Heavy Mobile Equipment Mechanic
Army Tank-Automotive and Armaments Command
Summary About the Position: The Anniston Army Depot is located in Anniston, Alabama in the foothills of the Appalachian Mountain chain halfway between Atlanta, GA and Birmingham, AL just off Interstate 20. The Depot is the largest employer in Calhoun County with approximately 4000 employees. Learn more about this agency Duties Help
- Rebuild major vehicle systems such as AVDS-1790 series and Detroit V6/V8 engines, XT-1410 Cross-Drive, CD-850 Series Cross-Drive, and XTG-411 transmissions, as well as fuel and electrical systems, restoring all components to full operating condition.
- Connect transmissions to engines, form power packs, and perform system tests.
- Repair external components of the power pack assembly by identifying faults and restoring affected parts to proper function.
- Build the power packs and check that they work correctly under the required conditions.
- Handle hazardous materials and waste by following established safety procedures to prevent spills, contamination, and unsafe conditions in the work area.
- Overhaul combat vehicle fuel/electrical assemblies, components, and subsystems such as regulators, starters, injectors, pumps, and heaters.
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- This position requires the completion of a pre-employment Physical Examination and an annual examination thereafter.
- This position has a requirement to lift up to 45 lbs. in the regular performance of duties.
- Current Department of Army Civilian Employees
- Interagency Career Transition Assistance Plan
- Land Management Workforce Flexibility Act
- Military Spouses, under Executive Order (E.O.) 13473
- Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
- Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
- Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
- Priority Placement Program, DoD Retained Grade Preference Eligible
- Veterans Employment Opportunity Act (VEOA) of 1998
- Ability To Do The Work Of The Position Without More Than Normal Supervision
- Ability to Interpret Instructions, Specification, etc. (includes blueprint reading)
- Ability To Use and Maintain Tools and Equipment
- Knowledge of Equipment Assembly, Installation, Repair, etc.
- Technical Practices (Theoretical, Precise, Artistic)
- Troubleshooting
- Use of Measuring Instruments
- Physical Effort: Work involves standing, bending, reaching, stretching, crouching and working in tiring and uncomfortable positions. Frequently lifts items weighing 15-25 pounds and occasionally in excess of 45 pounds.
- Working Conditions: Work is performed in shop that is moderately lighted, heated, and ventilated; is exposed to disagreeable fumes and to cuts and bruises from using tools in close places and hazards of moving vehicles such as forklifts and sweepers in shop area. Since exposure to hazardous materials/waste is possible, wears protective clothing and equipment (e.g., rubber boots, coveralls, goggles, aprons, gloves, respirator, etc.) as situations warrant.
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
- Direct deposit of pay is required.
- This is a(n) Material Maintenance Management Career Program position aligned under the Logistics Career Management Directorate. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- Multiple positions may be filled from this announcement.
- Hourly wage includes applicable locality pay or Local Market Supplement.
- Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
- Recruitment and Relocation Incentives may be authorized according to agency policies.
Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the Heavy Mobile Equipment Mechanic in Anniston, AL vacancy
- Duties Help Rebuild major vehicle systems such as AVDS-1790 series and Detroit V6/V8 engines, XT-1410 Cross-Drive, CD-850 Series Cross-Drive, and XTG-411 transmissions, as well as fuel and electrical systems, restoring all components to full operating condition. ...Suggested
- About The Position The Anniston Army Depot is located in Anniston, Alabama in the foothills of the Appalachian Mountain chain halfway between Atlanta, GA and Birmingham, AL just off Interstate 20. The Depot is the largest employer in Calhoun County with approximately...Suggested
- About The PositionThe Anniston Army Depot is located in Anniston, Alabama in the foothills of the Appalachian Mountain chain halfway between Atlanta, GA and Birmingham, AL just off Interstate 20. The Depot is the largest employer in Calhoun County with approximately 40...Suggested
- About The Position This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service. This is a Military Technician position with the...Suggested
- ...DescriptionHelpTroubleshoot, repair, modify and maintain a variety of construction, industrial, combat, tactical and power generation equipment.Repair and replace components of the cooling, braking, exhaust, power train, or hydraulic systems on combat and tactical,...Suggested
$20 per hour
...Maintenance Millwright Responsible for installing, maintaining, troubleshooting, and repairing industrial machinery and mechanical equipment to ensure safe, efficient, and reliable operation. Company Profile Manufacturing Textile Plant: manufactures high-quality...Weekly payFull timeTemporary workMonday to ThursdayShift workAfternoon shift$30.54 per hour
..., AL Tyler Union is growing, and we’re looking for skilled Mechanical Millwrights to join our team! If you want competitive pay, strong... ...between moving and stationary parts. Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers,...Hourly payTemporary workFor contractorsLocal areaAfternoon shift$20 per hour
.... Pay: $20.00 per hour Job Summary: The purpose of this position is to perform preventative maintenance, install machinery and equipment in industrial establishment. Key Responsibilities: Start up boiler, blow down once daily, and check press and water levels...Hourly payFull time- Job Title: Information Technology Professional (IT/CTN/IS) Category / Component: Enlisted Both Overview Information Systems Technicians, Cryptologic Technician Networks, and Intelligence Specialists keep the Fleet connected, informed, and secure by operating and...ApprenticeshipWorldwideShift work
- ...manufacturing environments. Install, configure, repair, and maintain Windows-based workstations, printers, scanners, and associated IT equipment. Support specialized production-floor technologies, including barcode scanning devices, label printers, and connected...Work at office
- Job Description Job Description IT Support Specialist /Break Fix - Part Time Employment Type: Part Time (W-2) Hours: 16 hours per Week Location: Anniston, AL (On-Site) In this position, you will be responsible for handling circuits to the end user and supporting...Extra income16 hoursPart timeRemote workFlexible hours
- ..., and related technology resources. This position is responsible for troubleshooting technical issues, installing and configuring equipment, supporting end users, and assisting with the day-to-day operation of the company's information technology infrastructure. The ideal...For contractorsWork experience placementWork at officeLocal area
- ...Units in Alexandria, AL is seeking a Surface Maintenance Repairer (T32) to perform limited diagnostics and routine repairs on heavy-duty equipment and vehicles. You will assist in overhaul of major systems, including engines, transmissions, hydraulics, and driveline...
- ...years verifiable field experience in I.T./Telecom Required Equipment & Qualifications Reliable personal vehicle (Public... ...testers, crimpers). Laptop with Ethernet port Smartphone with mobile hotspot Ability to accept job assignments based on your availability...Hourly payFor contractorsImmediate startFlexible hours
- ...Fiber optic splicing using fusion and mechanical splicing techniques - (Select techs who... ...meters, light sources, fiber certification equipment, and visual fault locators Understanding... ...documentation Smartphone with mobile hotspot Ability to safely handle and...Hourly payFull timeFor contractorsFlexible hours
$45k
...applications. Supports development and implementation of new Information System projects. Engages with third-party support, PC equipment, and software vendors about their software functionality. Installs new computer workstations in campus computer labs,...Full timeMonday to FridayFlexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Heavy Mobile Equipment Mechanic. Be the first to apply!



