Medical Equipment Delivery Technician
CDL NUCLEAR TECHNOLOGIES LLC
Job Description
Job Description
Medical Equipment Delivery Technician
???? Position Details- Position Type: Full-Time | Hourly | Non‑Exempt
- Primary Location: Boston, MA
- Travel: 1-4 nights away per week
???? About CDL Nuclear
CDL Nuclear Technologies, LLC is committed to meeting customer needs through flexibility, accountability, and continuous improvement. This job description summarizes key responsibilities and requirements; employees may be asked to perform additional duties consistent with their qualifications. All roles are expected to contribute to quality initiatives, teamwork, and exceptional customer service, including professionalism, courtesy, responsiveness, and empathy.
The Medical Equipment Delivery Technician is responsible for the safe transportation, delivery, installation, and setup of medical equipment at healthcare facilities. This role includes handling mobile imaging equipment, Rb‑82 Infusion Systems, and associated computer workstations. The position directly supports patient care by ensuring equipment is delivered, installed, and operational according to regulatory and safety standards at hospitals, clinics, physician offices, and other healthcare institutions.
???? Key Responsibilities- Safely operate company vehicles in compliance with traffic laws and company policies
- Perform pre‑ and post‑trip vehicle and equipment inspections
- Load, secure, transport, and unload equipment using proper handling and safety procedures
- Install and set up equipment onsite, including:
- Following clean technique when required (training provided)
- Connecting and configuring basic computer hardware and software
- Conducting functionality and site‑readiness checks to ensure equipment is in “ready‑to‑scan” mode when required
- Comply with DOT, NRC, OSHA, and HAZMAT regulations, including proper documentation (BOL, van surveys, wipe surveys; training provided)
- Complete and maintain accurate delivery documentation and required records in a timely manner
- Maintain cleanliness and organization of vehicles, equipment, hub locations, and customer facilities
- Perform routine vehicle and equipment maintenance (fluids, fuel, oil, etc.)
- Maintain facility security and follow after‑hours access protocols when applicable
- Immediately report equipment, vehicle, or facility issues or damage to leadership
- Communicate clearly and professionally with customers, coworkers, and management
- Provide courteous, empathetic customer service to support customer satisfaction
- Work flexible schedules, including long routes, overnight travel, and schedule changes
- Maintain a clean driving record and adherence to company safety standards
- Work independently and assist with training or instructing coworkers as needed
- Valid driver’s license with a safe driving record (no serious incidents within the past two years)
- Ability to work independently and manage changing schedules
- Willingness to drive long distances, work overnight hours, and travel 1–4 nights per week
- Strong communication and customer service skills
- Ability to lift up to 75 lbs. and perform moderate physical labor
- Basic computer setup and troubleshooting skills
- Familiarity with Microsoft Office; Microsoft Teams experience preferred
- Strong attention to detail and commitment to regulatory compliance
- 3+ years of Class II driving experience
- HAZMAT training related to radioactive materials
- Experience with medical equipment transport, loading, or maintenance
- Requires manual dexterity, hand‑eye coordination, and fine motor skills
- Moderate physical exertion, including lifting, pushing, pulling, bending, and reaching
- Equipment may weigh up to 1,000 lbs. (air‑ride suspension used for transport assistance)
- Frequent regional or interstate travel with overnight stays
- Driving in varied conditions, including night, inclement weather, congested areas, and tight spaces
- Work performed in medical environments with strict regulatory compliance requirements
Join a well‑established, nationwide organization that invests in your long‑term success. Our people are the reason we lead the industry — and we believe in recognizing dedication and performance.
Comprehensive Benefits Include:
- Competitive pay
- Medical, Dental, and Vision Insurance
- Short‑Term Disability
- Company‑paid Long‑Term Disability
- Company‑paid Life & AD&D Insurance
- 401(k) with company match
- Paid Holidays & PTO
- Company‑paid overnight per diem
- Company‑provided uniforms
- State licensure reimbursement
- Hands‑on training and development
- Career advancement opportunities
- Employee discounts & referral program
CDL Nuclear Technologies is an Equal Opportunity Employer.
All employment decisions are based on individual merit and business needs.
- Merrimack Manufacturing in Manchester, NH is seeking a Production Inspector to ensure production processes run efficiently, accurately document assemblies, and monitor line performance for quality and safety. The role requires attention to detail and the ability to work...SuggestedMonday to Friday
$2,287 per week
...perform special procedures such as conscious sedation, trauma alerts, and stroke alerts. Special equipment used includes point-of-care ultrasound, EPOC, and other emergency medical devices. Interdisciplinary support includes IV teams, respiratory services, and social...SuggestedFull timeContract workShift workNight shiftWeekend work$46.97 per hour
...projects, facilitates applicant meetings throughout the program delivery and recovery stages, and communicates the final determination... ...pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression...SuggestedWork experience placementH1bImmediate startFlexible hours$159.43k
...employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, physical or mental disability...SuggestedContract workFor contractorsWork experience placementH1bImmediate startOverseasFlexible hours- ...immediate opening for a Mechanical Inspector to work in a dynamic Medical Device Research, Development, and Manufacturing company. This... ...reading and apply to incoming inspection practicesOperate CMM equipment and utilize various measuring tools for inspection of medical device...SuggestedImmediate start
$30 - $60 per hour
...become the nation's most respected Low Voltage Installation Partner. We will accomplish this by providing the highest caliber of technicians in the field, by doing business as a relationship-based partner, and by creating the most pleasant business experience in our industry...Hourly payFor contractorsWork experience placementLocal areaRemote work- ...organization, is looking for a Clinical Specialist to support one of our medical device projects as it moves toward clinical use. We are... ...commitment); train and certify external perfusionists, technicians, and clinical staff; proctor early cases, then step down to as...
- ...role requiring mechanical aptitude and basic electrical knowledge to safely operate, inspect, troubleshoot, and maintain powered equipment and vehicles, as well as the ability to lift, push, pull, and manipulate equipment and packages of significant weight. Employees must...Permanent employmentShift work
- ...Development, housed in Manchester, NH, is looking for a Junior Mechanical Engineer to participate in the development of innovative medical devices. The role involves concept generation, prototyping, component and assembly development, testing, and documentation as the team...
- Vistra Energy is seeking an I&E Technician for a combined cycle power plant. Responsibilities include maintaining, repairing, and troubleshooting... ...such as Honeywell Experion, Siemens T3000, and Allen-Bradley equipment. You will read diagrams, process data, and support plant...
- SolutionHealth is seeking a Facilities Maintenance Technician to support the management and operation of all mechanical equipment, systems, and spaces within the facility. The role involves monitoring boilers, chillers, pumps, and other machinery to ensure reliable plant...
- DEKA Research & Development is seeking a Junior Product Complaints Engineer to join a dynamic Medical Device R&D environment in Manchester, NH. You will review complaints and perform evaluations, ensuring documentation aligns with FDA regulations and QMS requirements. You...
- Natus Medical is seeking a Territory Manager for BrainWatch in the Northeast. You will lead sales efforts to acquire new subscriptions and expand BrainWatch adoption across hospital partners, interfacing with neurology, ICU, ED, IT, and admin teams. The role requires a...
- DEKA Research and Development in Manchester, NH, seeks a qualified individual to assess complaints regarding medical devices. The role requires strong knowledge of FDA regulations and experience with complaint handling. Candidates should possess a biomedical engineering...
- A leading medical device company in Manchester, NH is seeking a Regulatory Affairs Project Manager. The role involves defining and executing regulatory strategies for FDA approval of innovative life science devices, mentoring staff, and leading FDA interactions. Candidates...
- ...Development in Manchester, NH, seeks a Calibration Technician to join the Quality team. This role supports calibration programs, maintains equipment databases, and coordinates internal and external calibrations in a medical device R&D setting. The ideal candidate has ESD...
- ...Job TitleMerrimack Manufacturing is a medical device manufacturer located in the Manchester Millyard. We are a growing manufacturing company that will play a crucial part in bringing innovative and life changing products to life.Position OverviewThis position will support...Work at office
- ...R&D has an immediate opening for a Calibration Technician to work on the Quality team in a modern dynamic Medical Device Research and Development environment. This... ...will make an impact: Enter measurement and test equipment into the calibration program per procedures...Contract workWork at officeImmediate start
- DEKA Research and Development, housed in Manchester, NH, has an exciting opportunity for a Systems Engineer Co-Op to work in a dynamic Biomedical Research and Development environment. This Systems Engineer Co-Op will have exposure to several different aspects of product...Full time
- ...inspections, mentor junior inspectors, and ensure products meet regulatory and customer requirements. You will lead inspections of medical devices and components across production, document results, and drive continuous improvement with cross-functional teams. Strong knowledge...
- DEKA Research and Development, on behalf of Millyard Advanced Medical Products, is seeking a Quality Systems Specialist to join a dynamic Medical Device R&D environment. The position reports to the Director of Quality, with high visibility and direct impact on the QMS....
- Technical Needs is seeking a Production Cleanroom Team Lead for Manchester, NH to supervise the night shift in a sterile, regulated environment. You will oversee assembly, testing and documentation of mechanical and electrical devices while upholding quality and safety ...Night shift
- DEKA Research and Development, located in Manchester, NH, seeks a Systems Engineer Co-Op to gain experience across product development and systems engineering. The role includes hands-on troubleshooting, systems architecture, and risk management in a biomedical R&D environment...
- ...reliable and versatile 1st Shift Manufacturing Technician with excellent attention to detail to assemble medical devices. Applicants must be self-sufficient in assembly... ...fixtures, calibrated instruments, measurement equipment, microscopes, and test fixtures. Utilize...Permanent employmentTemporary workImmediate startMonday to FridayDay shift
- ...position is ideal for individuals looking to begin a career in the medical device industry, with opportunities for growth into more... ...files for traceability and compliance. Ensure that inspection equipment is calibrated and properly maintained before use. Assist with...Contract workWork at office
- DEKA Research and Development in Manchester, NH seeks a Junior Verification and Validation Test Engineer to join a medical device R&D team. The role offers high visibility, with a direct impact on project success through hands-on testing of interfaces and hardware. You...
- ...level technical and people leadership to project teams Drive delivery of aggressive goals while managing project schedule, cost, and... ...in an engineering discipline with a minimum of 5 years leading medical device product development teams solving challenging technical...Full time
- ...and product type. Managers may work in medical device manufacturing or may support the... ...work schedules, planning activities, and equipment maintenanceDirects personnel to complete... ...for directing activities of Manufacturing Technicians. Assist in the preparation of staff...
- DEKA is looking for a hands-on, detail-oriented Engineering Service Technician to help keep our medical devices and test equipment running smoothly. In this role, you’ll work with different groups across the company to solve problems, dig into root causes, and maintain...Work at office
- Technical Needs in Manchester, NH seeks a Manufacturing Technician to join a dynamic medical device team. You will assemble plastic and metal components into devices, following drawings, BOMs, and visual aids, with tasks like soldering and testing as needed. The role runs...Contract workDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Medical Equipment Delivery Technician. Be the first to apply!
- med surg medical surgical rn registered nurse Manchester, NH
- medical Manchester, NH
- medical terminology Manchester, NH
- american medical response Manchester, NH
- senior medical science liaison Manchester, NH
- medical marijuana physician Manchester, NH
- medical transportation driver Manchester, NH
- apprenticeship medical Manchester, NH
- medical ai Manchester, NH
- medical internship Manchester, NH




