Mechanic
Pender County Schools
Position Type:
Classified/Mechanic Date Posted:
6/15/2026 Location:
PCS Transportation Department Date Available:
ASAP Closing Date:
Until Filled
POSITION TITLE: Transportation Mechanic WORKING TITLE: Transportation Mechanic SCHOOL/DEPARTMENT : PCS Transportation Dept. LOCATION: 995 Penderlea Hwy, Burgaw NC 28425 PAY GRADE: NC State Salary for Transportation Staff FLSA STATUS: Non-Exempt
REPORTS TO: Transportation Director/Transportation Supervisor WORK WEEK SCHEDULE: Monday - Friday WORK HOURS: 8:00 AM - 5:00 PM; occasional evenings and weekends MONTHS/YR: 12 POSITION PURPOSE
To ensure to assist in providing safe and efficient transportation for the students in Pender County Schools. POSITION ANALYSIS
Transportation mechanic is a vital employee of the Transportation Department. Mechanic must be responsible and never compromise safety. MINIMUM QUALIFICATION STANDARDS KNOWLEDGE, SKILLS, AND ABILITIES
• Working knowledge of vehicle operation and maintenance
• Skills to perform manual tasks associated with engine maintenance, tire replacement, fuel dispensing, washing vehicles, etc.
• Ability to physically perform minor repairs
• Ability to follow oral and written instructions
• Some experience and training with vehicle operation, maintenance and repairs are preferred EDUCATION, TRAINING, AND EXPERIENCE
• Minimum of high school diploma or equalivant CERTIFICATION AND LICENSE REQUIREMENTS
• Must hold or acquire North Carolina School Bus Inspector Certification
• Must hold or acquire North Carolina Class A Commercial Driver's License with, P & S endorsements SPECIAL REQUIREMENTS
• Ability to work flexible hours (evenings, weekends) PREFERRED QUALIFICATIONS
• A two-year degree or equivalent ESSENTIAL DUTIES AND RESPONSIBILITIES
• Perform general maintenance as needed
• Perform monthly inspections for school buses and activity buses
• Lubricate moving parts of vehicle chassis
• Check, add, and replace brakes and steering fluids
• Install air, oil, water and other filters on vehicles
• Replace wiper blades and fan belts
• Rotate, replace and repair truck size tires
• Replace brake linings on Buses and various vehicles
• Drain and clean radiators
• Inspect exterior and interior of vehicles for defects
• Remove minor dents and other body repairs
• Check and repair doors and wheelchairs lifts on buses
• Perform any other duties assigned by Director of Transportation or Transportation Supervisor WORKING CONDITIONS PHYSICAL DEMANDS
• Ability to lift 50+ pounds of material repeatedly on a daily basis
• Must be able to step up & down repeatedly and get in and out of vehicles
• Must be able to access "underneath" School Buses and other vehicles to change oil, grease, and service, etc.
• Ability to work with and around Hazardous Materials such as; Automotive Batteries, Automatic Transmission fluid, Anti-Freeze, etc WORK ENVIRONMENT
• Ability to work in an indoor or outdoor setting, with hot, humid or cold conditions DISCLAIMER:
The above statements are intended to describe the general purpose and responsibilities assigned to this position.
They are not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and skills that may be required of the employees assigned to this position. This description may be revised by the supervisor, with HR review and approval, at any time. VERSION DATE(S): 12/2025 Attachment(s):
Classified/Mechanic Date Posted:
6/15/2026 Location:
PCS Transportation Department Date Available:
ASAP Closing Date:
Until Filled
POSITION TITLE: Transportation Mechanic WORKING TITLE: Transportation Mechanic SCHOOL/DEPARTMENT : PCS Transportation Dept. LOCATION: 995 Penderlea Hwy, Burgaw NC 28425 PAY GRADE: NC State Salary for Transportation Staff FLSA STATUS: Non-Exempt
REPORTS TO: Transportation Director/Transportation Supervisor WORK WEEK SCHEDULE: Monday - Friday WORK HOURS: 8:00 AM - 5:00 PM; occasional evenings and weekends MONTHS/YR: 12 POSITION PURPOSE
To ensure to assist in providing safe and efficient transportation for the students in Pender County Schools. POSITION ANALYSIS
Transportation mechanic is a vital employee of the Transportation Department. Mechanic must be responsible and never compromise safety. MINIMUM QUALIFICATION STANDARDS KNOWLEDGE, SKILLS, AND ABILITIES
• Working knowledge of vehicle operation and maintenance
• Skills to perform manual tasks associated with engine maintenance, tire replacement, fuel dispensing, washing vehicles, etc.
• Ability to physically perform minor repairs
• Ability to follow oral and written instructions
• Some experience and training with vehicle operation, maintenance and repairs are preferred EDUCATION, TRAINING, AND EXPERIENCE
• Minimum of high school diploma or equalivant CERTIFICATION AND LICENSE REQUIREMENTS
• Must hold or acquire North Carolina School Bus Inspector Certification
• Must hold or acquire North Carolina Class A Commercial Driver's License with, P & S endorsements SPECIAL REQUIREMENTS
• Ability to work flexible hours (evenings, weekends) PREFERRED QUALIFICATIONS
• A two-year degree or equivalent ESSENTIAL DUTIES AND RESPONSIBILITIES
• Perform general maintenance as needed
• Perform monthly inspections for school buses and activity buses
• Lubricate moving parts of vehicle chassis
• Check, add, and replace brakes and steering fluids
• Install air, oil, water and other filters on vehicles
• Replace wiper blades and fan belts
• Rotate, replace and repair truck size tires
• Replace brake linings on Buses and various vehicles
• Drain and clean radiators
• Inspect exterior and interior of vehicles for defects
• Remove minor dents and other body repairs
• Check and repair doors and wheelchairs lifts on buses
• Perform any other duties assigned by Director of Transportation or Transportation Supervisor WORKING CONDITIONS PHYSICAL DEMANDS
• Ability to lift 50+ pounds of material repeatedly on a daily basis
• Must be able to step up & down repeatedly and get in and out of vehicles
• Must be able to access "underneath" School Buses and other vehicles to change oil, grease, and service, etc.
• Ability to work with and around Hazardous Materials such as; Automotive Batteries, Automatic Transmission fluid, Anti-Freeze, etc WORK ENVIRONMENT
• Ability to work in an indoor or outdoor setting, with hot, humid or cold conditions DISCLAIMER:
The above statements are intended to describe the general purpose and responsibilities assigned to this position.
They are not intended to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and skills that may be required of the employees assigned to this position. This description may be revised by the supervisor, with HR review and approval, at any time. VERSION DATE(S): 12/2025 Attachment(s):
- Mechanic
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Mechanic in Burgaw, NC vacancy
- Who We Are At West Fraser, we don’t just manufacture lumber — we build people. We’re a team-driven manufacturing facility focused on safety, reliability, and personal growth. Our Millwrights are the glue that keeps our mill together and running. Why This Role Matters...SuggestedWork experience placementShift workWeekend work
$44.29k - $52.59k
...installation of buildings and facilities, performs skilled maintenance and repair work in electrical, painting, carpentry, plumbing and mechanical fields, installs and maintains street signs, and related work as apparent or assigned. Work is performed under the limited...SuggestedPermanent employmentFull timeWork at officeFlexible hours- ...build people. We’re a team-driven manufacturing facility focused on safety, reliability, and personal growth. Our Millwrights and Mechanics are the glue that keeps our mill together and running. Why This Role Matters At Armour Lumber Mill, uptime isn’t optional. Our...SuggestedShift workWeekend work
$26 - $30 per hour
...systems. Your work directly impacts production, safety, and equipment reliability. This is a great opportunity for someone with mechanical aptitude who wants to develop their maintenance career in a stable industrial environment. What You'll Do Perform...SuggestedHourly payDaily paidFull timeCasual workShift workDay shift$19 per hour
...Job Description Job Description Now Hiring!! Machine Operators Burgaw, NC 1st Shift $19.00/Hour Are you mechanically minded, hands-on, and ready to build something great? Ambassador Personnel is hiring Machine Operators for an exciting manufacturing opportunity...SuggestedHourly payImmediate startShift workDay shift- Salary: Depends on Qualifications Location : 605 Fremont Street Burgaw Job Type: Full-Time Permanent Job Number: 2026--0715 Department: PUBLIC UTILITIES Opening Date: 07/15/2026 Closing Date: 8/15/2026 11:59 PM Eastern General Definition of Work Pender County is seeking...Permanent employmentFull timeFlexible hours
$16 - $29 per hour
Hourly Wage: $16 - $29 per/hour *The actual hourly rate will equal or exceed the required minimum wage applicable to the job location. Additional compensation includes annual or quarterly performance incentives. Additional compensation in the form of premiums may...Hourly payMinimum wageFull timeTemporary workPart timeShift workDay shift$18 per hour
Job Description Job Description Job Title: Fabricator Technician Location: Currie, NC Type: Contract Compensation: $18.00 per hour Work Model: Onsite – onsite Hours: 40.0 hours per week Security Clearance: Not specified in the job description ...Hourly payContract workZero hours contractLocal area- CTS is hiring a skilled and dependable Industrial Maintenance Technician for our Rocky Point, NC location. The Maintenance Technician will complete maintenance tasks, repairs and responsibilities in accordance with best practices and schedule requirements to meet...Afternoon shift
- Commercial Service Technician Wilmington NC - Castle Hayne, NC 28429 Overview Position Type Full Time Job Shift Day Education Level High School Category Construction Description Job Summary: Plans and coordinates activities concerned with the installation...Full timeTraineeshipShift work
$25 - $50 per hour
Role Overview TSA is accepting applications for Lead and Supervisory Transportation Security Officers at airports in Burgaw. These roles are ideal for individuals looking to step into leadership positions within airport security operations. TSA provides training to ...Shift workNight shiftWeekend work- ...dealerships is now accepting applications for full-time self-motivated service technicians with a customer-focused attitude. Local mechanics and small engine repair persons interested in a career change are encouraged to apply. We will train the right people and provide...Full timeLocal areaFlexible hours
$90k
Job Description Job Description "Your customer doesn't care how much you know until they know how much you care!" Founded in 1976, and based out of Alexandria, VA, Michael and Son Services, Inc. is the premier provider of Electrical, Plumbing, HVAC, and Restoration...Temporary workWork at officeFlexible hours$1,200 - $1,400 per week
NEW PAY RAISE! Earn .60 CPM + up to .09 CPM Performance Pay At EPES Transport, we're hiring experienced CDL-A drivers for short haul routes that keep you moving and get you home on a schedule you can count on. If you're ready for consistent freight, competitive pay,...Weekly payDaily paid- Job Description Job Description Nature & scope The Environmental Services Technician (EVS) with Maintenance Responsibilities is responsible for maintaining a clean, safe, and well-maintained environment for residents, visitors, and team members. This role performs...Relocation
$19.5 per hour
As a company, we promote a culture of honesty and integrity, and value the trust it allows us to build with customers and employees alike. Our focus on our people is what sets us apart and keeps our customers coming back to work with us! If you are seeking to be a part...Hourly payLocal areaFlexible hours$19 - $32 per hour
The hourly rate will equal or exceed the mandatory minimum wage applicable to the desired location. Current hourly wage ranges from $19 to $32 per hour. Additional compensation is available through annual or quarterly performance incentives. Premiums may be paid in amounts...Hourly payMinimum wageFull timeTemporary workPart timeSeasonal workShift work- ...Ready to put your computer numerical control (CNC) experience into practice as a manual mill machinist? Do you have a fine eye for detail, mechanical aptitude and a safety-first mindset? If so, companies across a wide range of industries are eager to hire you right now....
$26 - $40 per hour
CNC Lathe Machinist Schedule: Full-Time Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we've invested in brand-new, state-of-the-art machines...Hourly payLong term contractFull time- Manual Lathe Machinist | 1st Shift Opportunity Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we've invested in brand-new, state-of-the-art machines...Long term contractDay shift
$54.08k - $83.2k
...Lathe Machinist Ready to put your skills as a lathe machinist to work? Do you have a fine eye for detail, mechanical aptitude and a safety-first mindset? If so, Randstad can connect you with companies in your local area. Learn a little bit more about the role as well...Local areaShift work$28 - $38 per hour
We are seeking an experienced CNC Machinist/Programmer for a very established, growing company. The ideal candidate for the CNC Machinist/Programmer will be able to operate, program formats and have a broad knowledge of machining. CNC Machinist/Programmer Responsibilities...Hourly pay- Job ID: 526277 Oldcastle, a CRH company, is reinventing what's possible in building solutions. We are the leading provider of innovative outdoor living products and utility infrastructure solutions for the water, energy, and communications markets throughout North America...For contractorsWork experience placementLocal areaShift work
- ...Qualifications: ~2 years previous experience operating flexo folder gluer or similar printing and packaging machinery. ~ Basic mechanical aptitude and ability to troubleshoot equipment issues. ~ Ability to read and interpret job orders, specifications, and...Full timeContract workDay shift
$26 - $40 per hour
Trillium Professional is hiring for a CNC Lathe and Mills Machinists / Programmers in the greater Wilmington Area, NC (On-site)! Pay rate is $26.00 - $40.00/hour (Based on Experience). Schedule is working full-time, consistent 40-50 hour weeks with overtime available...Hourly payFull timeFlexible hours$26 - $40 per hour
Manual Milling Machinist | 1st Shift Opportunity Proudly serving our clients for over 40 years, we continue to expand thanks to long-term contracts and a reputation for precision and reliability. As we continue to grow, we've invested in brand-new, state-of-the-art ...Hourly payLong term contractDay shift- ...to support plant operations and ensure equipment availability and proper functioning. The ideal candidate will possess a strong mechanical, technical, and troubleshooting background with the ability to repair various systems on large production machinery. Maintenance...Flexible hoursShift workNight shiftRotating shift
- Job Description Job Description Description: Position Summary The Quality Control Lead is responsible for leading daily quality control operations while serving as the primary coordinator for critical operational issues (Code Red events). This role ensures all...Work at officeImmediate start
- ...Proficiency with precision measuring tools (calipers, micrometers, height gauges) and basic familiarity with CMM operation. ~ Mechanical aptitude, strong troubleshooting skills, and attention to detail to maintain part quality and minimize scrap. ~ Ability to lift...Ongoing contractLocal areaShift workDay shiftAfternoon shift
$150k
Job Description Job Description "Your customer doesn't care how much you know until they know how much you care." Michael and Son Services, Inc., founded in 1976 and based in Alexandria, VA, is a leader in providing top-tier Electrical, Plumbing, HVAC, and Restoration...Temporary workWork at officeFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Mechanic. Be the first to apply!



