Manufacturing Engineer
NEOVOLTA POWER LLC
Benefits:
401(k)
401(k) matching
Health insurance
Opportunity for advancement
Paid time off
Vision insurance
Wellness resources
Position Summary
The Manufacturing Engineer supports the Manufacturing Manager in daily production operations, line management, and cross-functional initiatives. Acting as a bridge between R&D and shop-floor execution, this role leads the introduction of new products, processes, materials, and components into production. Primary responsibilities include identifying operational bottlenecks, conducting root-cause analysis, implementing corrective actions, generating standard technical documentation, and delivering hands-on training to ensure safe, consistent, and lean manufacturing output.
Key Responsibilities
- Daily Operational & Production Support
Assist the Manufacturing Manager with daily priorities, capacity planning, line balancing, floor layouts, and action-item tracking to ensure timely closure.
Collect and analyze manufacturing metrics including yield, throughput, downtime, scrap rates, and labor efficiency.
Provide continuous, hands-on support on the shop floor to quickly adapt to shifting operational priorities.
- Issue Resolution & Continuous Improvement
Proactively detect workflow, equipment, tooling, quality, and material issues across active assembly lines.
Coordinate cross-functional troubleshooting with R&D, Quality, Maintenance, EHS, and Supply Chain teams.
Utilize structured problem-solving methodologies (5S, RCA, CAPA, PFMEA) to isolate root causes, execute corrective actions, and verify long-term effectiveness.
Drive continuous improvement initiatives targeting cycle times, safety standards, cost reduction, and material waste.
- New Product & Process Introduction (NPI)
Serve as the primary manufacturing liaison to R&D during new product launches, process design, and material introductions.
Evaluate product designs, BOMs, and drawings for Design for Manufacturability (DFM) and production readiness.
Lead prototype trials, pilot builds, process validations, and ramp-up activities; manage Engineering Change Orders (ECOs) through floor execution.
Partner with Quality and Supply Chain on vendor/component qualification and risk mitigation prior to mass release.
- Documentation & Employee Training
Author, standardize, and maintain Standard Operating Procedures (SOPs), Work Instructions (WIs), visual aids, and assembly checklists.
Translate complex engineering specifications into intuitive instructions for operators.
Design and deliver onboarding, cross-training, and retraining programs covering equipment operation, quality standards, and safety compliance.
Audit point-of-use documentation and incorporate floor feedback to continuously enhance procedural accuracy.
Qualifications
Education: Bachelor’s degree in manufacturing, Industrial, Mechanical, or Electrical Engineering (or related technical field).
Experience: 3+ years in manufacturing, production, or process engineering supporting active shop-floor environments.
Technical Skills: Hands-on expertise in NPI, process validation, line balancing, and engineering change management.
Methodologies: Solid grounding in Lean Manufacturing, 5S, RCA, CAPA, PFMEA, and continuous improvement frameworks.
Documentation & Systems: Proven ability to write concise SOPs and training content; proficient in MS Office (Excel, Word, PowerPoint); ERP/MES experience is a plus.
Work Environment: Strong communication and problem-solving skills; ability to work on-site in a high-velocity, fast-paced manufacturing facility.
- ...Job Description Manufacturing Engineer Who: A hands-on Manufacturing Engineer with 2-3+ years of engineering experience who thrives on improving safety, quality, productivity, and manufacturing processes. What: Design, develop, implement, and optimize manufacturing...SuggestedFull timeWork at officeMonday to Friday
- ...Join our dynamic team as we design, develop, and enhance manufacturing processes that drive innovation and efficiency! Your expertise will... ...arise. Qualifications: Bachelor's Degree in Engineering or a related field in manufacturing. Skills in dealing with...Suggested
- ...Manufacturing Engineer II Country/Region: US Location: Gainesville, GA, US, 30507 Req ID 90919 | Gainesville 2, United States ZF Gainesville, LLC Job Description About the team: Perform assignments designed to streamline the assembly process by reducing...SuggestedWork at office
- ...Manufacturing Engineer Position Plans and coordinates manufacturing processes. Develops and improves manufacturing processes by studying product and manufacturing methods. Runs projects with some oversight from management and senior engineers. Position Responsibilities...SuggestedWork at office
- ...Manufacturing Engineer We are seeking a motivated Manufacturing Engineer to support site operations and drive continuous improvement initiatives within a manufacturing environment. This individual will work closely with operations leadership and the Site Continuous...Suggested
- ...Industrial Engineer Position Overview: We are seeking a results-driven Industrial Engineer to support and improve manufacturing operations at our Braselton, Georgia facility. This role is focused on analyzing processes, optimizing layouts, improving labor efficiency...
- ...Job Description Job Description Process Engineer (Automation Engineer) About IMS Gear: With a history spanning over 160 years... ...incl. new partial process solutions and modification of manufacturing processes Participates in 8D problem-solving activities (internal...Full timeTemporary workWork experience placement
- ...Senior Engineer Plays a key role in analyzing, designing, and optimizing systems and processes within manufacturing or operations environment. This position supports and leads moderately complex projects aimed at improving efficiency, reducing costs, and enhancing product...
- ...programs, including business plans and budgets. - Demonstrate knowledge of Labor Management and Incentive Programs, including engineered labor standards and Labor Management systems. - Knowledge of retail Distribution Center operations. Supervisory Responsibilities...Work experience placementLocal areaNight shift
$104.8k - $136.2k
...leading off-price retailer. Job Description:The Opportunity: Grow Your Career.The primary purpose of this position is to lead all engineering activities and establish a mentality of process improvement within our distribution center. The Industrial Engineering Manager...Temporary workWork at officeLocal areaHome office- ...NeoVolta Power, LLC is building one of the next-generation battery manufacturing platforms in the United States — and we’re looking for... ...make it possible. Position Summary As a Procurement Engineer, you will drive our manufacturing and operational success by...
- ...Automation Engineer Job Description Automation Engineer CBRE is an equal opportunity employer that values diversity. Job Summary At CBRE Global Workplace Solutions (GWS), Safety is our top priority! We maintain a safety-first culture...For contractorsWork at officeRemote workFlexible hoursShift workNight shift
- What We DoFOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with...Full timeWork at officeWorldwide
- ...time direct hire position. POSITION OVERVIEW As a Process Engineer II your roles and responsibilities will include: The Process Engineer II will provide technical leadership in a manufacturing environment, focusing on process optimization, troubleshooting,...Permanent employmentFull timeFor contractorsRemote workRelocation
- ...becoming part of North Americas largest steel and steel products manufacturer offering unmatched career opportunities and stability. We are... ...What Youll Do: We are seeking a Senior Process Systems Engineer to serve as the technical owner for Process & Instrumentation...Full time
- ...Layout Engineer At JBT Marel, we're looking for a Layout Engineer. You will be responsible for creating optimal solutions for integrated projects and preparing layouts with item lists for the sales process based on the customer need. As a Layout Engineer you are designing...Temporary workLocal area
- ...Description Job Description This role combines hands-on controls engineering, system integration, and continuous improvement, working... ...reliability, and throughput. You’ll partner closely with manufacturing, maintenance, IT, vendors, and leadership to design, deploy,...Shift workWeekend work
- ...Job Description Job Description Process Engineer – CNC Machining & Automation Ready to make things move? At IMS Gear, we don’t just manufacture components—we power motion worldwide. We are seeking a Process Engineer with experience in CNC machining, automation...Temporary workWork at officeWorldwide
- Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented...Permanent employmentWork at officeLocal areaMonday to FridayFlexible hours
- ...Job Description Job Description This Civil Engineer role assumes working with stakeholders within the engineering office to provide direction for Wastewater projects and supplemental Civil Engineering support. Perform engineering duties in planning, designing, and...Work at officeFlexible hours
- ...Warren Controls in Bethlehem PAis a growing manufacturer of industrial valves and pressure-containing equipment serving demanding applications... ...strong pipeline of new projects and continued investment in engineering were building a team that thrives on technical excellence...Full timeImmediate startWorldwide
- ...Electrical Engineering Department Manager / Senior Electrical Engineer, P.E. Location: Gainesville, GA (Hybrid) Position Overview We are seeking an experienced licensed Electrical Engineer, P.E. to establish and lead an electrical engineering department...For contractorsFlexible hours
$75k
...Job Title Infrastructure Engineer Job Description This position is designated as safety-sensitive. As such, a pre-employment physical examination and drug screening are mandatory. The incumbent will also be subject to random drug and alcohol testing throughout...Temporary workFor contractorsLocal areaFlexible hours- ...Electrical Engineer Element has an opportunity for an Electrical Engineer to join our rapidly expanding team. As a member of the... ...electronics, wearables, and industrial markets, the laboratory helps manufacturers ensure the safety, reliability, and performance of battery-...Local area
- ...Electrical Engineer Gainesville - Gainesville, GA 30501 Overview Position Type Full Time Category Design & Engineering Description The Greenville, SC office of Carroll Daniel Engineering is seeking an experienced professional Electrical Engineer to lead...Full timeWork at officeLocal areaNight shift
- ...Position Summary The Mechanical Engineer - Sustaining supports Cantrell-Gainco equipment throughout its life through engineer... ...delivers accurate and complete results on time, and partners with manufacturing, quality, supply chain, service, and sales to keep customers’...InternshipWork at office
- ...Rapids, Minnesota Part-time Chick Delivery Driver - Lufkin - 2 Locations Truck Driver Night Shift - Lufkin - Lufkin, Texas Engineering Electrical Engineer - 4 Locations Plant Engineer - Lafayette, Georgia Refrigeration Engineer - 8 Locations...Hourly payPart timeInternshipSeasonal workShift workNight shiftDay shiftAfternoon shift
- What We DoFOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with...Full timeWorldwide
$121k - $181.6k
...Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass... ...bonus. Position Overview: The Senior Electrical and Controls Engineer provides Electrical Controls Engineering for the implementation...Full timeTemporary workFor contractorsRemote workFlexible hours- ...Description Job Description Job Title: Production Technology Engineer Report to: Production Technology Manager Job Type: Full... ...production version control to ensure efficient and stable manufacturing operations. This role supports new product introduction (NPD)...Full time
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Manufacturing Engineer. Be the first to apply!
- quality manufacturing Pendergrass, GA
- industrial manufacturing Pendergrass, GA
- tool manufacturing Pendergrass, GA
- manufacturing Pendergrass, GA
- manufacturing positions Pendergrass, GA
- manufacturing production Pendergrass, GA
- fabrication manager Pendergrass, GA
- senior manufacturing test engineer
- snowboard manufacturing engineer
- process engineer manufacturing




