Building Engineer
$64.98k - $76.44kCushman & Wakefield
Job Title Building Engineer
Job Description Summary
Responsible to ensure the efficient operation and maintenance of mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and housekeeping for assigned properties.Job Description
• Perform all plumbing, electrical, or HVAC requirements of the building(s)
• Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc.
• Monitor and adjust all mechanical/pneumatic equipment, steam stations, control gauges, distributor panels, valves, thermostats, diffusers, and other equipment necessary to provide a comfortable environment for the buildings
• Verify field conditions and perform any necessary repairs or adjustments
• Monitor Energy Management
• Repair doors, ceilings, hand railings, and floors and other general repairs, adjustments and installations about the property
• Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.)
• Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations and industry best practices, including changing filters, cleaning coils, flushing condensers, punching tubes, greasing fan, pump and motor bearings as required, inspecting and adjusting belts, replacing motor bearings, aligning pulleys and shafts, monitor condenser, chilled, heating and secondary water chemical treatment and its associated feed equipment, clean and maintain cooling towers, and perform annual inspections and other scheduled routines as directed
• Inspect engine room equipment, fan room equipment, cooling tower, all motors, house pumps, electric rooms, back-up generator, fire pump(s), sump pump(s), and ejector pumps. Replace lamps, light fixtures, reinstall or replace signage, verify rooms are clean and clear of obstructions and debris
• Check for properly operating emergency exit signs and lights and ensure free and clear access to emergency stairs and exits. Perform additional fire and life safety inspections as per NFPA and local jurisdiction, C&W standards, building protocol and as directed by superiors and property management
• Document and report activities to supervisor
• Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns
• Comply with all applicable codes, regulations, governmental agency, and company directives as relates to building operations and practice safe work habits
• Complete all required C&W Safety Training as scheduled annually
• Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours
IMPORTANT EDUCATION:
• High School Diploma of GED Equivalent
• Graduate of apprentice program or trade school preferred
IMPORTANT EXPERIENCE:
• 5+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting
ADDITIONAL ELIGIBILITY QUALIFICATIONS:
• Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.)
• May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements
• Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable)
• Basic Computing Skills in Outlook, Excel & Word
• Experience in operation, maintenance and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, water systems, etc.
• Knowledgeable in energy management systems, techniques and operations
• Thorough knowledge in all building systems operations, maintenance and repair
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties
WORK ENVIRONMENT:
This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Regularly required to travel outside between properties in varying weather conditions.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
• Must have ability to frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices
• Regularly required to crouch and reach to install/move equipment
• Involves movement between departments, floors, and properties to facilitate work
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $31.24 - $36.75Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.
In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at View phone number on aiapply.co or email View email address on aiapply.co . Please refer to the job title and job location when you contact us.
INCO: “Cushman & Wakefield”- CBRE is seeking a Building Engineer to monitor, maintain, and repair building systems including plumbing, electrical, HVAC, and controls within a commercial facility in Zebulon, NC. The role supports preventive maintenance and emergency repairs to uphold performance and...Suggested
- About The Role As a CBRE Building Engineer, you will be responsible for monitoring, maintaining and repairing building system operations and the performance of various areas including plumbing, electrical, painting, roofing, heating, and cooling. This job is part of the...SuggestedWork at officeLocal areaVisa sponsorshipShift work
$83.97k - $143.94k
...of AmericaSalary: $83,966 - $143,942Company: Siemens Design Engineering Manager-PACS Job ID 518736 Posted since 18-Aug-202... ...engineering-to-manufacturing flow, quality, and cycle time—while building the training and processes needed to become best-in-class.You’...SuggestedPermanent employmentFull timeWork at officeLocal areaImmediate startRemote workRelocation package- ...Job Description Job Description Jr. Product Engineer Department: 171024 – Product Business Department Reports to: Director of Product Business Location: Wendell, NC Position Status: Salary Status: Full-time Management Level: Non-Management...SuggestedFull time
$74.97k - $128.52k
...of AmericaSalary: $74,970 - $128,520Company: Siemens Project Engineer Job ID 519325 Posted since 21-Aug-2026 Organization... ...-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced...SuggestedPermanent employmentFull timeWork at officeLocal areaImmediate startRemote workRelocation package- ...schedule, ensuring timely and effective project delivery.Ensure that project design and delivery comply to all relevant EHS and Engineering and Quality procedures/standards, leveraging the expertise of SMEs to confirm compliance throughout the project lifecycle.Responsible...Full timeFor contractorsLocal areaWorldwideFlexible hours
- ...jobexists/what it must achieve) Ensure that the GSK Zebulon - Building Management System (BMS) Replacement Project commissioning /... .../validation criteria and assure compliance. Collaborate with Engineering on the developmentof Installation and Operational Qualification...Work experience placementLocal areaImmediate start
- ...environment? Join our team as a Critical Environment Operations Engineer and become the guardian of vital business operations. You'll... ...maintain HVAC, CRAC, electrical, and plumbing systems Master building automation, fire/life safety, and related equipment Conduct...Daily paidFull timeApprenticeshipWork at officeLocal area
$52.84k - $90.58k
...Manufacturing Engineering TechnicianWe are looking for a Manufacturing Engineering Technician. This position will be based in Wendell, NC.The Manufacturing Engineering Technician is responsible for manufacturing capability, continuity, and continuous improvement at the...Local area- ...collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives.... ..., productivity tracking, and budget updates.Work with engineering on the specification and pricing of purchased equipment to ensure...For contractorsFor subcontractorWork at office
$91.46k - $156.79k
...Project Engineer – Greentech PV SolutionsHere at Siemens, we take pride in enabling sustainable progress through technology. We do this... ...-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced healthcare...Contract workLocal areaImmediate startRemote workRelocation package- Manage all phases of healthcare construction projects, including planning, scheduling, budgeting, and execution Coordinate daily activities with subcontractors, vendors, and internal teams to maintain project timelines and productivity Develop and maintain project schedules...For subcontractor
- Eaton’s IS AER FED Aerospace ( Hydraulic Hose & Tubing) division is currently seeking a Sr. Manufacturing Engineer.The expected annual salary range for this role is $86000 - $ 120,000 a year. Please note the salary information shown above is a general guideline only. Salaries...Permanent employmentH1bLocal areaRelocation package
- MSS Solutions LLC in Raleigh, NC is seeking an Assistant Project Engineer Design and Development to contribute to customer facilities... ...This on-site position offers growth opportunities and exposure to a diverse set of building systems #J-18808-Ljbffr MSS Solutions, LLC
- ...and extended team of Automation, Instrumentation, IT, Control engineers, external contractors and consultants. To successfully deliver... ...control systems for new and existing pharmaceutical facilities, Building Management Systems and Environmental Monitoring Systems at...Full timeFor contractorsLocal areaRemote work
- ...Position Description About Us At Barringer Construction, we build more than buildings we build relationships, careers, and an... ...and develop Project Managers, Assistant PMs, and Project Engineers growing the next generation of Barringer leaders. # Anticipate...Temporary workFor contractorsFor subcontractorWork at officeLocal areaFlexible hoursWeekend workAfternoon shiftEarly shift
- Company DescriptionArtech is the 10th Largest IT Staffing Company in the US, according to Staffing Industry Analysts' 2012 annual report. Artech provides technical expertise to fill gaps in clients' immediate skill-sets availability, deliver emerging technology skill-sets...Immediate start
- Project Engineer - Design and Development MSS Solutions, LLC currently has an opening available for a Project Engineer - Design and Development... ...with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives. The...Temporary workWork at officeTrial periodFlexible hours
- ...Manufacturing EngineerOur client is seeking a Manufacturing Engineer to join their team. This position is responsible for improving manufacturability... ...helps people gain experience with leading organizations, build sought-after skills and take the next step toward a brighter...Work at office
- ...Manufacturing EngineerBaker Thermal Solutions is seeking a highly capable Manufacturing Engineer to serve as the critical link between Engineering and Operations. This position is responsible for improving manufacturability, establishing efficient production processes...Work at office
$83.97k - $143.94k
...AmericaSalary: $83,966 - $143,942Company: Siemens Industrial Engineering & Digital Operations Excellence Manager Job ID 518746... ...Wendell, NC.Reporting to the PACS Plant Manager, this leader will build and lead the Industrial Engineering / OpEx capability for a greenfield...Permanent employmentFull timeWork at officeLocal areaImmediate startRemote workRelocation packageFlexible hours- ...employment strategy for professional development, and a rewards program to celebrate employee dedication. About the Role The Design Engineer plays a critical role in supporting the manufacturing process by creating working designs of custom equipment while considering...Full time
- ...Transform the everyday with us! We are seeking a Digital Engineering Architect to define the vision, architecture, and technology strategy... ...actionable manner for business and technical stakeholders. Build alignment across teams and influence decisions without direct...Permanent employmentRemote work
$109.74k - $188.13k
...from R&D and product development through equipment and automation engineering, supplier engagement, equipment purchase, installation, commissioning, material procurement, SAP and other systems setup, building construction coordination, production launch, materials...Permanent employmentFull timeContract workWork at officeLocal areaImmediate startWork from homeRelocationRelocation packageShift work- ...Job Description Day to Day: We are seeking a highly experienced Substation Engineering & Construction Manager to lead the full lifecycle of high- and medium-voltage substation projects. This individual contributor role requires deep technical expertise—particularly...For contractors
- Manufacturing / Engineering / Aerospace industry Job Description Job Title : Engineer I | Pay rate: $35/hr on W2 Location : Middlesex|NC|8171 Planer Mill Rd|Nash|27557 Duration : 3 months contract (On-Site) with possibility of extension. Candidate to make $35/hr. 8-...Contract work
- ...team members and stakeholders in a timely and clear fashion.Lead and drive multi-disciplinary and cross functional teams, including engineering, operations, vendor management, logistics and services to ensure successful project execution.Provide regular updates to team,...Permanent employmentContract workWork experience placementInternshipWork at office
- ...MSS Solutions, LLC has an opening for an Assistant Project Engineer – Design and Development in our Raleigh, NC office . If you... ...collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives....Temporary workWork at officeTrial periodFlexible hours
- Sunrock in North Carolina seeks a Project Manager to lead the full lifecycle of heavy civil construction projects, from estimating and planning to execution and closeout. You will work closely with general superintendents, subcontractors, vendors, and clients to deliver...For subcontractorWork at office
- .... We are seeking qualified candidates to join our Design Engineering Summer – Fall Co-op beginning in May 2027. This position will... ...resource-efficient factories, resilient supply chains, and smarter buildings and grids, to sustainable transportation as well as advanced...Permanent employmentFull timeSummer workInternshipWork at officeImmediate startRelocation package
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Building Engineer. Be the first to apply!



