Silk Screen Operator - 2nd shift
EUROPTEC USA LLC
Job Description
Job Description
General Purpose:
Performs heated glass responsibilities as listed below at the direction of management.
NOTE: Wearing personal protective equipment as defined in the work instructions for each task is mandatory.
Essential Functions:
Insulation Function
- Operates circular saw to cut aluminum extrusion
- Assembles corner keys and aluminum extrusion to make spacers/frames
- Keeps production records
- Inspects the glass and stacks spacers/frames
- Operates the sealant pump to seal IG units
- Uses razor blade to cut apart sealed units that have been stacked one on top of the other
- Operates caliper to measure units and records measurements
- Inspects/packs units in a wooden crate
- Works with Production Supervisor to resolve problems in the area
- Maintain cleanliness of work cell
Lamination Function
- Inspects glass and raw materials to be laminated
- Uses hand tools (e.g. razor knife, rolling pin, scissors, etc)
- Stacks and aligns glass and laminating materials and puts in the laminating oven
- Reads process parameter sheets to understand how to run oven based on materials being used
- Understands room and environmental requirements for effective lamination
- Operates oven accordingly
- Removes and inspects finished product
Silk Screen Function
- Operates squeegee sharpener to ensure good sharp edge
- Inspects and prepares screen
- Uses hand tools (e.g. drill with attachments, Allen wrenches, etc.) as necessary
- Reads blueprints
- Inspects materials as it goes into the process and comes out of the process
- Makes adjustments to screen and machine to ensure that the glass meets the specifications on the blueprints
- Understands how to effectively operate the machine
- Operates the drying oven effectively by adjusting temperature and speed
- Cleans, tapes, and moves screen as necessary
- Identifies defects or problems with the machinery and reports them as necessary
Soldering
- Reads and understands blueprints
- Uses hand tools (e.g. caliper, crimpers, soldering iron, fingers that set the wires in place)
- Understands the difference between different soldering materials
- Sets up charcoal filter fan next to soldering area to remove fumes
- Tests the quality of the soldering by performing the pull test with a force gage
- Records production and test data
Copper Buss Bar
- Reads and understands blueprints
- Follows work instructions to ensure that machine is set up properly
- Uses hand tools as appropriate to make adjustments
- Performs tests (soldering/pull test, resistance test) to ensure conformance to internal standards
- Performs maintenance on equipment as necessary
Heated Glass Assembly
- Gather components for assembly
- Inspects components to ensure they meet the required quality
- Follows instructions to assemble components
- Tests finished product to ensure proper performance (including using thermal imaging camera and/or hi-pot testing)
- Records test results for towel warmers
- Prints serial number labels for traceability and puts labels on product and package
- Follows instructions for proper packaging
Edge Deletion and Logo/Tape
- Reads and understands blueprints
- Follows work instructions to ensure that machine is set up properly
- Performs tests periodically to ensure that glass meets aesthetic and functional requirements
- Uses hand tools to perform quality tests (e.g. caliper, 4-point probe)
- Does all other duties as assigned
Qualifications/Basic Job Requirements:
- Must have good attention to detail to ensure that glass produced is in accordance with specifications
- An individual is considered qualified upon notification by the PS or department head to the DHR that the employee has successfully completed the training and is qualified to perform the position. Notation of this notification is made in the employee’s training record.
- Completion of primary school education with six months of experience or related training and six months experience. High school diploma or GED strongly desired. Trade school certification helpful.
- Must have basic understanding of how to handle paints, sealants, and solvents in accordance with work instructions
- Must have strong understanding of safety and environmental procedures associated with this job
- Ability to read and interpret blueprints
- Ability to understand work instructions and communicate problems to the Production Supervisor
- Ability to collect production data to complete required forms
- Ability to perform elementary mathematical operations; familiarity with measuring units and measuring instruments (i.e. conversion of pounds to kilograms and gallons to liters)
- For a list of mandatory training for this position, please see the Training Plan at QS PR 6.2.2.2 Training Plan
Physical Requirements:
These are physical and mental requirements of the position as it is typically performed. Inability to meet one or more of these physical requirements will not automatically disqualify a candidate or employee from the position. Upon request for a reasonable accommodation, the Company may be able to adjust or excuse one or more of these requirements, depending on the requirement, the essential functions to which it relates, and the proposed accommodation.X Seeing X Ability to Move Distances X Lifting (specify)
X Color Perception (Red, Green, Amber) Within and Between 55 Pounds
X Hearing/Listening Warehouse/Offices X Carrying (specify)
X Touching X Climbing 55 Pounds
X Dexterity X Ability to Mount and Other
X Hand Dismount Forklift/Truck
X Finger X Pushing/Pulling
Mental/Reasoning Requirements:
X Reading – Simple Writing – Complex X Analysis/Comprehension
Reading – Complex Clerical X Judgment/Decision-making
X Writing – Simple X Basic Math Skills
Work Environment:
X Shift Work Outside X Pressurized Equipment
X Works Alone X Extreme Heat X Moving Objects
X Works with Others X Noise High Places
X Verbal Contact w/ Others X Mechanical Equipment X Fumes/Odors
X Face-to-Face Contact X Electrical Equipment X Hazardous Materials
X Inside X Dirt/Dust
Disclaimer:
The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and/or skills required of all personnel so classified.
4:15pm - 2:45am; Monday - Thursday, with Fridays or Saturdays possible
OT is mandatory.
$26 - $29 per hour
...skilled CNC Machinist to set up and operate CNC mills or lathes for short runs,... .... Openings are available on the 1st shift (7:00 am - 3:00 pm) and 2nd shift (3:00 pm - 11:00 pm), with a 1... ...hiring process, including sourcing, screening, and evaluating candidates. AI helps...Afternoon shiftWeekly payContract workTemporary workShift workDay shift$40 per hour
...~40hr and 166 per diem all 7 days ~2nd and 3rd shifts ~ Start 11/30 and 12/7 ~ Project located... ...Description This role focuses on operating, setting up, and troubleshooting a... ...our hiring process, including sourcing, screening, and evaluating candidates. AI helps...Afternoon shiftWeekly payDaily paidContract workTemporary workSummer workShift workNight shift$18 - $19 per hour
...Job Description Job Description Mold Operator - 1st & 2nd Shift Chicago, IL Area Looking to start a career in manufacturing? We are hiring... ...support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications...Afternoon shiftWeekly payPermanent employmentTemporary workShift workDay shiftEarly shift$51.5k - $61.67k
...CNC Cell Machinist Setup & Operator (Mori Seiki & Doosan) Location: Hillside, IL Shift Options: ~1st Shift: 6:00 AM 2:30 PM | Monday Friday ~2nd Shift: 2:00 PM 10:30 PM | Monday Friday... ...process, including sourcing, screening, and evaluating candidates. AI helps...Afternoon shiftHourly payWeekly payPermanent employmentFull timeImmediate startMonday to FridayAll shiftsShift workNight shiftDay shift$15.75 - $18.38 per hour
...Production Associate - Garment Hanger/Inspector - 2nd Shift Location: Bedford Park, IL, US, 60638 Requisition Number: 234129 Cintas... ...will also be required to complete a background check and drug screen. Having a criminal history does not automatically disqualify candidates...Afternoon shiftHourly payFull timeLocal areaShift work- ...Description Kett Engineering is working with a major EV manufacturer, and we are hiring multiple Autonomous Systems Validation Operators on 1st and 2nd shift in Chicago, IL. This is an extended data collection and validation project and excellent opportunity to engage with...Afternoon shiftShift workWeekend workDay shift
- ...Location: Cicero, IL 60804, USA Job Type: Full-Time Shift: 2nd shift Experience: 3+ years of manual turning or comparable... ...years. This role is for a genuine manual machinist—not a CNC operator mislabeled as one. You will perform close-tolerance turning, facing...Afternoon shiftHourly payFull timeTemporary workMonday to FridayShift work
$38.65 per hour
...Experienced machinists can earn up to $38.65 per hour Job Type: Full-Time Shift: Primarily 2nd shift; 3:00 PM–1:00 AM or 5:00 PM–5:00 AM, Monday–Friday Experience: CNC setup, operation and at-the-machine programming Machines: DMG Mori 5-axis mills, Mazak...Afternoon shiftHourly payLong term contractFull timeTemporary workMonday to FridayShift work$20 per hour
.../hr | Entry-Level Opportunities | 1st, 2nd & 3rd Shift Available Looking to get your foot in... ...to support mixing, packaging, machine operation, and quality processes in a clean, temperature... ...hiring process, including sourcing, screening, and evaluating candidates. AI helps...Afternoon shiftWeekly payContract workTemporary workAll shiftsShift workNight shiftDay shift$25 - $28 per hour
...dynamic role encompasses autonomous vehicle operations, fleet logistics, and field recovery. If... ...Coordinate vehicle batch setups prior to shift arrivals, ensuring the fleet is clean and... ...a pre‑employment background check, drug screen, and physical screening. Transdev...Afternoon shiftFull timeContract workTemporary workWork at officeLocal areaRemote workShift workNight shiftWeekend workEarly shift- ...Job Description Job Description 2nd shift position. Hours 3pm to 1am M-F. Join a growing precision machining company that is... ...planned—and we're looking for an experienced CNC Swiss Set-Up Operator to help support our continued growth. If you enjoy working...Afternoon shiftTemporary workFor contractors
- ...looking for candidates who are available to work first or second shifts. First Shift: 7 am to 3:30 pm Monday through Friday *... ...permanent residents only Must have reliable transportation to and from work Must successfully pass background check and drug screen...Afternoon shiftPermanent employmentFull timeMonday to FridayShift workDay shift
$24 - $28 per hour
...Description Job Description CNC Machinist II and III — Second Shift Location: Harwood Heights, IL Schedule: 4:00 p.m.–12:30 a.... ...experience is preferred. What You’ll Do Set up and operate CNC mills and/or lathes to produce precision components. Read...Afternoon shiftContract work- ...Job Posting: CNC Machinist (1st & 2nd Shift) Location: Harwood Heights, IL | Shifts: 1st & 2nd Shift Available A well-established precision... ...job changers need not apply . What You’ll Do: Set up and operate CNC lathes and mills, specifically Doosan and Haas machines. Run...Afternoon shiftShift workDay shift
- ...Machinist plays a crucial role in the steel manufacturing industry by operating and maintaining various types of machinery. This position... ...and procedures Our Offer ~ Extra $1.00 for working 2nd shift & extra $2.00 for working 3rd shift ~ Medical, Dental, and...Afternoon shiftLocal areaWorldwideNight shift
- ...knowledge in the steel manufacturing industry. Trainees will learn to operate various machining tools and equipment, gaining hands-on... ...work activities We Offer: ~ Extra $1.00 for working 2nd shift & extra $2.00 for working 3rd shift ~ Medical, Dental and Vision...Afternoon shiftTraineeshipFlexible hoursNight shift
- Job Description Job Description Precision Plating Company is an engineering centered company. Founded in 1904, Precision Plating Company (PPC) grew from humble beginnings to a true leader in the field of electrolytic and electroless metal plating finishes. Products...Afternoon shift
- ...is looking for a skilled Mazak CNC Lathe Machinist to set up, operate, and maintain CNC turning centers using Mazak controls (Mazatrol... ...precision parts according to specifications. This is a 1st or 2nd shift position. Key Responsibilities: ~ Set up and operate...Afternoon shiftDay shift
$26 - $40 per hour
...skilled Manual Machinists to join their team on both day and night shifts . This is an excellent opportunity for candidates with strong... ...). Shift & Schedule: ~1st Shift: 6:00 AM - 2:30 PM ~2nd Shift: 2:30 PM - 11:00 PM ~30-minute lunch break and a small...Afternoon shiftContract workImmediate startShift workNight shiftDay shift- ...centers. Extend tool life while meeting production rates. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs simple or repeat set-ups and operates equipment to produce high quality parts (100% good pieces) within prescribed routed time to meet production demands. If standard...Afternoon shift
$16 - $19 per hour
...Description Heavy industry - Foundry Helper Hire type: Full-Time Shift: 2nd & 3rd Shift Pay Range: $16 - $19 /hr We are expanding... ..., or Material Performing General Physical Activities Operating Vehicles, Mechanized Devices, or Equipment Communicating...Afternoon shiftFull timeWork experience placementShift workNight shift- 2nd Shift CNC Machinist Alsip, Illinois, United States About the Job A CNC machinist at our company may work in any of our machining departments... ...Qualifications/Requirements 3+ Years of CNC setup or operation experience on lathes or mills Ability to read and comprehend...Afternoon shiftFlexible hoursNight shift
$25 - $35 per hour
...OperatorLocation: Hillside, ILCompensation: $25-$35/hr + 10% shift differential + OT + comprehensive benefits package includedShift: 2nd and 3rd ShiftAbout Us:We have 2 openings for Lead CNC Set-Up Technician/Operators (2nd and 3rd shift) at our remanufacturing facilities....Afternoon shiftMonday to FridayShift workNight shift$22.25 per hour
...short-term incentive bonus, subject to eligibility criteria.Join Our Team as a Machinist!The Machinist – Basic is responsible for operating a variety of machines, including both CNC and manually-controlled equipment, to produce precision parts for S&C products. The Machinist...Afternoon shiftHourly payTemporary workLocal areaWorldwide$17.5 - $20.5 per hour
...Adecco is seeking skilled Molding Machine Operators to join our client’s team in Wheeling, IL... ...well within a team environment. Shift Options: ~1st Shift: Monday–Saturday, 6... ...0 AM – 2:20 PM (rotating Saturdays) ~2nd Shift: Monday–Saturday, 2:00 PM – 10:20 PM...Afternoon shiftHourly payWeekly payTemporary workLocal areaShift workNight shiftDay shift- ...production setting and following food safety guidelines. Multiple shifts are available with different pay rates depending on schedule.... ...reliable Shifts & Pay ~1st Shift: 7:00 AM 3:00 PM $15/hr ~2nd Shift: 3:00 PM 11:00 PM $16/hr ~3rd Shift: 11:00 PM 7:00 AM $1...Afternoon shiftCurrently hiringShift workNight shiftDay shift
$18 - $19 per hour
...Job Description Job Description Mold Operator Job Description The Mold Operator... ...coverings and footwear. Work scheduled shifts and overtime, including Saturday overtime... ...our hiring process, including sourcing, screening, and evaluating candidates. AI helps...Afternoon shiftWeekly payPermanent employmentContract workTemporary workFor contractorsMonday to FridayMonday to ThursdayShift workDay shift$30.02 - $43.43 per hour
...- Racine, WI | Starting at $30.02/hr up to $43.43/hr (includes 10% shift premium) + $2K Sign On Bonus 2nd Shift: 3:00 PM - 11:00 PM, Monday - Friday What You'll Do Set up and operate CNC machines (lathes, mills, etc.) Read blueprints and perform precision...Afternoon shiftRelocation packageMonday to FridayShift work$17 per hour
...from you! We are looking for a Machine Operator to join the team at our Norridge, IL... ...team! Please note, this is a full-time, 2nd shift position (3:15pm - 11:45pm, Monday - Friday... ...complete and pass a pre-employment drug screen and background check. Powered by...Afternoon shiftFull timeMonday to FridayShift work$24.31 - $36.47 per hour
...CNC Machinist II - 2nd Shift CNC Machinist II is a mid-level position to perform lathe and mill tasks, continue to learn all aspects of CNC operations, the trade and, and, as a part of the Production Team, fill in as needed in other areas in support of manufacturing...Afternoon shiftHourly payLocal areaVisa sponsorshipWork visa
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Silk Screen Operator - 2nd shift. Be the first to apply!



