Field Engineer, Electrical and Instrumentation
Full-time
LAMP
Position Purpose
Owns field execution of power, control and instrument installation, including panels, sensors, cabling and the physical interface to the control system.
Key Responsibilities
- Supervise installation of switchgear, motor control centers, transformers, cable tray, conduit, grounding and lighting.
- Direct instrument installation, including transmitters, control valves, analyzers, level and flow devices, and verify tagging against the instrument index.
- Manage hazardous area classification compliance, including sealing, wiring methods and equipment ratings in classified zones.
- Coordinate DCS and PLC panel installation, marshalling, cable termination and loop check execution.
- Support commissioning of gas detection, fire alarm and emergency shutdown circuits.
- Verify calibration certificates and maintain the instrument calibration register.
- Maintain electrical and instrumentation redlines for the as built set.
Required Qualifications
- Bachelor's degree in electrical engineering or equivalent field experience.
- Five or more years of industrial electrical and instrumentation field engineering.
- Working knowledge of NEC, NFPA 70E and hazardous area classification.
- Loop check and functional test experience.
- OSHA 30.
Preferred Qualifications
- DCS platform experience such as DeltaV, Honeywell, Rockwell or Siemens.
- Arc flash study and coordination experience.
Vacancy posted 29 days ago
Similar jobs that could be interesting for youBased on the Field Engineer, Electrical and Instrumentation in Liberty, Gregg County, TX vacancy
- ...performing all aspects for complete designs of small and large electrical and instrumentation engineering assignments using theoretical knowledge and practical... .... Performing fieldwork necessary to gather field data, check tie-ins and provide construction support....Suggested
- ...architecture, including DCS, PLC, safety instrumented system, historian and network... ...checks and functional testing with the field engineers. Configure and rationalize the alarm... ...Qualifications Bachelor's degree in electrical, control, chemical or computer engineering...Suggested
- ...communities in which we operate.SUMMARYAre you a newly graduated electrical engineering student looking to GROW your career?Graduate Rotational... ...Engineer, Reliability Engineer, Electrical Engineer, Instrumentation Engineer, Continuous Improvement Engineer, or Project...SuggestedRotational programFull timeWork at officeLocal area
- ...spool receipt, fit up, support installation and spring hanger settings. Resolve field routing conflicts, raise technical queries with clear proposed solutions, and drive engineering response. Coordinate ductwork and ventilation installation in volatile and hazardous...SuggestedFull time
- ...equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production... ...listening for problems; using precision measuring and testing instruments. Removes defective parts by dismantling devices; using hoists...SuggestedOdd jobTemporary workFlexible hoursAfternoon shift
$28 - $34 per hour
...Job Summary The Plant Systems Engineer (Gas Power) will support the performance, troubleshooting... ...who understands mechanical and electrical systems, monitors plant performance,... ..., electrical controls, and plant instrumentation ~ Ability to read and interpret schematics...Hourly pay- ...the nation's premier environmental and engineering services consulting firm. This powerhouse... ...is seeking an experienced Field Technician who desires a challenging career... ...Maintains and operates field equipment/instrumentation as needed in accordance with specified...Night shift
- ...Anticipate and address project related general, technical, and engineering issues. Monitor and control the expediting of materials... ...Knowledge of installation, alteration, addition, and/or repair of electricity and electrical systems, conductors, and equipment within the...Work at office
- ...machinery, including sheet metal machines, engines, pneumatic tools, and conveyor systems.... ..., and precision measuring and testing instruments. Demonstrate effective communication... ...computer and diagnostics software for electrical and automation problem diagnosis. Aligns...Work at office
- ...Electrical Engineer I The Electrical Engineer I at AAON is an entry-level position responsible for supporting the design, testing, and documentation... ...a Bachelor's degree in Electrical Engineering or a related field Preferred: Internship or co-op experience in a...InternshipWork at office
$19 - $20 per hour
Job Opportunity at DatamaxDatamax is looking for motivated, hands-on individuals who are ready to start a career working with today's latest office technology. No extensive experience? No problem—we provide the training, tools, and support you need to succeed.If you're...Work at officeImmediate startMonday to Friday- ...Senior Field Service Technician (AMS)The Sr. Field Service Technician is responsible for... ...installing, and commissioning both gas-fired and electric-driven compressor packages. The objective... ...independently and efficiently diagnose engine and compressor failures.Provide input to...Full timeWork at officeLocal areaWorldwide
- ...ensuring compliance with safety practices and quality standards. Candidates must have at least 5 years of experience with industrial engines, advanced troubleshooting skills, and a valid driver's license. Responsibilities include leading teams, performing preventative...
- ...proper personal protection equipment for each assigned task and willing to exercise “Stop Work Authority” if and when necessary. Minimal field experience but able to perform required tasks without direct supervision. Basic understanding of each job being performed, take...Local areaShift workNight shiftWeekend workDay shift
- ...Field Service TechnicianPerforms multiple tasks associated with field installation, service, maintenance, troubleshoot and repair of surface wellhead systems.Essential FunctionsField Service, assembly, and repair of new, reman and customer property.Plans and coordinates...Work from homeShift workNight shift
- ...assemble pumps and the transacting of other products specific to the pump shop.Properly handle sucker rods and application of general oil field supply products and safety systems equipment.Delivers and picks up customer pumps which have been or are in need of repair.Assist in...
- ...Field Service TechnicianBishop Lifting Products, Inc. is the most trusted name in the... ...and repairing mechanical issues on diesel engines, overhead cranes, hoists, and elevators.... ...:Must possess the ability to read electrical schematics and troubleshoot 460 vac 3 phase...Immediate start
$31.75 - $40.63 per hour
...imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing...- ...machinery and mechanical equipment such as engines, motors, pneumatic tools, conveyor... ...all plant equipment. Ability to perform electrical, PLC and robotic troubleshooting, installation... ...for all electrical controls and instrumentation. Adheres to the plant preventative maintenance...Hourly payFull time
- Comfort Systems USA is looking for a skilled Project Manager to lead large‑scale electrical construction projects across the United States. You will manage projects valued between $30M-$50M+, ensuring top-quality performance and client satisfaction. The ideal candidate...
- ...Service Technician to join our team. If you're passionate about providing exceptional service and have experience in appliance repair, electrical, plumbing, and carpentry, we want to hear from you!Job Description: As a Service Technician, you will be responsible for the...
$17 per hour
Southern Star Technician Training/Base pay rate of $17.00 per hour. The base rate increases by.50 upon sixty days of employment. We have a guaranteed hourly rate of $20.00 per hour upon completion of training through your first 9 months. This allows time to build your...Base plus commissionHourly payDaily paid2 days per week- ...Engine Shop Service TechnicianThis Engine Shop Service Technician position is responsible for performing inspections, diagnoses, and repairs... .../skills. A Level III Technician has moderate knowledge of the field's standard and technical concepts, practices, and procedures....Monday to Friday
- ...company guidelinesAdditional Information :Physical Demand : Lift 50 lbs. unassistedWorking Conditions : Shop environment with occasional field work; Requires working in hot (above 90 F degrees) or cold (below 32 F degrees) temperatures; includes exposure to sounds and noise...Casual workMonday to Friday
- ...our dynamic service team. In this role, you will independently diagnose, service, and repair a wide range of RV systems including electrical, plumbing, HVAC, appliances, and chassis components. Your technical expertise and attention to detail will play a key role in...Part timeLocal area
- ...diagnose compressor issues. Attention to detail and ability to keep accurate records. Excellent problem-solving skills. Ability to work independently and remotely. Experience in the energy sector is a plus. Technical degree or certification in a relevant field is preferred.Full timeLive inRemote work
- ...least 1 year of I.T. or Telecom experience, and one of the following: A+ Certification Network+ Certification OR 5+ years verifiable field experience in I.T./Telecom Required Equipment & Qualifications Reliable personal vehicle (public transportation not accepted) Valid...Hourly payFor contractorsFlexible hours
- Roadside Service TechnicianRespond to roadside and on-site service calls using a fully equipped service truck.Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial.Diagnose and repair tire-related issues...
$12 - $16 per hour
Midas General Service Technician At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We...Hourly pay- ...and trailers, including: Commercial Tires HVAC systems Brakes Steering & Suspension PM Inspections Drivetrain Electrical Systems Conduct fleet inspections and routine maintenance. Operate company vehicles safely and in compliance with all...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Field Engineer, Electrical and Instrumentation. Be the first to apply!
Related searches
- field work Liberty, Gregg County, TX
- vice president of field operations Liberty, Gregg County, TX
- field Liberty, Gregg County, TX
- field medic Liberty, Gregg County, TX
- electrical controls Liberty, Gregg County, TX
- electrical Liberty, Gregg County, TX
- IT professional services engineer
- junior field engineer
- field applications engineer
- diesel engine service engineer


