, CA
- helpdesk team lead El Cajon, CA



