RFIC Layout Engineer
Apple
The Wireless SoC Radio Team designs state-of-art highly energy efficient CMOS radios, from RF to bits. To deliver these radios, our team is responsible for the design of a wide range of RF, analog, and mixed-signal blocks from RF front-end amplifiers to data converters, including baseband filters, baseband and RF phase-locked loops, crystal oscillators, and band gap references.
Description
As an RFIC Layout Engineer, you will be a key member of a RFIC team, researching, designing and bringing the next-generation of wireless technologies into high-volume production in advanced CMOS technology nodes.
Responsibilities
- Detailed transistor-level layout of RF and analog circuit blocks including LNA, mixers, PLL, LO generation, modulators, power amplifiers, ADC/DAC, baseband filters, and bandgap/bias/LDO.
- Block level layout through full verification flow including extraction, DRC, LVS, and DFM checking.
- Co-work with designers on block level floorplanning.
- Layout review for power/gnd routing, electromigration, signal path check, differential and IQ matching, and signal coupling.
Minimum Qualifications
- BS and 10+ years of relevant industry experience.
Preferred Qualifications
- Experience in custom RF/analog layout for radio transceivers with extensive knowledge of deep sub-micron CMOS.
- Knowledgeable in layout techniques for device matching, minimizing parasitics, RF shielding, and high frequency routing.
- Solid understanding of RC delay, electromigration, and coupling.
- Understanding of guard rings, DNW, PN junctions, and advanced process effects such as LOD, WPE.
- High level proficiency in interpretation of CALIBRE DRC, ERC, LVS in FinFet Technology.
- Knowledge of CADENCE layout tools.
- Scripting skills in PERL or SKILL.
Apple is an equal opportunity employer that is committed to inclusion and diversity. We seek to promote equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. Learn more about your EEO rights as an applicant
At Apple, we believe accessibility is a fundamental human right. You’ll find that idea reflected in everything here — in our culture, our benefits and our digital tools. By welcoming as many perspectives as possible, we help you build a career where you feel like you belong.
Learn about accessibility in Apple’s workplace
Learn about reasonable accommodations for job applicants
Apple accepts applications to this posting on an ongoing basis.
#J-18808-Ljbffr- ...Apple, Inc. seeks an RFIC Layout Engineer to join the Wireless SoC Radio Team. You will perform detailed transistor-level layout of RF/analog blocks (LNA, PLL, mixers, PA, ADC/DAC), verify through extraction, DRC/LVS/DFM, and collaborate on floorplanning and power/ground...Suggested
- ...Accler8 Talent is partnering with an AI hardware company to hire an experienced PCB Layout Engineer to develop complex boards for high-performance computing systems. You will manage layout from planning through manufacturing release, handling dense component placement,...Suggested
$150k - $210k
...distribution, mechanical packaging, thermal limits, regulatory requirements, supplier capability, and fast-moving engineering schedules.As an Electrical PCB Layout Engineer, you will own PCB layout execution in Altium from schematic handoff through fabrication and assembly...SuggestedContract workLocal areaRemote workFlexible hours- ...PCB Layout Engineer Accler8 Talent is partnering with an AI hardware company to hire an experienced PCB Layout Engineer to develop complex boards for high-performance computing systems. You'll manage layout from initial planning through manufacturing release, with responsibility...SuggestedFlexible hours
$180k - $300k
...Cooperidge Consulting Firm is seeking an Analog Layout Engineer. This role offers the opportunity to join a cutting-edge team developing next-generation integrated circuits for AI applications. The engineer will be responsible for the layout design and implementation of...SuggestedHourly payFull time- ...Zipline is seeking an Electrical PCB Layout Engineer to own PCB layout execution in Altium from schematic handoff through fabrication release. You will partner with electrical and mechanical engineers and manufacturing teams to ensure producibility and robust board designs...
- ...About the Role We are looking for a PCB Layout Engineer to design high-density electronics for next-generation robotic systems. You will own PCB layout from floor planning through fabrication release, working closely with electrical, SI/PI, mechanical, and manufacturing...Flexible hours
$98k - $202k
...GlobalFoundries is seeking a Senior RF IC Design Engineer to develop high-performance RF and microwave... ...CMOS and quantum systems. This role will drive RFIC designs from architecture through electromagnetic-aware layout, tapeout, and silicon characterization while partnering...Local area$170k - $215k
...and improve them until they work at scale.We are roboticists, engineers, operators, and builders. We believe the next great technology... ...evidence.Own the risk assessment for the testing itself: site layout, personnel positions, exclusion zones, emergency stop provisions...Work at officeFlexible hours$117.8k - $176.8k
...O+U.Stantec is currently seeking an Instrumentation and Controls Engineer for any one of our California state office locations - San... ...with equipment selection, equipment and communication network layouts, and process control design coordination with other engineering...Full timeContract workTemporary workPart timeFor contractorsCasual workWork at officeLocal areaFlexible hours- ...Principal Electrical Engineer, Implant ElectronicsCoherence Neuro is a highly interdisciplinary neurotechnology company solving some of... ...development boards to a dense rigid-flex/HDI implant PCBA, working with layout, fabrication and assembly partners. Resolve cross-subsystem...Work at officeFlexible hours
$216k - $255k
...in and out of the office. We are looking for a Staff Electrical Engineer to join our hardware team working on future wearables and... ...Software Tools: Experience working with schematic capture and PCB layout software (ie. Altium, KiCad, etc.)Prototyping: Hands on experience...Work at officeLocal areaRemote workOverseasFlexible hours$180k - $230k
...wear and lubrication Who is it for Engineers, researchers, students and industry professionals... ...skill we are looking for is not generic RFIC execution. It is the ability to reason... ...behavior, stack selection, parasitics, layout effects, and RF process-node selection...For contractorsVisa sponsorship$170k - $250k
...the RoleWe’re looking for a Senior/Staff electrical and firmware engineer who designs the board and writes the firmware for connected... ...lifecycle of electrical hardware from concept, schematic capture, layout review, through bring-up, validation, certification, and...Hourly payContract workWork at officeLocal areaRemote workFlexible hours$152.9k - $210.2k
...up next. To get there, we need an experienced Staff Electrical Engineer to join the Consumer Entertainment engineering team and help us... ...architecture, component selection, schematic capture, and PCB layout.Excellent hands-on electronics evaluation and troubleshooting skills...Full timeContract workLocal areaWorldwideFlexible hours- ...is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets.... ...control narratives, instrument data sheets, I/O lists, panel layouts, loop diagrams, and single-line/control schematics. Specify...Full timePart timeWork at officeRemote workRelocation
- ...of vehicles.Job DescriptionAs a Sr. Automation / Manufacturing Engineer on the Ample team, you will need to be hands-on, focused on supporting... ..., power tools, and hand toolsExperience in factory design, layout, and simulation areas would be a plus, including:Experience in...
$35 - $58 per hour
...impact as we build for the long term. About Samsara Hardware Engineering: Samsara's hardware systems bridge the gap between the... ...: Take a concept from block diagram to schematics and through layout; either on your own or navigate the process with JDM resources...Full timeInternshipWork at officeRemote workRelocation packageMonday to FridayFlexible hours$188k - $275k
...DoCoreWeave is looking for an experienced Staff Product Quality Engineer to own quality strategy and execution for new compute hardware... ...Partner with hardware and systems engineering to review schematics, layouts, and system architecture docs for quality and testability...Permanent employmentFull timeCasual workWork at office$180k - $250k
...Electrical Engineering Manager - Mixed Signal Hardware Astranis builds advanced satellites for high orbits, expanding humanity’s reach... ...hardware from concept through production (schematic capture, layout, bring-up, characterization, etc) ~ Proven leadership through...Permanent employmentFlexible hours$140k - $200k
...dynamic and collaborative environment, driven by first principles engineering, solving difficult problems. Job Overview As an Senior/Staff... ...definition and modeling through schematic capture, PCB layout, prototyping, testing, validation, and manufacturing support....$170k - $185k
...Staff Systems Electrical Engineer Hardware Development · San Francisco We're Impulse. We're a team of engineers, designers and innovators... ...the same time. Emissions compliance is largely determined by layout and switching decisions made months before the first system-level...Work at officeRemote work2 days per week1 day per week$170k - $250k
...whole system works. We're building out an experienced and diverse set of electrical engineers to increase our velocity, bandwidth, and operations.About the RoleYou'll bring PCB layout in-house — a core quality goal — owning floorplanning, stackups, and layout while coordinating...Hourly payWork at officeLocal areaRemote workFlexible hours- ...Test team is looking for a mechanically oriented Systems Test Engineer to design and execute structural and dynamic tests for warehouse... ...manuals Design and build custom test fixtures and instrumentation layouts that integrate electromechanical actuators, strain measurement,...Work experience placementWork at office
$150k - $180k
...Senior Mechanical Engineer/Project ManagerAt EXP, we're driven to provide innovative solutions for the world's built and natural environments... ...floor plans showing mechanical and HVAC duct, piping, device layouts, equipment, etc.Perform cooling and heating load calculations....For contractorsWork at officeFlexible hours$154k - $230k
...functionality at the system and subsystem level.Drive the entire hardware lifecycle from requirements definition and schematic capture to layout completion, bring-up, validation and into high volume production.Identify and solve complex hardware failures and lead root-cause...Contract workWork experience placementLocal areaOverseasFlexible hours- ...Electrical Engineer, Implant ElectronicsCoherence Neuro is a highly interdisciplinary neurotechnology company solving some of the most... ...characterization. PCB design in Altium Designer: schematic capture, layout and fabrication/assembly outputs, for boards you have brought...Work at officeFlexible hours
$71.68k - $146.79k
...with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information... ...designer, develop specifications, system narratives and system layouts for a variety of projects and project sizes.Participates in /...Work at officeRemote workWork from homeFlexible hours- Mechanical Engineer - Mission Critical Our Mechanical Engineering team is looking to add an experienced team member to our group of talented... ..., and redline markups.Develop and review mechanical system layouts in Revit - including HVAC, plumbing and/or fire protection - in...Work at officeWork from homeFlexible hours
$114k - $156.8k
...transform the world for good. Your impact We're seeking a Mechanical Engineer to join our growing California Buildings team. In this role,... ...schedules, and engineering reports.Develop mechanical system layouts using Revit and BIM technologies.Coordinate with electrical,...Full timeContract workFor contractorsRemote work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to RFIC Layout Engineer. Be the first to apply!




