Heavy Mobile Equipment Mechanic
Army Tank-Automotive and Armaments Command
Summary About the Position: The Anniston Army Depot is located in Anniston, Alabama in the foothills of the Appalachian Mountain chain halfway between Atlanta, GA and Birmingham, AL just off Interstate 20. The Depot is the largest employer in Calhoun County with approximately 4000 employees. Learn more about this agency Duties Help
- Rebuild major vehicle systems such as AVDS-1790 series and Detroit V6/V8 engines, XT-1410 Cross-Drive, CD-850 Series Cross-Drive, and XTG-411 transmissions, as well as fuel and electrical systems, restoring all components to full operating condition.
- Connect transmissions to engines, form power packs, and perform system tests.
- Repair external components of the power pack assembly by identifying faults and restoring affected parts to proper function.
- Build the power packs and check that they work correctly under the required conditions.
- Handle hazardous materials and waste by following established safety procedures to prevent spills, contamination, and unsafe conditions in the work area.
- Overhaul combat vehicle fuel/electrical assemblies, components, and subsystems such as regulators, starters, injectors, pumps, and heaters.
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- This position requires the completion of a pre-employment Physical Examination and an annual examination thereafter.
- This position has a requirement to lift up to 45 lbs. in the regular performance of duties.
- Current Department of Army Civilian Employees
- Interagency Career Transition Assistance Plan
- Land Management Workforce Flexibility Act
- Military Spouses, under Executive Order (E.O.) 13473
- Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
- Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
- Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
- Priority Placement Program, DoD Retained Grade Preference Eligible
- Veterans Employment Opportunity Act (VEOA) of 1998
- Ability To Do The Work Of The Position Without More Than Normal Supervision
- Ability to Interpret Instructions, Specification, etc. (includes blueprint reading)
- Ability To Use and Maintain Tools and Equipment
- Knowledge of Equipment Assembly, Installation, Repair, etc.
- Technical Practices (Theoretical, Precise, Artistic)
- Troubleshooting
- Use of Measuring Instruments
- Physical Effort: Work involves standing, bending, reaching, stretching, crouching and working in tiring and uncomfortable positions. Frequently lifts items weighing 15-25 pounds and occasionally in excess of 45 pounds.
- Working Conditions: Work is performed in shop that is moderately lighted, heated, and ventilated; is exposed to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts and sweepers in shop area. Since exposure to hazardous materials/waste is possible, wears protective clothing and equipment (e.g., rubber boots, coveralls, goggles, aprons, gloves, respirator, etc.) as situations warrant.
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
- Direct deposit of pay is required.
- This is a(n) Material Maintenance Management Career Program position aligned under the Logistics Career Management Directorate. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- Multiple positions may be filled from this announcement.
- Hourly wage includes applicable locality pay or Local Market Supplement.
- Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
- Recruitment and Relocation Incentives may be authorized according to agency policies.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the Heavy Mobile Equipment Mechanic in Anniston, AL vacancy
- ...position without more than normal supervision. Minimum Qualifications (Screen Out Element): Ability to do the work of an Heavy Mobile Equipment Mechanic without more than normal supervision which include conduct visual inspections of engines (AVDS-1790 series, 6V53/8V71...SuggestedHourly payPermanent employmentLocal areaRelocation package
- About The PositionThe Anniston Army Depot is located in Anniston, Alabama in the foothills of the Appalachian Mountain chain halfway between Atlanta, GA and Birmingham, AL just off Interstate 20. The Depot is the largest employer in Calhoun County with approximately 40...Suggested
- Duties Help Rebuild major vehicle systems such as AVDS-1790 series and Detroit V6/V8 engines, XT-1410 Cross-Drive, CD-850 Series Cross-Drive, and XTG-411 transmissions, as well as fuel and electrical systems, restoring all components to full operating condition. ...Suggested
- About The Position The Anniston Army Depot is located in Anniston, Alabama in the foothills of the Appalachian Mountain chain halfway between Atlanta, GA and Birmingham, AL just off Interstate 20. The Depot is the largest employer in Calhoun County with approximately...Suggested
$30.69 - $35.81 per hour
Hiring Agency: Army Tank-Automotive and Armament Command (TACOM) About the Position: The Anniston Army Depot is located in Anniston, Alabama in the foothills of the Appalachian Mountain chain halfway between Atlanta, GA and Birmingham, AL just off Interstate 20. The Depot...Suggested- ...Heavy Equipment Mechanic APAC Alabama, Inc., part of CRH's South Division, is a leading supplier of quality asphalt and Construction Services in the Southeastern U.S., with operations in Alabama. Working with government agencies, private contractors, counties and municipalities...For contractors
- ...TACOM (ANAD) Heavy Equipment Mechanic (Contingency) Belong, Connect, Grow, with KBR! The U.S. Army Tank-automotive and Armaments Command (TACOM) sustains the Army's mission to develop, acquire, field, and sustain ground combat, tactical, and support systems throughout...Contract workImmediate start
- ...Troubleshooting, repairing, modifying, and maintaining a variety of construction, industrial, combat, tactical, and power generation equipment. Repairing and replacing components of the cooling, braking, exhaust, power train, or hydraulic systems on combat and tactical,...
- ...construction, industrial, combat, tactical and power generation equipment. Repair and replace components of the cooling, braking,... ...Qualifications (Screen Out Element): Ability to do the work of an Heavy Mobile Equipment Repairer without more than normal supervision. To...Permanent employmentWork experience placementLocal areaRelocation package
- Military Technician Position This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. About the Position: This is a Military...
- ...DescriptionHelpTroubleshoot, repair, modify and maintain a variety of construction, industrial, combat, tactical and power generation equipment.Repair and replace components of the cooling, braking, exhaust, power train, or hydraulic systems on combat and tactical,...
$30.54 per hour
...AL Tyler Union is growing, and we're looking for skilled Mechanical Millwrights to join our team! If you want competitive pay, strong... ...between moving and stationary parts. Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers,...Hourly payFor contractorsLocal areaAfternoon shift$20 per hour
...Maintenance MillwrightResponsible for installing, maintaining, troubleshooting, and repairing industrial machinery and mechanical equipment to ensure safe, efficient, and reliable operation.Manufacturing textile plant: manufactures high-quality polypropylene, nylon, and...Temporary workMonday to ThursdayShift work$20 per hour
.... Pay: $20.00 per hour Job Summary: The purpose of this position is to perform preventative maintenance, install machinery and equipment in industrial establishment. Key Responsibilities: Start up boiler, blow down once daily, and check press and water levels...Hourly payFull time- Job Title: Information Technology Professional (IT/CTN/IS) Category / Component: Enlisted Both Overview Information Systems Technicians, Cryptologic Technician Networks, and Intelligence Specialists keep the Fleet connected, informed, and secure by operating and...ApprenticeshipWorldwideShift work
$25 - $33 per hour
...City, IL is looking for a Diesel Vehicle Mechanic to join their safety conscious team!... ...safe manner at all times; Move company equipment safely on yard as needed; Assist drivers... ...environment 1+ years prior experience working on heavy duty-trucks and equipment. 1+ years DOT...Hourly payFull timeTemporary workRelocation package- ...CertificationOR 5+ years verifiable field experience in I.T./TelecomRequired Equipment & Qualifications Reliable personal vehicle (Public... ...testers, crimpers).Laptop with Ethernet portSmartphone with mobile hotspotAbility to accept job assignments based on your availability...Hourly payFor contractorsImmediate startWork from homeFlexible hours
- ...manufacturing environments. Install, configure, repair, and maintain Windows‑based workstations, printers, scanners, and associated IT equipment. Support specialized production‑floor technologies, including barcode scanning devices, label printers, and connected...Work at office
$28 per hour
...Scope: Structural steel and machinery erection. Bolting, rigging, lifting, leveling, and machinery alignment. Ability to read mechanical and structural drawings. Experience working at heights and using appropriate fall protection. Must pass a drug screen & background...- Job Description Job Description IT Support Specialist /Break Fix - Part Time Employment Type: Part Time (W-2) Hours: 16 hours per Week Location: Anniston, AL (On-Site) In this position, you will be responsible for handling circuits to the end user and supporting...Extra income16 hoursPart timeRemote workFlexible hours
- ..., and related technology resources. This position is responsible for troubleshooting technical issues, installing and configuring equipment, supporting end users, and assisting with the day-to-day operation of the company's information technology infrastructure. The ideal...For contractorsWork experience placementWork at officeLocal area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Heavy Mobile Equipment Mechanic. Be the first to apply!


