Station Electrician C - A
$31.33 - $34.84 per hourAmerican Electric Power
Station Electrician C-A
Perform all types of work involved in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission and distribution facilities. Assist in responding to emergency call-outs on station trouble and coordinating prompt restoration of service to customers as required.
What You'll Do:
- Work on energized equipment up to 260 volts. After six months in classification, employee shall assist in work on conductors and equipment energized at voltages above 750 volts with direct supervision or assistance of personnel in higher classification
- Select proper prints and/or drawings for various work and have a basic understanding of each.
- Use voltmeters, ohmmeters, ammeters, insulation meggers and other test equipment associated with station work.
- Assist in disassembling and reassembling, inspecting, maintenance, and repairing of station transformers, circuit breakers, portable substations, rotating machinery, network protectors and transformers, air ducts and heat exchangers; install and maintain station batteries; replace nitrogen bottles and air filters.
- Assist in station work such as installing conduit, pipe, cable and wire; use hand lines to pass tools and materials; dig and backfill trenches; remove and spread stone; uncrate equipment and material; install and remove portable substation fences, barriers and safety signs; paint structures and equipment; climb station structures.
- Use various kinds of tapes, insulating materials, protective and insulating paints and varnishes, and understand proper application of each.
- Assist in making visual inspections such as check lights, heaters, circuit breaker counters, oil levels, and bus connections; read gauges such as voltmeters, ammeters, hydrometers, pressure and level gauges; apply start-run-stop tests on emergency generators, water and sump pumps and fire engine motors. Report abnormal conditions.
- Replace lamps, switches, duplex outlets, dry cells; install and maintain signal and communication systems
- Assist in various tests involving oil samples, connecting and operating portable and stationary oil handling equipment. Assist in electrical tests, TTR, Doble, core megger and resistance for transformer testing, etc.
- Assist in station switching including use of radio communication and/or direct instruction from higher classification, assist in checking equipment clearances and making de-energized tests, place grounds as directed.
- Knowledge and proficiency in steel and aerial lift rescue.
- Maintain records and prepare and submit reports as required.
- Attend and participate in training and assist in the training of other employees as assigned.
- Use and operate various company vehicles, specialized equipment, hand and power tools.
- Operate company vehicles, cranes, aerial lifts and specialized equipment. Perform duties incidental to the operation of such equipment
- Use hand and power tools; operate portable generators, blowers and pumps; inspect and store personal protective equipment.
- Knowledge and use of various knots used in station work.
- Perform similar or less skilled work as assigned.
- Assist employees of equal or higher classification; direct the work of employees assigned to assist.
- Become familiar with the Company's safety rules and practices and in the application of resuscitation and First Aid as presented in the Company's Safety Manual.
- Perform duties in accordance with the Company's safety rules and operating regulations and practices.
What We're Looking For:
Station Electrician C:
Education requirements are listed below:
- Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience.
- Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);
- or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another utility or contractor.
Work Experience requirement listed below:
- No previous work experience required.
- Must be available to work overtime, call-out overtime and shift work, as required.
- Travel requirements are expected > 50 % of the time
Station Electrician B:
Education requirements are listed below:
- Two-year associate degree electrical/mechanical/industrial maintenance technology or equivalent education and/or experience.
- Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);
- or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another electric utility or contractor.
Work Experience requirement listed below:
- Minimum of 24 months satisfactory work experience as a Station Electrician C or the equivalent (as determined by the Company through demonstration, examination and performance appraisal).
Licenses/Certifications:
- Valid Class A CDL is required
Station Electrician A:
Education:
- Associate degree in electrical/mechanical/industrial maintenance technology or equivalent education and/or experience.
- Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);
- or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another electric utility or contractor.
Experience:
- Minimum of 24 months satisfactory combined work experience as a Station Electrician B or Station Electrician B-Certified or the equivalent (as determined by the Company through demonstration, examination and performance appraisal).
Licenses/Certifications:
- Valid Class A CDL is required
Physical demand requirements details are listed below:
- Distance in feet to climb and work on a ladder/structure: 50 ft and higher Knowledge of print reading sufficient to interpret and apply information from drawings, instruction manuals, one-line diagrams, and associated documents.
- Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression, or vacate the current classification.
- Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (Station Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company.
- Ability to deal with customers and other employees in a courteous and professional manner.
- Ability to plan work and to properly instruct and brief others.
- Employee shall obtain the appropriate valid commercial driver's license prior to the end of the designated probationary period.
- Must meet all vehicle operation requirements ad designated by federal and/or state law.
- Considerable travel and overtime may be required to complete work assignments.
- Must successfully complete Physical Abilities Test (PAT)
Physical demands required for this job include but not limited to: Minimum Requirement Station Electrician Amount of Weight Lifted from Floor/Ground to Waist Level: 75 Amount of Weight to be Carried for 20 Feet: 60 Amount of Weight Lifted to Chest Level:50Amount of Weight Lifted to Eye Level:30 Distance to Walk Accumulated over the Course of an 8-Hour Shift: Mile Distance in Feet to Climb and Work on a Ladder/Structure:50 and Higher Distance in Feet to Ascend to and Work in a Bucket/Lift:100 and Higher (Tested at 60')Ability to Discriminate between Colors: Yes (Tested)
Drive Time Requirement:
- Successful candidate must live or be willing to relocate within 45 mins of the Hanging Rock Transmission Service Center (2123 County Road 1A Hanging Rock, Ohio 45638)
What You'll Get:
Station Electrician C: $31.33 - $34.84
Station Electrician B: $38.83 - $40.03
Station Electrician A: $58.62
In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support
American Electric Power$65.17k - $121.93k
...in responding to emergency call-outs on station trouble and coordinating prompt restoration... ...the job site. QUALIFIED PERSON - Station Electrician or Supervisor who is knowledgeable of the... ...Job Description Station Electrician C-A: What You'll Do: Work on energized...SuggestedFull timeFor contractorsWork experience placementImmediate startRelocationShift work- ...ore sectors. Danieli Corporation is a division of Danieli and C. SpA headquarters in Buttrio, Italy. Danieli exports its output... ...plans, and a 401(k) plan with employer match. Responsibilities Electricians must be committed to their own personal safety as well as the safety...SuggestedLocal areaWorldwideShift work
- ...Experience with running/bending Rigid and EMT conduit OSHA 10 preferred but not required Experience working alongside a Journeyman Electrician In 1977 Amteck was founded in Central Kentucky with the belief that growth only comes by listening and responding to both clients...SuggestedApprenticeship
- Job Description Location: Toledo, OH Cleveland-Cliffs has an immediate opportunity for a Maintenance Electrical Technician at our Toledo, OH HBI location. The Maintenance Electrical Technician is primarily responsible for performing electrical preventative and corrective...SuggestedFull timeApprenticeshipWork experience placementWork at officeImmediate startShift work
- The maintenance E&I technician performs all operations necessary to install, troubleshoot, modify, calibrate, service and program complex electrical equipment and instrumentation in support of facility operation. Primary expectation is based on routine work originating...SuggestedNight shiftRotating shift
- Cleveland-Cliffs Inc. is hiring a Maintenance Electrical Technician at our Toledo, OH HBI location. The role focuses on electrical preventive and corrective maintenance across processing equipment and infrastructure, including low voltage and instrumentation work as needed...
- ...HPC-Industrial, powered by Clean Harbors, is seeking an Industrial Electrician to install, maintain, and repair electrical systems in an industrial setting. You will troubleshoot problems, perform preventative maintenance, and read schematics to ensure safe, compliant...
- Overview The Instrument and Electrical Technician (I&E Tech) is responsible for safely and responsibly maintaining, troubleshooting, and repairing the instruments and electrical systems in the Hanging Rock polystyrene plant. Primary Responsibilities Responsible for working...RelocationRelocation packageNight shiftWeekend workDay shift
- ...A national electrical contracting leader is seeking experienced Electricians to join their team in Ashland, Kentucky. The role requires extensive electrical experience on commercial or industrial sites, alongside skills such as installing and troubleshooting electrical...
- ...Amteck is seeking a Journeyman Electrician 1 to work under a Foreman or Superintendent, potentially overseeing a small crew. The role covers installation, alteration and repair of electrical systems, with opportunities to learn in other divisions such as low voltage and...
- A national electrical contracting leader in Kentucky seeks Electrical Helpers to support Journeyman Electricians on construction projects. The role offers long-term opportunities, benefits, and the chance to join an accredited apprenticeship program. Candidates should...Apprenticeship
- A leading electrical contracting firm is seeking Electrical Helpers for projects in Shelbyville, TN. Candidates should have at least 2 years of electrical experience in commercial or industrial settings and be familiar with running and bending Rigid and EMT conduit. OSHA...Apprenticeship
$37 per hour
...Job Description Job Description HPC-Industrial , powered by Clean Harbors, is looking for an Industrial Electrician to join their safety conscious team! The Industrial Electrician is responsible for installing, maintaining, and repairing electrical systems and equipment...Full time- ...Amteck is seeking a Journeyman Electrician 1 to work under a Foreman or Superintendent, potentially overseeing a small crew. The role covers installation, alteration and repair of electrical systems, with opportunities to learn in other divisions such as low voltage and...
- ...committed to bringing passion and customer focus to the business. This is a general application for current and future Journeyman Electrician openings with Amteck service departments. Ideal candidates will live within reasonable commuting distance or be willing to...ApprenticeshipRelocationLong distance
- Amteck is currently looking to hire Electricians for our Greenville, SC Service Dept. We offer long-term opportunities as well as steady work, benefits and a 401K. We are looking for people who are interested in working with a company that promotes growth and longevity...Currently hiring
- ...Job Description Job Description We have openings for experienced electricians in Huntington, WV. Some of these jobs are high profile projects. We are especially in need of foreman and supervisory level Journeyman electricians.All of our positions include:Great PayGuaranteed...For contractorsLocal area
$44 per hour
...production facilities worldwide. The company values quality, integrity, trust and hires people who share those values. Job Title Electrician Journeyman - Bismarck, Missouri Plant Job Summary The Electrician Journeyman is responsible for installing, maintaining, troubleshooting...Hourly payTemporary workWorldwideRotating shift$23 - $28 per hour
Job Description Electrical Tech II – Build Critical Infrastructure at Intermountain Electronics \n \n Job Overview: \n \n Company: Intermountain Electronics \n Salary/Pay Rate: $23.00 – $28.00 per hour \n Location: South Point, OH \n Job/Employment...Bi-weekly payHourly payFull time- Discover a more connected career At Dycom Industries, Inc., as a Fiber Splicer, you’ll complete the process of fusing optical fibers, to maintain our telecommunication networks.Your splicing work is essential for keeping strong and reliable connections, ensuring data travels...Work experience placementRemote work
$2,000 per month
...Description: Up to $2000 bonus for qualified and experienced Electricians. Work 4 days a week, no travel, great career development opportunities... ...used in the manufacture and repair of electrical power stations and equipment Troubleshoot and diagnose cause of electrical...Shift workAfternoon shift- Hydro Blaster/Field TechnicianHPC Industrial, powered by Clean Harbors, is looking for a Hydro blaster/Field Technician to join their safety conscious team! This Technician will be responsible for the safe & proper execution of HPC-Industrial jobs across all services lines...16 hoursFull timeShift work
- ...fixtures, structures and other associated equipment under immediate or general supervision as skill level dictates.After completion of C-100, or equivalent experience, shall be competent to perform work on conductors and equipment energized up to 260 volts under general...ApprenticeshipWork experience placementInternshipLocal areaImmediate start
- Everon Job OpportunityAt Everon, we truly believe that our people are the difference – for our organization, the customers we serve and the communities we protect. When you're a part of Everon, you'll have the opportunity to be a part of that difference every day. With...Full timeLocal areaFlexible hoursAfternoon shift
- ...Monday - Friday 6a-230. The selected candidate will be able to work overtime as needed. Up to $2000 signing bonus for qualified electricians. Indoor work, no travel, great benefits and career development opportunities Requirements: Technical 1. Identify and...Relocation packageMonday to FridayShift workDay shift
- Service Technician Dutch Miller of Ashland is family-owned and operated, where we make our employees and customers the high-priority! We are an award-winning family of dealerships. Everyone at Dutch Miller takes great pride in supporting the local Tri-State communities...Local area
- Chrysler, Dodge, Jeep, Ram Service Technician/Mechanic ****EXPERIENCED/MASTER AUTOMOTIVE CDJR SERVICE TECHNICIAN NEEDED**** Weekly Compensation (HOURLY- BASED ON EXPERIENCE OR FLAT RATE - BASED ON EXPERIENCE) Monday through Friday 8-5 (NO WEEKENDS) Health, dental...Hourly payPrice workTemporary workMonday to Friday
$30 per hour
Job Description Loyal Source is looking for a skilled Fire Alarm Technician to work in the Ashland, Kentucky area. The majority of the work will be service tickets, along with some installations. This individual will be responding to service tickets and must feel ...Hourly payFor contractorsFor subcontractorCasual workWorldwideNight shift- ...Amteck, LLC is currently seeking candidates to fill Foreman Electrician openings at our job sites located across the south east United States. Primary Role The Foreman Electrician works under the guidance of a senior level Foreman or Superintendent and will oversee the...Contract workApprenticeshipLocal area
- Overview If you’re a mechanic, check out this opportunity to work with a well-respected, award-winning Contractor that puts their employees first with safety initiatives, great benefits and perks, wellness programs, and an Employee Ownership program where you become part...Full timeFor contractorsWork experience placementDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Station Electrician C - A. Be the first to apply!



