Certified Welding Inspector
Rust Belt Recruiting
Who we are
We are a leading manufacturer of specialized steel infrastructure and utility structures.
Quality Technician Role
The Quality Technician performs essential quality inspections on in-process and finished steel products to ensure strict adherence to customer specifications and safety standards. This role exists to maintain structural integrity, verify weld compliance, and support production teams with technical quality expertise. The Quality Control Technician reports directly to the Quality Manager. This position does not have any direct reports.
Quality Technician Responsibilities
Perform comprehensive quality inspections on steel poles
-
Conduct dimensional audits at initial setup
-
Perform Visual Inspection (VT) on all welds in accordance with industry standards
-
Execute Magnetic Particle Testing (MT) and Ultrasonic Testing (UT) to identify defects
-
Maintain accurate inspection records, resource sheets, and testing reports
-
Report and document non-conforming or out-of-specification products
-
Educate production staff on established quality standards and procedures
-
Adhere to all organization safety policies, daily equipment inspections, and PPE requirements
About You
Possess a High School diploma or GED equivalent and a valid driver's license
-
Hold 1–3 years of hands-on Quality Control experience, specifically with AWS D1.1 standards
-
Maintain Level I or II certifications in Magnetic Particle Testing (MT) and Ultrasonic Testing (UT)
-
Demonstrate proficiency using measuring tools, including weld gages, tape measures, and girth tapes
-
Exhibit the ability to effectively use quality tools such as MT yokes, UT scopes, and QC stamps
-
Demonstrate strong verbal and written communication skills to collaborate with production teams
-
Offer experience working with Department of Transportation (DOT) standards for traffic or utility structures
-
Show a preference for CWI Certification and familiarity with Epicor ERP systems.
Next Steps
If being detail-oriented and safety-conscious describes you, we would like to hear from you.
Additional Information
Physical Demands & Working Conditions:
Ability to stand and walk for extended periods of time
-
Ability to occasionally pull, push, carry, or lift tools and materials weighing up to 50 lbs
-
Ability to withstand occasional bending, squatting, crouching, and frequent manual handling of tools
-
Ability to work in inclement weather conditions, including extreme cold, heat, and humidity
-
Required to wear appropriate PPE including steel-toe shoes, gloves, ear protection, a hard hat, and safety glasses
Equal Opportunity Employer: We are an equal opportunity employer. We do not discriminate in recruiting, hiring, or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status, or any other basis or characteristic prohibited by applicable federal, state, or local law.
\#INDRBR
- ...Certified Welding Inspector (CWI) - Canton, OHIntertek, a Nationally Recognized Testing Lab (NRTL) and leading provider of quality and safety solutions to many of the world's leading brands and companies, is actively seeking a Certified Welding Inspector to join our Professional...SuggestedShift work
- ...Job Description Certified Welding Inspector (CWI) - Canton, OH Intertek, a Nationally Recognized Testing Lab (NRTL) and leading provider of quality and safety solutions to many of the world's leading brands and companies, is actively seeking a Certified Welding...SuggestedWorldwideShift work
- ..., directing, training, disciplining, and improving of all the departments that comprise Shop Services, including Equipment Rebuild, Weld Shop, Utility Crew, Machine Shop, Die Shop, and Carpenter Shop. Required to work overtime or weekends as per business needs. Responsibilities...SuggestedApprenticeshipWork at officeImmediate startRelocationShift workWeekend work
$17.22 - $20.66 per hour
...Quality Inspector As a Quality Inspector you will perform quality control inspections, checks, and tests during the manufacture of wire & cable assemblies. You will inspect materials, parts and products at different stages of production. Responsibilities:...SuggestedHourly payImmediate startWorldwideShift work- ...Job Description Position Summary A Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects...SuggestedFull timeWork at officeShift work
- ...As a Quality Inspector you will perform quality control inspections, checks, and tests during the manufacture of wire & cable assemblies. You will inspect materials, parts and products at different stages of production. Responsibilities: Approves incoming...
- ...Job Title: Quality Control Inspector Department: Quality Location: Canton, OH (On-Site) Role Type: Full-Time, Hourly Reports To: Quality Manager Direction From: Quality Manager Job Description: The Quality Control Inspector must have high attention to detail. This role...Hourly payFull timeContract workTemporary workFor contractorsWork at officeWeekend work
- ...Quality Control InspectorThe Quality Control Inspector must have a high attention to detail and a strong commitment to quality standards. This role may support one or more departments (Fabrication, Assembly, Painting, and Electrical) and must be fluent in Engineering drawings...Work at officeWeekend work
$15 per hour
**Quality Control Inspector** PeopleReady of Norton, OH is now hiring Quality Control Inspectors in Canton, OH! Apply today and you could start as soon as this week. **As a PeopleReady associate you'll benefit from:** + Connections and experience with some of the top companies...Hourly payTemporary workLocal areaImmediate startShift workWeekend workDay shift- ...Job Title: Quality Control Inspector - 1st & 3rd Shift Available Department: Quality Location: Canton, OH (On-Site) Role Type: Full-Time, Hourly Reports To: Quality Manager Direction From: Quality Manager Job Description: The Quality Control Inspector must have a high...Hourly payFull timeContract workTemporary workFor contractorsWork at officeNight shiftWeekend workDay shift
- As a Quality Inspector you will perform quality control inspections, checks, and tests during the manufacture of wire & cable assemblies. You will inspect materials, parts and products at different stages of production. Responsibilities: Approves incoming materials by...Immediate startWorldwide
- ...Job Summary: The Weld Process Engineer continually monitors the welding processes and verifies that all machines are functioning properly to produce quality sound parts and required to have an advanced knowledge of welding parameters and principals to make adjustments...Full timeNight shift
- ...audits, and technical reviews to ensure alignment with quality expectations. · Training & Knowledge Sharing: Educate operators, inspectors, and supervisors on metallurgical requirements and best practices. Serve as a subject-matter resource within the Quality function...Work at officeWorldwide
- ...Responsibilities Follows all corporate safety guidelines Operates saws, shears, cranes and other shop equipment as needed Fabricates, welds, grinds and burns numerous types of metals Maintains shop floor organization and cleanliness Goes on service calls that may...Hourly payLocal area
- ...-quality metal products, working from technical drawings, and taking pride in precision craftsmanship. If you have experience with welding, fabrication, and metalworking equipment, we'd like to hear from you.Key ResponsibilitiesFabricate and assemble metal components using...
$23 - $25 per hour
Machinist PositionSnelling Staffing of Canton Ohio is currently looking for two experienced machinists for a steel mill in Canton, OH.Two shifts to pick from: second shift position 3 PM – 11 PM Mon – Fri. Midnights Sun – Thur 11p-7aMUST HAVE EXPERIENCE WITH MILL MACHINIST...Hourly payShift workNight shiftAfternoon shift$35 per hour
Travel WeldersPro Mechanical Services Co. is seeking Travel Welders. This is a contract position with a manufacturer in Canton, Ohio. You must live 100 miles outside of Canton, Ohio to qualify for the travel pay rate and per diem. Welders must be able to pass a box pressure...Weekly payDaily paidContract workMonday to FridayShift workNight shiftWeekend work$38.01 - $42.48 per hour
...: ASAP We are seeking Welders and Pipefitters for long-term maintenance in Canton, OH. The Welder position lays out, fits, and welds fabricated, cast, and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building...Immediate start- ...they utilize standard fabrication equipment to ensure precision and quality in their work. This position demands strong skills in welding, fitting, blueprint reading, and metal fabrication to meet safety and performance standards. Responsibilities Perform welding...
$28 - $35 per hour
...climb towers up to 300 ft, be able to pick up 50 lbs., and be capable of working up to 12 hours. Must have experience in industrial welding in the Telecom Tower industry. Structural modification experience is preferred. Compensation of $28-$35 per hour, depending on the...Hourly payPermanent employmentTemporary workLocal areaFlexible hours$23 - $25 per hour
Snelling Staffing of Canton Ohio is currently looking for 2 experienced Machinists for a steel mill in Canton, OH. 2 shifts to pick from second shift position 3 PM - 11 PM Mon - Fri Midnights Sun - Thur 11p-7a MUST HAVE EXPERIENCE WITH MILL MACHINIST ...Hourly payShift workNight shiftAfternoon shift- ...dimensional specifications of the mechanical engineered drawings. A Fitter/Welder will be required to determine, from the drawing, where each weld is to be performed, and meet the size and length requirements of each weld specified within the given tolerance allowed. A Fitter...Work experience placement
- ...society. Job Summary Job Description The Welder joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques and operating various welding devices. Interprets blueprints, specifications, diagrams or schematics to determine...Work at officeImmediate startShift work
- ...Nidec Group WelderThe welder joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques and operating various welding devices. Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding...
- ...Student Welder PositionThe Student Welder position provides high school seniors and adult education trade students in welding programs with hands-on welding and fabrication experience in a manufacturing environment. Under close supervision, the Student Welder will assist...Local area
- ...We're Growing and we need YOU! If you have experience MIG welding, we'd like to talk with you. We're a Metal Fabricator with almost 40 years of history! We're a stable, growing company with an appetite for technology in the manufacturing space. If you have experience...
- ...regulations, and hazardous materials management. Pick and Place Automation experience – preferred Laser Cutting, break presses and welding processes. Basic PC skills, CAD, Drafting PLC experience is a plus BS Mechanical Engineer, Manufacturing Engineering, Industrial...Temporary work
$30.3 per hour
Job Description Job Description The Fresh Mark facility in Canton, Ohio, is currently accepting applications for Industrial Maintenance Mechanics for 2nd and 3rd Shifts. Must be hard working, detail oriented, and drug free. Wage and Benefits Starting labor rate...Shift workNight shiftAfternoon shift$26.6 per hour
...troubleshooting, preventative maintenance, and repairs for all hydraulic, electrical, mechanical, and plumbing systems; and will perform welding, machining, and metal fabrication. This position will work outside in varying weather conditions, and SA Recycling strictly...Weekly payWork experience placement- ...Job Description Job Description Precision Sheet Metal Welding Technician Build with precision. Finish with pride. From first tack to final buff, you’ll craft sheet metal weldments that match engineered drawings to the letter—then elevate the appearance to meet cosmetic...Shift workWeekend work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Certified Welding Inspector. Be the first to apply!




