Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

CNC Programmer

American Flowform and Machining

The CNC programmer is responsible for the development, verification, and release of CNC programs for turning and milling of complex aerospace components. The CNC programs must ensure part conformity of the in-process and final dimensional requirements. Analyzes engineering drawings to define configuration of parts and determine type and sequence of machine operations. The CNC programmer works closely with the Manufacturing Engineers and Operators to identify opportunities for improvement and cost reduction in the manufacturing process. Additionally, the CNC programmer is responsible for the creation of CNC programs in support of the new product introduction and product transfer activities. Responsibilities Create CNC programs for turning and milling (3/4/5 Axis) of complex machining of aerospace components. Achieve machining goals of run and set up time to adhere to production metrics and support continuous improvement efforts. Proficient in Mastercam programming for CNC equipment, specializing in CAD modeling and programming of complex surfaces with tight tolerances. Provide clear instructions and tool setup sheets to the operators to successfully run the CNC programs. The individual is required to be a supportive member of Environmental Safety & Health (ESH) and Quality System policies to provide a safe workplace and eliminate conditions and behaviors which may cause work‑related illnesses and/or injuries while delivering quality product and services on time. Basic Qualifications An Associate Degree or Bachelor’s Degree in Engineering is preferred but not required. 5-10 years of machine shop experience. Minimum 5 years of CNC Programming experience. Minimum of 3 years of Mastercam CNC programming experience. Experience in the use of Mastercam for operation simulation. Aerospace experience preferred. Must be a U.S. Citizen due to the nature of the work, compliance with federal contracts, and exposure to ITAR/EAR-regulated technical data. Knowledge, Skills And Abilities Must have extensive shop floor experience with in-depth knowledge of the capabilities and functionalities of milling, turning, and mill‑turn machines. Must be fully versed with initiating and developing CNC programs in Mastercam and working with machine operators to prove‑out the process. Have experience with process planning, operation sheets, tool sheets, creation of set‑up sheets, gauging and measurement systems. Experienced with aerospace alloys, Inconel, and steel machining. Generate numerical control programs utilizing Mastercam programming language for complex machined parts using 3 through 5 axis machine tools. Experience in machining metallic aerospace components. Expert in interpretation of engineering drawings and GD&T. Experience designing manufacturing tooling for the production of metallic structures. Extensive experience in cutting tool technology, applications, and selection. Strong verbal and written communication skills. Proven ability to develop, recommend and implement process and manufacturing improvements. Sense of urgency in problem resolution. Team player with excellent people skills. Candidate must possess the ability to think proactively and work through tactical implementation of major engineering change initiatives. Analytical and results oriented. Ability to multi‑task and detail oriented. Knowledge and experience with Lean tools and continuous improvement methodologies required. Strong familiarity with Microsoft Office products (Word, Excel, PowerPoint) required. Dependability – is willing to work extra hours if needed to get the job done, punctual to meetings and is at work on time. Adaptability – Adapts to changes in priorities or the work environment. Has open mind to others’ ideas and is willing to adapt to changes or try new methods. Work Environment Vibration, or works near moving mechanical parts and high, precarious and congested places Occasionally exposed to risk of electrical shock Work on or near moving mechanical parts Exposed to prolonged risk of loud to moderate noise throughout the day. Hearing protection is recommended in all areas of the shop and is provided by the Company Physical Demands Walk; sit; stand; bend; lift; reach with hands and arms; stoop; kneel; crouch; crawl; use hands to fingers; handle or feel objects; and move continually during working hours Lift over 50 pounds, along with over the head lifting Vision abilities, peripheral vision, depth perception, and the ability to adjust and focus Able to work flexible hours – including over‑time, and weekends to meet customer demands Personal Protective Equipment ANSI rated metatarsal shoes Safety glasses Cut‑resistant gloves Disclaimers Intended to describe the general nature and level of work being performed by employees assigned to this job title. It is not intended to be construed as an exhaustive list of all responsibilities, duties, skills and behaviors of employees in this job. Not an employment agreement or contract. American Flowform and Machining has the exclusive right to alter this job description at any time without notice. Intended to describe the essential functions of the position that a qualified individual must be able to perform, either with or without reasonable accommodation. American Flowform and Machining will provide equal employment opportunities to all applicants without regard to applicant’s race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability status, or any other status protected by federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested. #J-18808-Ljbffr

Vacancy posted 2 days ago
Similar jobs that could be interesting for youBased on the CNC Programmer in Billerica, MA vacancy
  •  ...CNC Lathe ProgrammerWe are seeking an experienced CNC Lathe Programmer to support precision manufacturing operations. This role involves programming, setting up, and operating CNC lathes to produce high-quality parts and components. The position requires strong knowledge... 
    Suggested

    Talnt LLC

    North Billerica, MA
    3 days ago
  •  ...Our client, a precision metals manufacturing facility, has an immediate need for an experienced CNC Machinist & Programmer , to join our winning team in Billerica. KEY RESPONSIBILITIES Program, setup and operate computer numerically controlled (CNC) machine tools... 
    Suggested
    Full time
    Immediate start

    Elgen Staffing

    Billerica, MA
    20 hours ago
  •  ...CNC Machinist/ProgrammerOur long term client is a growing manufacturing company specializing in precision machining and fabrication. They are currently seeking an experienced CNC Machinist/Programmer to join their team. If you are a skilled professional with a strong background... 
    Suggested
    Shift work

    SkillSource Tech

    Tewksbury, MA
    16 hours ago
  • $30 - $42 per hour

     ...the aerospace, medical device, robotics, and defense industries. About the Role We are seeking a skilled, independent CNC Programmer to join our team. In this role, you will play a critical part in our manufacturing process by developing programs and writing code... 
    Suggested
    Hourly pay
    Contract work
    Worldwide
    Flexible hours

    Orion Casting

    Billerica, MA
    3 days ago
  • $36 - $41 per hour

     ...Job Description Job Description Adecco is currently assisting a local Customer in their search for CNC Programmer positions in Wilmington, MA. This is a great opportunity to further your existing skills as a CNC Programmer , while learning new ones to assist you... 
    Suggested
    Hourly pay
    Temporary work
    Local area
    Shift work
    Day shift

    Adecco

    Wilmington, MA
    23 days ago
  • $70k - $75k

     ...CNC Machinist Location: Wilmington, MA Schedule: Monday–Friday, 8:30 AM–5:00 PM Flex Hours: Available once fully trained. Salary: $70,000–$75,000 per year, depending on experience Employer: FootBridge Position Summary FootBridge is seeking an experienced CNC Machinist... 
    Work at office
    Monday to Friday
    Flexible hours

    FootBridge

    Wilmington, MA
    16 hours ago
  •  ...CNC Programmer/MachinistWe have an immediate opening for a skilled CNC Programmer/Machinist with at least 6 years of experience. We are looking for a fast-paced, motivated candidate who delivers quality parts on schedule. Candidate must have proven experience with Mastercam... 
    Temporary work
    Work experience placement
    Immediate start

    NESC Staffing Corp.

    Lawrence, MA
    3 days ago
  •  ...Position Summary The CNC Machinist I Produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. The role requires the above to be accomplished within... 
    Contract work
    Apprenticeship

    Tecomet

    Burlington, MA
    4 days ago
  • $20 - $30 per hour

     ...Adecco Staffing is currently partnered with a growing manufacturer in Watertown, MA! We are seeking a skilled CNC Setup Machinist. This is a direct hire opportunity on 1st shift. Job Title: CNC Machinist with Swiss Machine experience Pay Range: $20 – $30 per hour depending... 
    Hourly pay
    Temporary work
    Local area
    Monday to Friday
    Shift work
    Day shift

    Adecco

    Wilmington, MA
    4 days ago
  •  ...CNC Machinist II The CNC Machinist II produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. The role requires the above to be accomplished within... 
    Contract work
    Apprenticeship

    Tecomet

    Wilmington, MA
    4 days ago
  •  ...Position Summary We are looking for a 2nd or 3rd shift CNC Machinist with 3+ years of experience. A CNC Machinist II produces machined parts by operating a computer numericalcontrol (CNC) machine; maintaining quality and safety standards; keeping records; maintaining... 
    Contract work
    Night shift
    Afternoon shift

    Orchid Orthopedics

    Wilmington, MA
    20 hours ago
  • $18 per hour

     ...Acton, MA Pay Range: $18–$26 per hour (Based on experience) Shift: 1st shift Job Summary: We are currently seeking a CNC Operator to join our team in a specialized optics manufacturing environment. This role involves operating and programming a variety of... 
    Hourly pay
    Full time
    Temporary work
    Local area
    Shift work
    Day shift

    Adecco USA

    Burlington, MA
    4 days ago
  • $27 - $32 per hour

     ...Adecco Staffing is working with a manufacturing company in Nashua, NH to bring on a CNC Machinists for 2nd shift. This is an urgent need, and the team is looking for experienced machinists who are comfortable with multiple machine setups per shift and working in a fast... 
    Hourly pay
    Temporary work
    Local area
    Shift work
    Afternoon shift

    Adecco USA

    Burlington, MA
    3 days ago
  •  ...Bonus after 90 days! About Plastic Distributors & Fabricators, LLC (PDF) PDF is an ISO 9001 certified manufacturer specializing in CNC machined, fabricated, and thermoformed plastic components, as well as precision hardware integration. We are committed to quality,... 
    Hourly pay
    Immediate start
    Relocation package
    Weekend work
    Day shift
    Afternoon shift

    Altamira Material Solutions

    Tewksbury, MA
    2 days ago
  • $75k - $110k

     ...CNC MachinistCooling performance limits high-power computing, semi-conductor fab, cell networks, photonics, power electronics, and most of our digital world. Alloy Enterprises enables customers to break through these constraints with novel complex metal components that... 
    H2b
    H1b
    H-2A Visa
    Work visa

    Alloy Enterprises

    Burlington, MA
    3 days ago
  • $80k - $100k

     ...CNC Programmer will be responsible for creating multi-axis CNC programs (3, 4, and 5 axis) for aerospace components. This individual will work closely with engineering, production, and quality teams to ensure efficient and accurate machining processes that meet tight... 
    Full time

    Tech Edge Networks

    Lowell, MA
    2 days ago
  • $18 per hour

     ...Adecco Staffing is working with a manufacturing company in Nashua, NH to bring on CNC Machine Operators. This is a full-time, temp-to-hire opportunity with growth potential across multiple shifts. Position: CNC Machine Operator Shift: ~1st Shift – 7:00 AM – 3:00... 
    Hourly pay
    Full time
    Temporary work
    Local area
    Shift work
    Night shift
    Day shift
    Afternoon shift

    Adecco

    North Billerica, MA
    4 days ago
  • $19 - $27 per hour

     ...Billerica, MA Shifts Available: 1st Job Type: Full-Time, Temp-to-Hire Pay : $19 - $27 per hour Overview: Adecco is hiring CNC Operators for a leading precision machining company in Billerica, MA! This is a fantastic opportunity to join a well-established,... 
    Hourly pay
    Full time
    Temporary work
    Local area
    Shift work

    Adecco

    Billerica, MA
    14 days ago
  • $50 per hour

    6 days ago Be among the first 25 applicants Are you a skilled CNC Programmer with a passion for precision and innovation? We're looking for a CNC Programmer with at least 5 years of experience to join our manufacturing team and take ownership of programming, tooling, and... 
    Contract work
    Temporary work
    For contractors
    Work at office
    Local area

    Jobs via Dice

    Woburn, MA
    2 days ago
  • Tecomet is seeking a CNC Machinist I to support precision manufacturing of orthopedic, medical device, and aerospace components. In this role, you will set up and operate CNC equipment, interpret blueprints, load tools and fixtures, and monitor machining operations to meet... 

    TECOMET

    Billerica, MA
    4 days ago
  •  ...and legacy materials fabrication, precision laser services, and critical component assembly. We are looking for an experienced CNC Programmer to formulate programming and interact with operators and sales to optimize processes. A Qualified candidate is someone driven to... 
    Flexible hours

    Accumet Engineering Corp

    Westford, MA
    20 hours ago
  •  ...and more sustainable system that empowers people to live better. Come build it with us. WHAT WE'RE LOOKING FOR We are seeking a CNC operator with experience in operating and maintaining CNC machinery. The ideal candidate will have a background in operating CNC... 
    Visa sponsorship

    Reframe Systems

    Billerica, MA
    4 days ago
  •  ...and conventional fabrication technologies and experience with the programming, set-up, and operation of computer numerical control (CNC) milling machines and lathes Knowledge, proficiency, and experience with Mastercam Computer Aided Manufacturing (CAM) software... 
    Work experience placement
    Internship
    Local area

    The MITRE Corporation

    Bedford, MA
    4 days ago
  • $35 - $50 per hour

     ...programming, setting up and running jobs — not simply operating established programs. Location: Billerica, MA Job Title: Senior CNC Machinist Pay Range: $35 - $50 per hour, depending on experience Schedule: Full Time 40 hours per week Monday – Friday Job... 
    Hourly pay
    Permanent employment
    Full time
    Temporary work
    Local area
    Monday to Friday

    Adecco USA

    Burlington, MA
    21 hours ago
  • $30 per hour

     ...Job Description Job Description Responsibilities: Setup and operate CNC lathes and/or milling including tooling, workholding, and machine offsets Interpret complex drawings, GD&T, and 3D models to plan machining strategies. Select appropriate tooling, speeds... 
    Permanent employment
    Temporary work
    Monday to Thursday
    Day shift
    Afternoon shift

    Personnel People

    Billerica, MA
    6 days ago
  •  ...Position Summary The CNC Machinist III produces machined parts by operating, setting up computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.  May be required to perform some programming... 
    Contract work
    Apprenticeship
    Day shift

    Tecomet

    Wilmington, MA
    21 hours ago
  • $67.9k - $101.3k

     ...Sr CNC Machinist Description Build Precision. Drive Innovation. Advance Your Career. We are seeking an experienced CNC Machinist to join our advanced prototype and precision manufacturing team. This role supports low-volume, high-mix production for aerospace,... 
    Full time
    Local area
    Relocation
    Flexible hours
    Shift work
    Day shift

    Textron

    Wilmington, MA
    20 hours ago
  • As a CNC Machinist III at Tecomet, you will set up, operate, and troubleshoot complex CNC equipment to produce high-precision medical and aerospace components. You’ll interpret blueprints and CAD models, select tooling and fixtures, and perform in‑process inspections using... 

    TECOMET

    Burlington, MA
    4 days ago
  •  ...preferred. Responsibilities: - Set up, operate, and monitor Swiss CNC machines (Tsugami, Citizen) - Read and interpret blueprints,...  ...and optimize production runs - Partner with engineers and programmers on process improvements Qualifications: - 3+ years of... 

    gpac

    Burlington, MA
    4 days ago
  • $42.5 - $52.54 per hour

     ...420 Pay: $42.50 – $52.54/hour Job Type: Full Time Relocation Assistance: Available Experience: 5+ years Machines: CNC lathe with live tooling (DMG Mori NLX 2000SY a plus) Controls: Celos (experience a plus) Software: CAM and 2D/3D CAD Why this... 
    Hourly pay
    Full time
    Relocation package

    MIT Lincoln Laboratory

    Lexington, MA
    a month ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to CNC Programmer. Be the first to apply!