Local Shop Layout Pipe Fitter
$48 - $65 per hourMatrix Service Inc.
Job Description
Job Description
Job Summary:
Work under the direction of a Foreman. Lays out, installs, maintains, and repairs all types of piping systems for maintenance, tank and new construction. Individual must possess a high level of skill in the industrial maintenance/turnaround/construction/or mechanical environment.
Job Functions:
- Actively supports the Company’s commitment to safety and its “Core Values.”
- Always represents the Company with high moral standards while adhering to the Company’s “Code of Business Conduct and Ethics.”
- Perform duties within a precise limit or standard of accuracy (Quality Control).
- Works well with peers, supervision and the QA/QC Department.
- Interprets drawings and sketches. Plans detail of working procedure and select materials in accordance with engineering standards.
- Lays out work; calculates dimensions; makes sketches of piping systems when needed.
- Sets up and operates bending, threading and cutoff equipment and uses hand tools or torch to shape, prepare and fabricate pipe for work to be done.
- Assembles and tests a variety of piping components.
- Set up for pipe to be welded or special type joints.
- Fastens hangers and supports.
- Handles or makes provision for the handling of materials, equipment and tools to and from job site in shop in connection with work.
- Make reports of work performed.
- Work within precise limits and standards of accuracy.
- Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
- Perform other responsibilities as required or assigned.
Qualifications:
- Minimum of four (4) years or more in refinery maintenance/turnaround/or construction experience.
- A general knowledge of basic hand tools.
- Must be able to pass the Pipefitter Skills Test at or above 70% or complete the NCCER certification for your craft.
- Complete Company’s Safety training, Process Safety Management training and Client / Site specific training.
- Must be able to obtain and maintain an active status within the approved drug testing program.
- Must pass background check.
- TWIC & HHFT card
Verification of 8,000 craft related hours. Graduated journeyperson status preferred.
Physical Requirements:
- Employee will be standing, walking, bending, squatting and lifting.
- Must be able to hear, speak, understand and communicate effectively.
- May be required to lift, carry and move up to 50lbs.
- Will occasionally work at heights, climb ladders and stairways and work from platforms while utilizing proper fall protection and safety protocols.
- Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long periods of time, up to 12 hours a day.
- Will be required to wear personal protective equipment (PPE) including but not limited to hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.
Washington law requires pay information in job postings. The typical hiring range for this position in Washington is shown below. The pay rate will depend on the successful candidate’s qualifications and prior experience, specific skill set, geographic location, internal equity, and other factors influencing pay. As such, the actual salary may fall closer to one or the other end of this range, and in certain circumstances, may fall outside the listed hiring range.
Hiring range: $48.00 to $65.00 per hour
Full range for this position, available over time: $48.00 to $65.00 per hour
In addition, full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance.
At Matrix, we are dedicated to building a culture of engagement, respect, collaboration and teamwork. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization.
EEO/M/F/Disability/Vets Employer
We are an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category.
Applicants must be currently authorized to work in the United States on a full-time basis.
$28 - $36 per hour
...MIG Welder - Custom Shop - Stainless - 4-10 hr shifts This Jobot Job is hosted by: Jamal Elkhateib Are you a fit? Easy Apply now... ...or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees...Local areaHourly payMonday to FridayFlexible hoursShift work$48 - $65 per hour
...G and 2” .344 GTAW 6G and/or .5 " FCAW). Looking for locals only no travel or per diem. Job Functions: Actively... ...the QA/QC Department. Select equipment and plan layout and assembly of welding. May weld pipe of all kinds, sizes and alloys by process of ARC,...Local areaHourly payDaily paidFull time- ...and larger-scope fabrication or pipefitting work is performed by our union Sprinkler Fitters. What You'll Do Inspection, Testing, Maintenance : Work in accordance with NFPA 25 and local standards to ensure systems are working correctly and address any issues Repair &...Local areaFull timeWork at officeFlexible hours
- ...safety and training requirements. Responsibilities include welding pipes, structural steel, and non-piping components, adhering to QA/QC standards with NDE testing, and working to precise tolerances. Local candidates only; travel and per diem are not offered. #J-18808-...Local areaDaily paid
- ..., age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot's policy to...Local areaFor contractorsShift workDay shift
$30 - $40 per hour
...receive consideration for employment without regard to race, color, religion, sex (including sexual orientation and gender identity), national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law....Local areaShift workNight shiftWeekend work$25.59 - $38.38 per hour
...control center, contractors, and landowners. Provide oversight of third-party work on or near company assets. Ensure parts, tools, and local inventories are available and maintained. Support Scalehouse operations. Learn the Scalehouse Rack Coordinator position (on-job...Local areaHourly payFull timeFor contractorsWork at officeVisa sponsorshipFlexible hours$20 - $40 per hour
...identity), national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or those requiring a reasonable...Local areaFull timeShift workWeekend work$30 - $40 per hour
...identity), national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or those requiring a reasonable...Local areaFull timeTraineeshipShift workWeekend work$20 - $30 per hour
...hands‑on training to learn our machines, parts, processes, and shop environment, helping you build confidence and skills as you contribute... ...other characteristic protected by applicable federal, state, or local law. Applicants wishing to receive information on RTCA’s...Local areaHourly payFull timeShift workAfternoon shift$90k - $120k
..., age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to...Local areaFor contractorsFor subcontractor- ...properties. Key Responsibilities Install, repair, and maintain pipes, fixtures, water heaters, sump pumps, and other plumbing... ...tankless units) Detect and repair gas line issues in compliance with local codes and safety standards Collaborate with other...Local areaHourly payFull timePart timeApprenticeship
- Primary Purpose Of This Position Weld steel parts for structural, plate, and misc. steel assemblies per shop drawings and AWS quality requirements. Position: Fitter FLSA Status: Non-Exempt (Hourly) Reporting Relationships Production Manager Shop Foreman Primary...Hourly payShift work
- ...Responsibilities Diagnose and repair complex plumbing systems including pipes, fixtures, water heaters, sump pumps, and sewer lines Lead... ...plumbers on job sites Ensure compliance with state, local, and municipal codes and safety regulations Pull permits and...Local areaPart timeApprenticeship
$24.73 - $37.65 per hour
...Reimbursement opportunities ~ We also recognize and reward our employees for the great outcomes they produce and for living Our Values with local programs. Prior to commencing employment, you will be required to successfully complete a pre-employment medical examination,...Local areaTemporary workMonday to FridayFlexible hoursShift workAfternoon shift$100k
Your future starts here! Earn over $100K per year in total compensation! We are a premier aerospace manufacturer in Tacoma, and we are seeking an experienced CNC Machinist. Come create a lasting career at General Plastics Manufacturing Company, and not just ...Hourly payPermanent employmentFor subcontractorFlexible hoursShift workDay shiftAfternoon shift$23 - $40 per hour
...is expanding its Tacoma Commercial Division and looking for a motivated, detail-oriented Commercial Countertop Templater / Digital Layout Technician . This is a specialized field position that combines construction, precision measuring, digital templating, and CAD technology...Full timeFor contractorsWork from homeFlexible hoursEarly shift- ...fire sprinkler systems, as well as maintain piping systems, fixtures, sprinklers and... ...specifications Mentor and coach Fire Sprinkler Fitter Apprentice's and Helpers on proper... ...at heights. Work Environment: Frequent local travel and occasional regional and non-regional...Local areaApprenticeshipWork experience placementWork at office
- ...Job Description Job Description We're growing, our shop is busy, and we're hiring NOW!!! Come grow your career with a team that... ...engagement is at the heart of what we do. We're proud to sponsor local events, charities, and initiatives that make a positive impact in...Local area
$20 - $40 per hour
...Job Description Job Description Job Title: CNC Mill Machinist Job Description Join a busy production machine shop as a CNC Mill Machinist where you will set up, program, and operate CNC mills to produce precision metal parts. You will work with jigs and fixtures...Weekly payContract workTemporary workSummer workWork at officeDay shift$30 - $50 per hour
...CNC Machinist Job Description: PrideStaff is working with a local aerospace machining company who is in search of multiple CNC Machinists... .... The ideal CNC Machinist has multiple years of machine shop leadership, solid knowledge of CNC Lathe Machines, basic understanding...Local areaFull timeShift workDay shift$35 - $52 per hour
...genetic information, sexual orientation, gender identity, or any other protected characteristic under applicable federal, state, or local law. \nCompany Description At TruFit we understand that our success is based on meeting the needs of our clients and workforce...Local areaMonday to Friday$22.5 per hour
...discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. - $21.50...Local areaHourly payFull timeTemporary workPart time$20 - $38 per hour
...protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination...Local areaPermanent employmentShift work- ...Job Description Job Description We're growing, our shop is busy, and we're hiring NOW!!! Come grow your career with a team that... ...engagement is at the heart of what we do. We're proud to sponsor local events, charities, and initiatives that make a positive impact in...Local areaHourly payPrice work
$100k
Job Type Full-time Description YOUR FUTURE STARTS HERE! Earn $100K per year or more in total compensation! We are a premier aerospace manufacturer in Tacoma, and we are seeking an experienced CNC PROGRAMMER/MACHINIST to join our team. COME CREATE...Hourly payPermanent employmentFull timeFor contractorsMonday to FridayFlexible hours$28 - $36 per hour
Description Tradesmen International is immediately hiring experienced CNC Lathe Machinists for projects located in or around Tacoma, WA . This is a first shift opportunity and the pay rate is $28-$36/hour based on experience and skill level. If you are a Machinist...Work at officeImmediate startDay shift$20 - $40 per hour
...Job Title: CNC Mill Machinist Job Description Join a busy production machine shop as a CNC Mill Machinist where you will set up, program, and operate CNC mills to produce precision metal parts. You will work with jigs and fixtures, automate processes where possible...Weekly payContract workTemporary workSummer workDay shift$22 - $40 per hour
...with swing shift differentials applied. The environment is fast-paced and focused on precision manufacturing, with standard industrial shop attire appropriate for working around CNC machinery. Job Type & Location This is a Contract to Hire position based out of Fife,...Weekly payContract workTemporary workWork at officeShift workAfternoon shift$27 - $35 per hour
Job Description CNC Programmer Location: Tacoma, WA Pay: $27-35 / hour (DOE) Who We Are: Our Client is a precision manufacturing operation focused on CNC machining, inspection processes, tooling, and high-quality production. What ...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Local Shop Layout Pipe Fitter. Be the first to apply!




