CNC Mill Machinist - Setup - 1st Shift
$30 - $36 per hourBabbitting Service Inc
Pay range: $30.00 to $36.00 DOE
Job Type: Full-Time,
Shift Hours: 7:00 am to 3:30 pm
Benefits: Comprehensive Benefit Package**
BSI participates in E-Verify
Established in 1961, Babbitting Service, Inc. (BSI) is a leader in the manufacture, design, and repair of Hydrodynamic Fluid Film Bearings (Babbitt-Lined Bearings) and related components. BSI serves OEMs, aftermarket customers, and end users across the globe.
BSI is looking for skilled CNC Mill Machinists who can work independently in our high-mix, low-volume job-shop environment.
This is not an apprentice-level or production-operator position. We need skilled machinists who can independently set up and run CNC mills, write and edit CNC programs at the machine control, manage tooling and offsets, inspect their own work, and recognize and correct machining problems.
We are looking for experienced CNC machinists. Demonstrated machining ability, judgment, and problem-solving skills matter more to us than a specific number of years in the trade.
CNC Mill Machinist Job Responsibilities:
- Set up and run Haas CNC mills.
- Write, edit, and adjust CNC programs at the machine control as needed.
- Understand and select the correct tooling, tool holders, and workholding for the work being performed.
- Set and adjust tool and work offsets.
- Produce parts within required tolerances and specifications, commonly around .001" and occasionally as close as .0005".
- Measure parts for conformance to specifications using micrometers, calipers, dial indicators, gauges, and other appropriate measuring instruments.
- Adjust machine speeds and feeds and change cutters or inserts as needed to machine parts properly and efficiently.
- Verify part dimensions after tooling, insert, offset, or program changes.
- Identify problems and make appropriate corrections as needed.
- Keep the work area safe, clean, and organized.
**Benefits:
- 401(k)
- 401(k) matching
- Profit sharing
- Dental insurance
- Health insurance
- Vision insurance
- Paid time off
- Referral program
- Tool loan program
- Tuition reimbursement
- Previous CNC mill machining experience sufficient to perform the position independently.
- Ability to read and interpret part drawings, dimensions, tolerances, and surface-finish requirements.
- Proficiency with common precision measuring instruments, including micrometers, calipers, dial indicators, and gauges.
- Working knowledge of practical machining math.
Preferred Experience
- Haas CNC mills and controls, including 3 and 4 axis.
- High-mix, low-volume or job-shop machining.
- GD&T knowledge and experience.
- Renishaw probing systems.
Compensation details: 30-36 Hourly Wage
PIcf513b0910ed-38059-41332454
$28 - $32 per hour
...precision machining shop in Elgin, IL. On our 1st shift team, you’ll take full ownership of setups and production on CNC lathes or mills, building high-accuracy components for a... .... Open Roles (1st Shift)CNC Lathe Machinist Pay: $28–$32/hr, based on experience....Day shiftHourly pay$29 - $36 per hour
Description: CNC Lathe Machinist Job Description We seek an experienced CNC Lathe Machinist... ...CNC Lathe Machinist Requirements: Shift: 7:00 am to 3:30 pm Experienced in setting... ...: Previous CNC lathe machining and setup experience with a minimum of 5+years'...Day shiftHourly payShift work- ...manufacturing opportunities are available for CNC Machinists across the Elgin and Elk Grove Village... ..., from CNC operators to experienced setup machinists and programmers. Opportunities... ...Set up and operate CNC mills, lathes, and other machining equipment....Suggested
$28 - $40 per hour
...Overview We're hiring CNC Machinists at all experience... ...directly into independent setups, troubleshooting,... ...to develop across CNC mills, turning centers, mill-... ...Earning Potential: 15% shift differential plus optional... ...shift) Shift ~1st shift: Monday - Friday...Day shiftApprenticeshipRelocation packageMonday to FridayShift workAfternoon shift$24 - $32 per hour
...Tek is seeking an experienced CNC Lathe Machinist to join our manufacturing... ...from you. Schedule ~1st Shift ~7:00 PM - 3:30 PM ~ Overtime... ...• 3-5 years of CNC lathe setup experience • Experience... ...• Understanding of CNC milling processes Salary Description...Day shiftFull time- ...Job Description Job Description Job Title: CNC Mill and Lathe Machinist-1st shift Location: Elgin, IL Job Type and Duration: Direct Hire Pay rate: 24-30/HR 7am-3:30pm Description Set up and operate CNC Mills and Lathes. Plan, construct, alter and repair...Day shift
- ...CNC SetupSeeking an experienced CNC Setup Person to set up, operate, troubleshoot, and optimize a variety of CNC machining and fabrication equipment used... ...standards.Set up and run Takumi and Hurco CNC mills, Bridgeport mills, and a Mega Gundrilling machine to produce...
- ...CNC Swiss Programmer/Setup MachinistWe are working with a client company in the greater Chicago Metro region who is seeking a CNC Swiss Programmer/Setup Machinist. Must have CNC Swiss experience.Key ResponsibilitiesPerform machine setups by loading raw materials, selecting...
- ...CNC Swiss Programmer/Setup Machinist We are working with a client company in the greater Chicago Metro region who is seeking a CNC Swiss Programmer/Setup Machinist. Must have CNC Swiss experience. Key Responsibilities Perform machine setups by loading raw...
- ...CNC Milling MachinistWe are working with a client company in the Chicago Metro Region seeking a CNC Milling Machinist (multiple shifts). This position will offer regular overtime with a growing company that has been in business for over 100 years! Prior experience working...Permanent employmentShift work
- ...Manufacturing Company] is seeking a CNC Machinist / Grinder to program, set up, and operate CNC mills, lathes, and grinders to produce... ...programming in CAM Able to setup and run concurrent jobs on multiple... ...4 day work week First Shift Occasional Overtime AMBAC is a global...Day shiftTemporary work
- ...CNC Machine OperatorAbrasive Form LLC Bloomingdale - Bloomingdale... ...Position Type Full Time Job Shift 1st Shift Education Level High School... .... We use high precision CNC milling, electrical discharge machining... ...areas of responsibility for setup and machining of parts on 3-axis...Day shiftHourly payFull timeLocal areaImmediate startShift work
$27 - $35 per hour
...Description Job Description Machinist I – Production CNC Set-up and Operator (Direct Hire | 1st Shift | On-site) If you take pride in dialing in CNC setups and turning complex prints into quality... ...horizontal and vertical mills and lathes—while performing in-process...Day shiftHourly payTemporary workFlexible hours- ...CNC MachinistSets up programs, and operates CNC lathes, Numerical Control (NC), and other precision machining equipment to manufacture... ...specifications. Performs a variety of machining duties including machine setup, tooling adjustments, quality inspections, and production...
$25 - $32 per hour
.... We’re looking for CNC Machinists who have a foundation in... ...primarily with CNC mills and lathes, including 3... ...opportunities to progress into setups and more advanced... ...- 28 / hr (base) ~15% shift differential (on 2nd shift... ...Friday Shift ~1st Shift: Monday - Friday...Day shiftApprenticeshipRelocation packageMonday to FridayShift workAfternoon shift$35 per hour
...Description Job Description Overview CNC Setup Programmer – DMG MORI Big Bolt LLC |... ...Type: Full-Time | Onsite Schedule: Day Shift | 8-Hour Shift Bring Your Setup and Programming... ...Experience with CNC turning and/or milling. Ability to read engineering...Day shiftHourly payFull timeRelocation package- ...Responsible for setting up and operating CNC machine tools to produce high-quality precision... ...CNC machine tools including lathes mills grinders and/or EDM (Electrical Discharge... ...software such as Mastercam. Perform machine setups tool changes and adjustments to achieve...Day shiftFull time
- ...Vertical Cnc Machinist (Swiss Machines)We are working with a client company seeking a Vertical... ...****@*****.*** Responsibilities:Setup and Operation: Set up, calibrate, and... ...experience operating CNC machinery (mills, lathes) or technical training in CNC machining...
$19.22 - $39.96 per hour
...CNC MachinistAt Tesla Elgin, we design, fabricate, and build custom... ...seeking an experienced CNC Machinist to join our dynamic team, where... ...the expectation is excellence.Shift: 04:00PM - 12:30AM; Monday... ...understanding of CNC controls, mills, lathes, programming, and manual...Hourly payFull timeFlexible hoursShift work$19.22 - $39.96 per hour
...CNC Machinist At Tesla Elgin, we design, fabricate, and build custom automation equipment... ...Tesla and the expectation is excellence. Shift: 04:00PM - 12:30AM; Monday through... ...detailed understanding of CNC controls, mills, lathes, programming, and manual fabrication...Hourly payFull timeTemporary workMonday to FridayFlexible hoursShift work- ...Description Position Summary The CNC Machine Set-Up II is... ...position performs complex machine setups with general supervision and... ...operating CNC lathes and CNC Mills (Mazak) ~ Ability to read and... ...overtime, weekends, or alternate shifts when business needs require....Shift workWeekend work
$20 - $30 per hour
...Job Description Job Description CNC Swiss Machinist Join a clean, climate-controlled manufacturing facility where you'll set up and operate... ...safety standards are met What We're Looking For: CNC setup and operation experience, preferably with Swiss lathes...Weekly payContract workTemporary work$20 - $30 per hour
...Job Title: CNC Machinist (Swiss Lathe) Job Description This role focuses on setting... ...from blueprints and schematics for machine setup and production. Proficiency in CNC... .... Ability to work effectively on 2nd shift and maintain consistent attendance and reliability...Weekly payFull timeContract workTemporary workSeasonal workAfternoon shift$25 - $40 per hour
...Description Superior Staffing in Addison IL, is seeking for a CNC Machinist Operator for one of our clients located in Hanover Park and... ...MUST ~ Pay Rate- $25.00 to $40.00 Depending on Experience ~1st. shift and 2nd. shift Available. If interested? Please...Day shiftTemporary workAfternoon shift- ...our shop has transformed into a machinist's toy land. Full 5-axis... ...advance their abilities in the CNC machining field through on the... ...available. Job Description: ~ Setup, program CAM and run 3 and 5-... ..., programming and running CNC milling machines Minimum 5 years work...Full timeWork experience placement
- ...Looking for Experienced Machinist (with Prototype Experience) Job Summary: Responsible... ...operate a variety of machine tools including CNC mills lathes and manual machines to produce... .... Document machining processes setup instructions and program modifications for...Full time
$25 - $35 per hour
...assembly. Founded in 1978, we are looking for an experienced Milling CNC Programmer/Operator to help with programming, setting up, and... ...repairs, and engineering changes. Document programming revisions, setup information, tooling requirements, and inspection results....Hourly pay- ...individuals with 3-5 years Experience Mazak Setup Program (Mazatrol Control) Air-... ...Care Insurance as well as paid Holidays 1st shift position 7 am-5 pm with OT Monday-Friday... ...Responsibilities Operate and Program CNC Mazak Quick Turn, to manufacture Cores and...Day shiftMonday to Friday
- ...Aerotek - - Responsibilities: Set up and operate Swiss CNC machinery to meet production requirements; Read blueprints and schematics to configure machines; Perform machine changeovers at the controller; Monitor machine operations and adjust settings for quality and efficiency...
- ...Kelly Services, Inc. - - Responsibilities: Set up and operate CNC milling machines, manual mills, and lathes; Read and interpret drawings and 3D models; Apply Mastercam and G-code to machining programs; Inspect parts with micrometers and calipers to verify quality; Adjust...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to CNC Mill Machinist - Setup - 1st Shift. Be the first to apply!
- part time morning South Elgin, IL
- part-time 1st shift South Elgin, IL
- morning stock South Elgin, IL
- full time 1st shift South Elgin, IL
- morning South Elgin, IL
- 1st shift South Elgin, IL
- morning shift South Elgin, IL
- night shift day shift South Elgin, IL
- early morning shift South Elgin, IL
- part time morning shift South Elgin, IL



