Electrical, Instrumentation and Controls Technician
$108k - $135kPhoenix Global
Job Description
Job Description
POSITION/JOB TITLE: Electrical, Instrumentation and Controls Technician
DEPARTMENT: Engineering
DIRECT SUPERVISOR: Senior Manager of Electrical, Instrumentation and Controls
LOCATION: Indiana Lake Front Locations (East Chicago Facilities – Indiana Harbor Facilities, Lake Terminal and Burns Harbor)
TRAVEL: 75% to 80% frequent domestic travel to existing SunCoke/Phoenix sites and prospective sites, with some extended stays possible.
International travel, if required based on business need.
POSITION OVERVIEW:
Phoenix Global is seeking an Electrical, Instrumentation, and Controls (EI&C) Technician responsible for installing, calibrating, maintaining, and troubleshooting complex plant automation systems, field instrumentation, and power distribution networks to ensure optimal operational reliability. This role prioritizes rigorous preventative maintenance and maintains rigorous safety and environmental compliance across facilities. The ideal candidate will safely minimize production downtime while driving continuous technical improvements in a heavy industrial environment.
KEY RESPONSIBLITES:
Safety & Compliance
- Foster a safe work environment by promoting and adherence to safety protocols, identifying environmental risks, and proactively correcting unsafe behaviors or conditions.
- Ensure all operational and automated processes strictly comply with regulatory, environmental, and corporate safety standards.
Troubleshooting
- Maintain Complex Architecture: Troubleshoot and maintain Distributed Control Systems (DCS) (Experion, Ovation, ABB, Foxboro) and Programmable Logic Controllers (PLC) using software environments like RSLogix, Studio 5000, and EcoStruxure.
- Optimize HMI Systems: Oversee Human Machine Interface (HMI) stability and configuration across platforms including Aveva, RSView, Citect, Vijeo Designer, and Operator Control Expert.
- Provide hands-on hardware and software technical support for industrial workstation computers and auxiliary IT equipment across all SunCoke facilities.
E&I Field Maintenance & Calibration
- Install, calibrate, test, diagnose, and repair critical process instrumentation (pressure, temperature, level, flow) and heavy conveyor equipment (speed/tilt switches, pull chords, VFDs).
- Manage the routine inspection, calibration, and predictive maintenance schedules for field instruments to minimize unexpected production downtime and verify measurement accuracy.
- Seamlessly integrate newly deployed instruments into existing process control systems, preserving full structural loop integrity.
- Keep accurate records of all field activities, preserving historical logs for PM cycles, instrumentation calibrations, and formal certificates of completion.
Power Distribution & Plant Optimization
- Provide safe, technical assistance and physical support for low, medium, and high-voltage power distribution networks.
- Partner with cross-functional engineering, production, and maintenance leaders to design, prioritize, and execute efficiency changes that maximize overall plant throughput.
Engineering Collaboration
- Participate in the full lifecycle development of new industrial systems, directly contributing to early design, system installation, commissioning, and final operator training.
- Research, select, and manage third-party vendors and contractors to guarantee external equipment fabrication, installation, and field commissioning meet precise site expectations.
- Foster productive working relationships across teams collaborating daily with multi-facility EI&C engineers, area managers, and hourly craft workers.
BUSINESS/TECHNICAL SKILLS:
- In-depth knowledge of OSHA, ISA, and NEC standards (MSHA required at OH Industrial Services locations).
- Proficient with Rockwell Automation Programming and SCADA-based HMI software.
- Deep understanding of Historian, OPC (Open Platform Communication) servers, and Variable Frequency Drive (VFD) systems.
- Ability to interpret and create or modify complex electrical schematics using AutoCAD.
- Strong understanding of industrial controls, scheduling, risk analysis, constructability reviews, construction, and system start-up.
- Exceptional written and verbal skills to translate technical data into clear business reports.
- Advanced user of MS Office (Word, Excel, PowerPoint) and MS Project.
EDUCATION REQUIREMENTS / WORK EXPERIENCE:
- Industrial Electrician or Technical Graduate with 2- or 4-year bachelor’s degree.
- Minimum 7 years hands-on experience in related heavy industrial, manufacturing plant environment with progressive responsibility.
WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
- Exposure to wet or humid conditions, moving mechanical parts, fumes, airborne particles, and varying outdoor weather conditions.
- Occasional work in high or precarious places, tight confined spaces, extreme heat, risk of electrical shock, and equipment vibration
- Typically moderate, but high-noise areas require mandatory hearing protection.
- Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
- Regularly lifts or moves up to 10 pounds, frequently lifts or moves up to 25 pounds, and occasionally lifts or moves up to 50 pounds.
- Regularly stands, walks, reaches, and uses hands to handle or feel. Frequently climbs, balances, stoops, kneels, crouches, or crawls.
- Requires close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.
- Must hear and speak clearly to ensure workplace safety, including communicating via two-way radios.
OTHER REQUIREMENTS:
- Willing and able to travel extensively across North America and internationally, including staying for extended periods at domestic or overseas job sites.
- Ability to live and work in the United States (US citizen, Permanent Resident, valid work visa or equivalent)
- Ability to work effectively both as an independent and as a team member in field environments
COMPENSATION AND BENEFITS:
The pay range for this position is $108,000 - $135,000. Actual compensation will be determined based on relevant experience, qualifications, skills, and internal equity.
Annual performance bonus target 10%.
In addition to competitive pay, we offer a comprehensive benefits package for employees and their families. This includes health care coverage (medical, dental, and vision), a 401(k)-retirement plan, life and disability insurance, paid time off, and paid company holidays.
We also provide a variety of supplemental programs designed to support overall wellbeing and everyday needs, such as optional life insurance for eligible family members, supplemental disability coverage, legal services, identity protection, critical illness, hospital and accident insurance, tuition reimbursement, chronic condition support programs, a 24/7 employee assistance program, and telemedicine services.
This document in no way states nor implies that these are the only responsibilities of, and the duties to be performed by, the employee occupying this position.
- ...Controls Technician For Service & Construction AWS Infrastructure Services owns the design... ...Building Management Systems (BMS) and Electrical Power Monitoring System (EPMS) within... ..., troubleshooting and maintenance of instrumentation associated with the BMS and EPMS in data...ElectricalFor contractorsShift work
$36.78 - $47.03 per hour
...and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and...ElectricalFor contractorsLocal area- ...Maintenance Technician The Maintenance Technician will repair and... ..., conveyor systems, electrical devices, production machines... ...equipment Examine machine controls to install plate changeovers... ...parts of devices and control instruments Inspect used parts to determine...Electrical
- ...Summary The Maintenance Technician is responsible for... ...equipment in accordance with electrical diagrams, sketches, operation... ...tools, precision measuring instruments, or electrical or electronic... ...Electrical wiring, relay logic, control and safety circuits ~...ElectricalShift workAfternoon shift
- ...our clients through IT automation and control solutions for more than 30 years to... ...that site. We are seeking a Electrical Technician, to assemble industrial control panels... ...High School Diploma or GED. Instrumentation controls and 24V low voltage experience...ElectricalPermanent employmentLocal area
- ...Description Job Title: Power Generation Field Service Technician Company: Interstate Power Systems Location:... ...equipment, including generators, engines, and control systems. Diagnose and troubleshoot electrical, mechanical, and electronic issues in generator...ElectricalFull timeFlexible hoursShift work
- ...POSITION SUMMARY: With direct supervision from a Lead Technician, Maintenance Supervisor or Maintenance Manager, a Maintenance... ...to, chassis components, vehicle refuse bodies and control systems, hydraulic electrical, air brake systems, general engine work, HVAC...ElectricalContract workTemporary workLocal areaShift work
- ...Title: Aviation Electronics Technician (AE/AT) Category / Component... ...Overview Aviation Electronics, Electrical and Computer Systems... ...communications, navigation, flight controls, and weapons at sea and... ...test and calibrate aircraft instruments and automatic flight controls...ElectricalTemporary workApprenticeshipWork at officeWorldwideNight shiftRotating shift
- ...Understand proper use of tools and instruments associated with the work. Make measurements... ..., valves, manholes, meters, computer controls, pumps and appurtenances. Wear and... ...is required although mechanical and/or electrical experience is preferred. Valid U.S....ElectricalFor contractorsWork at office
- ...Description Job Title Plant Technician Qualifications... ...Preferred) Programmable Logic Controllers: 3 years (Preferred) Job Summary... ...Measures and tests instruments Observes mechanical devices... ...not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting...ElectricalFull timeLocal areaShift workWeekend work
- ...will prepare you for this high-demand, entry-level role. What does an ECG / EKG Technician do? An ECG / EKG technician conducts diagnostic tests to measure and record the electrical activity of the heart, helping physicians diagnose and monitor cardiac conditions....ElectricalFlexible hours
- ...Electrical Controls Engineer - Chesterton, IN This opportunity is with an established General Contractor that specializes in converting... ...Relay Logic Diagrams Create Bill of materials (BOMs): instrumentation, sensors, actuators, valves and other field devices...ElectricalFor contractorsFor subcontractor
- ...responsibilities include supervising a technician (mechanic) team responsible for preventive... ..., with technician. Conduct Quality Control Inspections, track issues and resolution... ...systems, transmission, brake, hydraulic and electrical systems to perform advanced preventive...ElectricalTemporary work
$18 - $55 per hour
...Graff Auto Campus | Automotive Technicians, Entry-Level to MasterWhether you're just starting out or you're a master technician ready... ...vehicle inspections, maintenance, and repairsDiagnose mechanical, electrical, and drivability concernsComplete work accurately and...ElectricalHourly pay- ...DutiesPerform in the advanced troubleshooting and repair of Mechanical / Electrical / Hydraulic / Pneumatic / Building Maintenance issues in a... ...reach optimum capabilitiesBe the primary support for machine control systems (PLC, HMI, motor controls, relay logic, etc.)Establish...ElectricalShift work
- ...Maintenance Technician - Portage, IN (Evergreen Posting) This is an evergreen posting ,... ...Troubleshooting and repairing mechanical and electrical equipment Performing preventive... ...motors, Yaskawa A/C drives, wiring, and control logic ~ Mechanical experience with hydraulics...ElectricalWork at officeImmediate startAll shiftsShift workNight shiftDay shiftAfternoon shift
- ...Automotive Service TechnicianWe're hiring technicians who take pride in their work and want a shop that invests in them. Graff Toyota... ...equipmentDiagnose, maintain, and repair engines, transmissions, electrical, steering, suspension, brakes, A/C, and moreCommunicate with...Electrical
$100k - $200k
...Ford Technician Graff Auto Campus in Burns Harbor, IN needs a skilled, motivated Ford Technician who can make an immediate impact.... ...equipment Diagnose, maintain, and repair engines, transmissions, electrical, steering, suspension, brakes, A/C, and more Communicate...ElectricalBi-weekly payImmediate startRelocation package$31 - $42 per hour
...Maintenance Technician – Plastic Injection Molding Shift : 3pm-11pm or 7pm-7am ** Pay... ...maintenance, diagnosing mechanical and electrical issues, and minimizing equipment... ...using precision measuring and testing instruments. ~ Strong mechanical aptitude and problem...ElectricalShift work$10,000 per month
...Graff Auto Campus | Chevrolet (GM) Journeyman / Certified Technician Join Graff Auto Campus in Burns Harbor, IN, and deliver top-notch... ...advanced diagnostic equipment to troubleshoot mechanical and electrical issues Make sure all repairs meet quality and safety...Electrical$100k - $200k
...Toyota Technician Graff Auto Campus in Burns Harbor, IN is looking for a skilled, motivated Toyota Technician. You'll get top pay for... ...guidelines Diagnose and troubleshoot mechanical and electrical issues accurately Test-drive vehicles and use specialized tools...ElectricalBi-weekly payRelocation package- ...experience as a Multi Craft Maintenance Technician makes you a perfect fit to join our... ...equipment and facilities are kept in good electrical/mechanical repair and working order, enabling... ...drawings. Troubleshoot programmable controllers, electronics, circuit analysis,...ElectricalShift workNight shiftWeekend workDay shift3 days per week
$18.5 per hour
...What You Get To Do: The Maintenance Technician's primary responsibility is to ensure that... ...ensure an organized, responsible, and controlled manner of acquiring and maintaining all... ...including heating, plumbing, electrical, and general repair. Must possess ability...ElectricalFull timeMonday to FridayFlexible hoursWeekend workAfternoon shift$62.4k - $83.2k
Maintenance Technician (Mechanical/Electrical Packaging Equipment)This role is a hands-on Maintenance Technician position with approximately 70% mechanical... ...Frequency Drives (VFDs).Troubleshoot programmable logic controllers (PLCs), focusing on inputs and outputs to identify and...ElectricalPermanent employmentMonday to FridayShift workNight shiftAfternoon shift$30 - $35 per hour
...Valparaiso—where innovation, community, and quality thrive! The Maintenance Technician installs, repairs, and maintains machinery and mechanical and electrical equipment such as electrical controls, electrical/servo motors, pneumatic, hydraulic, robotic, and Programmable...ElectricalShift work$31.51 - $39.12 per hour
...on our team.We are seeking a Maintenance Technician to help keep our production equipment,... ...repair, maintain, and improve mechanical, electrical, plumbing, fabrication, and building... ...hydraulic, pneumatic, and programmable control systems.Maintain and repair boilers, compressors...ElectricalImmediate startWorldwideShift workNight shift- ...childbearing and parenting leave Maintenance Technician 3rd Shift Position Summary The... ...requires developing technical skills in electrical, mechanical, hydraulic, and pneumatic... ...Trace and diagnose basic electrical control circuits. Perform maintenance on...ElectricalNight shiftWeekend work
- ...differential Job Summary: The Maintenance Technician performs highly diversified duties including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting... ...3 Phase electrical, three-phase motor control • Troubleshoot AC & DC drives. Work...ElectricalFull timeWork at officeMonday to FridayFlexible hoursShift workNight shiftWeekend workAfternoon shift
- ...looking to start your career as a Diesel Technician, or are an experienced industry veteran... ...arms, and fifth wheels. Performs electrical system diagnostics and repairs, including... ..., evaporators, condensers, and HVAC controls. Maintains cleanliness and organization...ElectricalTemporary workNight shiftWeekend work
- ...What You'll Do: As a Maintenance Technician at our Service Center, you'll play a key... ...experience working with mechanical and electrical equipment. Basic computer proficiency... ...motors, Yaskawa A/C drives, wiring, and control logic. Solid understanding of industrial...ElectricalFull timeTemporary workWork at officeMonday to FridayFlexible hoursDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electrical, Instrumentation and Controls Technician. Be the first to apply!
- electrical qualifier Chesterton, IN
- electrical Chesterton, IN
- electrical controls Chesterton, IN
- automotive electrical Chesterton, IN
- technician electrical Chesterton, IN
- electrical engineer technician
- electrical equipment technician
- electrical systems technician
- entry level electrical engineering technician
- electrical metering technician


