E-Coat / Paint Process Engineering Specialist
$94k - $117kLHi Group Ltd
$94,000-$117,000 base salary On-site - Hopkinsville, KY Relocation assistance available I'm currently supporting a leading automotive manufacturer on a search for a Senior Production Engineer Specialist to take ownership of its E-Coat / electrodeposition (ED) paint and pretreatment processes at its Hopkinsville, Kentucky manufacturing operation. This is a hands-on, plant-based role focused on paint application chemistry, E-Coat bath control, coating quality, defect diagnosis, process troubleshooting, and environmental compliance. You'll serve as a technical owner for an approximately 11-12 stage wet-process coating system, supporting the process from rinses and pretreatment/etch stages through the electrodeposition paint bath. This is an excellent opportunity for someone with strong E-Coat, industrial paint, pretreatment, surface treatment, or chemical process experience who enjoys hands-on troubleshooting, process ownership, and continuous improvement. Key Responsibilities
- Own and optimize E-Coat/ED coating, pretreatment, rinse, and associated chemical processes, controlling critical parameters including pH, conductivity, bath solids, chemical concentration, temperature, voltage, pressure, and flow.
- Manage bath chemistry, titration results, chemical additions, replenishment, filtration, and preventative bath maintenance, partnering closely with chemical suppliers.
- Diagnose coating-quality issues including adhesion failures, poor coverage, thickness variation, contamination, blisters, craters, runs/sags, appearance issues, and corrosion failures.
- Analyze laboratory, process, production, and equipment data to identify abnormalities, determine root cause, and lead corrective actions using A3, PDCA, 8-Step, or similar methodologies.
- Develop standardized work instructions, process limits, control plans, reaction plans, troubleshooting procedures, and best-practice documentation, while coaching technicians and plant personnel.
- Support wastewater treatment, environmental compliance, equipment reliability, process trials, capital improvements, commissioning, and new model/production-readiness activities.
- 5+ years of relevant E-Coat, ED coating, industrial paint, pretreatment, surface treatment, corrosion protection, or chemical process experience preferred; candidates with 2-3+ years of highly relevant experience will also be considered.
- Strong knowledge of paint/coating chemistry, bath management, titration, chemical additions, surface preparation, pretreatment, and corrosion protection.
- Proven ability to diagnose coating defects and process abnormalities using chemistry, laboratory results, process data, equipment conditions, and quality testing.
- Hands-on manufacturing experience with strong process ownership, structured problem-solving, leadership, and the ability to coach technicians and collaborate across Production, Quality, Maintenance, Environmental, and Engineering teams.
- Experience with wastewater treatment, reverse osmosis, filtration, environmental compliance, and standardized process documentation is highly desirable.
- Automotive experience is preferred, although relevant experience from heavy equipment, appliances, canning, oil & gas, or other industrial coating environments will be considered. Allen-Bradley/Rockwell PLC exposure and paint/coating certifications are additional pluses.
Vacancy posted 3 days ago
Similar jobs that could be interesting for youBased on the E-Coat / Paint Process Engineering Specialist in Kentucky vacancy
- ...make the products we rely on, processes, and new technologies... ...friendly cooling, and high-quality paints and coatings for homes and industrial... ...Chemours is seeking a Process Engineer to join our growing Louisville... ...used in a Chemical Plant (i.e. pumps, compressors, piping,...SuggestedFull timeLocal area
- ...Description Position Overview Mural Group is partnering with a global Tier 1 automotive supplier to hire a Process Engineer focused on e-coat, paint, and surface finishing processes within a high-volume manufacturing environment. This role is responsible for optimizing...Suggested
- ...Job Description Job Description The Pittsburgh Paints Company is looking for a Process Engineer for the production facility based in Louisville, Kentucky... ...or in the future). This includes H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-...SuggestedFor contractorsH1bVisa sponsorshipWork visa
- ...Summary: We are looking for a proactive and detail-oriented Process Engineer to join our team in the automotive manufacturing sector. The... ...management skills. Working knowledge of lean manufacturing tools (e.g., 5S, Kaizen, Value Stream Mapping). Excellent...SuggestedShift workNight shiftAfternoon shift
- ...Process Engineer Mural Group is partnering with a global manufacturing organization to hire a Process Engineer focused on coatings and adhesive applications within a high-volume production environment. This role is responsible for optimizing how materials are applied...Suggested
- ...d like to meet us. Ashland has an exciting opportunity for a Process Engineer to join our Ashland Specialty Ingredients business at our Calvert... ...variety of markets and applications, including architectural coatings, automotive, construction, energy, personal care and...Full timeContract workInternship
- ...Process Engineer Job Description Join the team behind iconic brands like Huggies®, Kleenex®, Cottonelle®, Scott®, Kotex®, Poise®,... ...providers preferred. Demonstrated continuing self-development (i.e., progress toward an advanced degree) preferred. A...Full time
- ...Job Description Job Description Job Title: (Paint SE Upper Body Engineer) About Kyyba: Founded in 1998 and headquartered in Farmington... ...to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact Kyyba...InternshipVisa sponsorshipWork visa
- ...Description: Our client's Production Engineering Department is looking for a passionate and... ...role is to lead new model activity in Paint SE (Simultaneous Engineering) function as... ...'s objective to provide new model processes to manufacturing facilities that meet Paint...Internship
- ...Description Key Skills: VMS, OMS, Integration, Process Improvement, Quality, WMS, Business... .... Job Summary: ~ The Process Engineer provides support and enhancements to existing... ...with different testing methodologies (e.g., functional testing, regression testing...
$100k - $120k
...Echelon. Solstice Consulting Group is seeking a Production Engineer for a chemical manufacturing client in Brandenburg, Kentucky... ...sector required ~ Experience in continuous and/or batch processes and control systems preferred; manufacturing experience preferred...Hourly payLocal areaRelocation package- ...for a talented and experienced Quality Engineer to join our team in Marshall, Michigan.... ...for the quality control of a repackaging process including repackaging quality, data management... ...in using Microsoft Office software (e.g., Microsoft Office Suite). # Strong data...Full timeWork at office
- ...leading high-performing teams? We are seeking a dynamic Senior Process Improvement Engineer to spearhead operational excellence within our... ...characteristics protected by law.GE Appliances participates in E-Verify and will provide the federal government with your Form...Full timeWork at officeVisa sponsorshipWork visaFlexible hoursShift workWeekend work
- ...utilization, and First Time Yield 2. Improvement of mass production process monitoring and anomaly analysis 3. Risk assessment and... ..., Minitab, JMP and other data analysis software ~ Master engineering methods such as 6sigma, DOE, MSA, SPC, FMEA and 8D ~ Clear logical...Full timeWork experience placementWork at officeRelocation package
- ...pride in mentoring others and raising the capability of a team over time? We are looking for a seasoned, floor-oriented Process Engineer who can support both manufacturing and packaging. This person must be able to troubleshoot in real time with operators, stabilize...Full timeContract work
- ...Job Description Job Description BlueWave is hiring a Process Engineer for an advanced manufacturing client based in Glendale, Kentucky. As a Process Engineer, you will own manufacturing equipment and production processes from specification and procurement through...Daily paidPermanent employmentContract work
$36 - $46 per hour
...Job Description Job Description Process Engineer We are seeking an experienced Process Engineer to support manufacturing operations, process optimization, equipment improvements, and continuous improvement initiatives. This role will work cross-functionally to improve...Contract workTemporary work- ...make the products we rely on, processes, and new technologies... ...friendly cooling, and high-quality paints and coatings for homes and industrial... ...detail-oriented Electrical Engineering Designer to join our Capital... ...C) design. Experience using E3D, Autodesk Inventor, SKM PowerTools...Full timeFor contractorsWork at officeLocal area
- ...journey? The AME Finishes COE Engineer is responsible for leading and... ...projects related to internal coating operations as well as supporting... ...and implement improved processes and control methods for internal... ...product development and control (i.e. Gage R&R, Process Capability,...Permanent employmentFull timeFlexible hours
$90k - $144.9k
Process Controls EngineerShelbyville, KY, United StatesCome make the world and accelerate... ...CADET, and HUSTLER.The Job: As the Process Engineer, you’ll be an onsite employee,... ...drawingsStrong knowledge of PLC programming (e.g., Allen-Bradley, Siemens)Experience with...Full timeH1bLocal area- ...is seeking a Senior Mechanical Engineer to join our growing team! This... ...engineering for chemical process manufacturing.Identifies, leads... ...industries ranging from automotive, paints, and plastics to electronics,... ...employerChemours is an E-Verify employerCandidates must...Full timeLocal area
$70.78k - $97.32k
...polysilicon, wafers, and innovative photovoltaic modules, enabling low-cost solar energy solutions Role Purpose: The Forming Process Engineer will transfer new technologies and processes from development to manufacturing production lines. The role focuses on advancing...Full timeNight shiftWeekend workAfternoon shiftEarly shift- ...make the products we rely on, processes, and new technologies... ...friendly cooling, and high-quality paints and coatings for homes and industrial... ...seeking a Senior Reliability Engineer to join our Asset Care team.... ...strategiesProficiency with CMMS/EAM systems (e.g., SAP PM, Maximo)Strong...Full timeLocal area
- ...development, system qualification, deployment, and production release. Collaborate closely with cross-functional teams including QA, engineering, manufacturing, software and controls teams to implement robust measurement solutions. Develop metrology strategies in terms of...Contract workWork experience placementLocal area
- Process Engineer About SiteCatalent’s Winchester, KY site is the company’s flagship U.S. manufacturing location for large‑scale oral solid dose forms, operating from a 180,000‑square‑foot facility with fully integrated development and analytical services. The site specializes...Full timeFor contractorsWork at officeLocal areaMonday to FridayShift work
$99.55k - $124.44k
...nationwide. Job Description Summary: The Engineer III, Energy Storage is responsible for... ...will be discussed during the interview process. Job Description: *This job description... ...Proficiency in power system analysis (PSS/E, PSCAD, etc.) and simulation tools. ~...Full timeFor contractorsWork at officeLocal areaRemote work- ...Job Description Job Description ~ Process Engineer over a manufacturing operation that includes mixing cooking and highspeed packaging of food products. Lean and Continuous improvement of all processes in support of agressive growth plans for plant located...
- ...fostering inclusivity. Every part and every voice matters. Position Summary The Manufacturing Engineer develops, optimizes, and troubleshoots CNC machining processes to ensure safe, efficient, and cost-effective production. This role requires strong CNC programming...Work experience placementWork at office
- ...year during it is first 3 years. As a young company we continue to plan further expansion in organic growth. Position: Process Engineer Overview Are you a highly motivated individual with a passion for innovation? Are you seeking a role that will challenge you...
- ...Job Description Job Description Summary: ~ CBS LLC is seeking an experienced Process Engineer to provide manufacturing and sustaining engineering support within a regulated manufacturing environment, with a focus on process optimization, validation, equipment...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to E-Coat / Paint Process Engineering Specialist. Be the first to apply!




