Welding / Mechanical Inspector
$45 - $50 per hourSGS North America
Welding / Mechanical Inspector
We are SGS – the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world.
Job Description
SGS is currently looking for a Welding/Mechanical Inspector for some contract work in Casper, Wyoming and San Diego, CA. This is not a full-time contract but some intermittent quality assurance work which will vary based on the projects. This project will start in June 2026.
Scope of work:
- Responsible for inspecting, testing, and evaluating weld processes, welding, pressure vessels, heat exchangers, Expansion joints, and related equipment to ensure compliance with applicable codes, safety standards, and regulatory requirements.
- Verify compliance with ASME, API, NBIC, Federal, state & Local regulations.
- Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components
- Inspecting welds, reviewing welding procedures, and conducting visual and dimensional inspections
- Examining completed welds for size, quality, and conformance to standards.
- Perform in-service inspections, turnaround inspections, and risk-based inspections (RBI).
- Conduct visual inspections of welded joints, checking dimensions, penetration, and bead formation.
- Witness non-destructive testing (NDT) and interpret / verify results.
- Visual inspection on the quality of welding and mechanical projects.
- Prepare detailed reports documenting inspection results, including any issues found.
- Observing welders and preheating procedures
- Recording inspection results and any non-conformities
- Investigating Non-Conformities i.e. identifying causes and assisting in corrective actions.
Ability to communicate effectively with welders, engineers, and other personnel
Qualifications
- At least one of the following: AWS CWI, API 510, API 570
- Minimum of five (5) years industrial welding-related inspection experience. Two (2) of these years should be in Quality Assurance / vendor surveillance / shop inspections
- Industrial experience in Oil & gas / Power & Utility / Construction / Manufacturing, etc..
- Experienced in inspecting welds on various manufactured products eg. pipelines, expansion joints, pressure vessels, heat exchangers and other equipment
- Experienced in witnessing NDE test (UT, PT, MT, RT, etc..) and verifying test reports.
- Work Schedule: Intermittent i.e. when & where required subject to job requirement
- Pay Rate: $45 / hr. to $50 / hr.
- Per diems: Expenses will be covered at cost if inspection site is beyond round trip 200 miles from Inspector place of residence and requires overnight stay at hotel.
Additional Information
SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call View phone number on click.appcast.io for assistance and leave a message. You will receive a callback. Please note, this phone number is not for general employment information but is only for individuals who are experiencing difficulty applying for a position due to a disability.
Job Location
I'm interested Privacy Notice
$48 - $55 per hour
...Overview: The Quality Inspector will report directly to the site Quality Manager, with indirect oversight from the Sr. Quality... ...soils and concrete testing, asphalt paving, structural steel, mechanical, welding and general construction observations. Methodical and...MechanicalHourly payFull timeTemporary workWork experience placementWork at officeLocal areaFlexible hoursShift work$21 - $25.5 per hour
...Qualifications ~2-3 years of experience in a process control or certification laboratory testing environment ~ Diploma or Degree in Mechanical, Chemical, Material Engineering. ~ Familiarity with lab testing equipments, customer requirement and general specification e.g...MechanicalHourly payAfternoon shift$20 - $49 per hour
...Position Location: Chula Vista, CA Summary: Sheet metal mechanics are responsible for the layout, fabrication and installation of... ...prefabricate, fit, install sheet metal structures in position for welding or riveting or other methods of mechanical fastening. Sheet...MechanicalTemporary work- ...up test equipment using hand tools or automatic test methods to perform routine tests of circuits, components, instruments, and mechanical assemblies. Executes manual and automated test plans as defined and reproduces and debugs routine issues. Top 5 Skills Proficiency...Mechanical
- Job ID: 20710468Reference Number: 23-01713Title: Mechanical EngineerLocation: San Diego, CAPosted Date: 2023-10-24Contact: Deepak KumarContact Email: ****@*****.*** Phone: (***) ***-****Company: HAN Staffing Scope of Work: Review and document engineering...Mechanical
- ...ApplicationsEmail: ****@*****.*** PR Range: 47.50-59.25/hr DOEPosition Summary: Seeking a design-focused Mechanical Engineer to develop new fixtures and sub-systems and improve existing test platforms. This hands-on role requires an engineer who...MechanicalWork experience placement
$121.79k - $158.32k
Job Posting This vacancy announcement may be used to fill positions at various Department of the Navy Commands, including but not limited to the Naval Facilities Engineering Systems Command. Pay Ranges: Washington DC: $121,785 - $158,322 Per Year Honolulu ...Mechanical- DescriptionThe Mechanical Engineer will work on project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline airports, institutional, industrial, manufacturing...MechanicalContract workWork at office
$33.76 - $37.11 per hour
...is required. Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of... ...respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $33.76 - $3...MechanicalHourly payLocal areaFlexible hoursShift work$33.76 - $37.11 per hour
...is required. Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of... ...respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $33.76 - $3...MechanicalHourly payLocal areaFlexible hoursShift work$25 - $30 per hour
...The general purpose of this position is to layout and weld simple to complex components and/or structures while meeting all safety... ...Ability to take directions and follow instructions Good mechanical aptitude with ability to produce consistent quality Ability...MechanicalWork experience placementShift work- ...responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and... ...by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard...MechanicalPermanent employmentWork at officeLocal areaShift work
$33.76 - $37.11 per hour
...Security Clearance: No Clearance required Job Summary Welds shell plating, fabricated cast or forged components according to... ...difficulties. Exposure to constantly moving machines, mechanical parts, and high levels of constant noise. PAY SCALE $33....MechanicalHourly payLocal areaFlexible hoursShift work- ·Our Client seeks a mechanical engineer to join our hardware development team. This role targets a designer and builder capable of owning the full lifecycle of physical hardware — from concept through manufacture — across a range of enclosure, packaging, and drone integration...Mechanical
$26.26 - $32.53 per hour
...Welder II in San Diego, CA. Summary: Performs various welding processes to repair, for fabricating, installing, and maintaining... .... Duties and Responsibilities: ~ Utilize standard mechanic's tools, ship fitting and welding equipment and tools, wood shaping...MechanicalHourly payFull timeLocal areaNight shift$17.97 - $47.77 per hour
...Clean Harbors San Diego, CA is looking for a Diesel Vehicle Mechanic to join their safety conscious team! This position will be responsible for the repairs and preventative maintenance of all company owned fleet. Why work for Clean Harbors? Health and Safety is...MechanicalFull time$21.83 - $38 per hour
...Description Position Location: Chula Vista, CA Summary : Using welding/cutting equipment and various power and hand tools, the welder... ...materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and...MechanicalTemporary work- ...Senior Mechanical Engineer Our client in San Diego, CA is seeking a Senior Mechanical Engineer with GD&T skills and Solidworks. Join an industry pioneer to design innovative fixtures and test systems in a highly collaborative, cutting-edge environment. 4 month contract...MechanicalContract work
$160k - $190k
...a minimum of 5+ wastewater treatment facility designs (new or expansion).Considered an expert in CaliforniaB.S. Degree in Civil, Mechanical, Chemical, or Environmental Engineering, M.S. Degree preferred. Registered Professional Engineering California (or ability to apply...MechanicalHourly payFull timeWork at officeLocal area1 day per week$115.45k - $168.17k
...commissioning services, we specialize in highly technical buildings and the systems that bring them to life. We are seeking a Supervising Mechanical Engineer to join our team in San Diego, CA office. As a Supervising Engineer, you will be responsible for representing the Firm...MechanicalFor contractorsWork at officeRemote workWork from homeFlexible hours$83.4k - $125.2k
...future manufacturing requirements and potential improvements.Basic Qualifications for Level 2:Bachelor’s Degree in Aerospace or Mechanical Engineering and 2+ years of experience as a Manufacturing Engineer, Master’s Degree and 0+ years of experience.Experience must include...MechanicalFull timeRelocation packageShift work$104.95k - $152.43k
...information and communication technology, architectural lighting, vertical transportation, and commissioning. We are seeking a Senior Mechanical Engineer to join our team in San Diego. Your experience working in a consulting firm on healthcare projects will ensure your...MechanicalFor contractorsWork from homeFlexible hours- ...discipline across the production environment. Required Qualifications: Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Aerospace Engineering, or a related field; hands-on experience supporting shop floor manufacturing operations;...Mechanical
- ...Chain, and Program Management to support commercialization milestones. Qualifications ~ BS/MS in Electrical, Manufacturing, Mechanical, Biomedical Engineering, or related field. ~7+ years of manufacturing engineering experience in regulated medical devices. ~...MechanicalContract work
$107.9k - $195.05k
...systems engineering and test-and-evaluation activities as assigned.Basic Qualifications:Bachelor’s degree in naval architecture, mechanical engineering, systems engineering, ocean engineering, or a related technical discipline.At least 10 years of progressively responsible...MechanicalFull timeFor contractorsOverseas- ...Attitude/ Customer Centric/ Inter-team Coordination Bachelor of Science Degree in Engineering/appropriate technical discipline (Mechanical/ Aerospace/ Civil) Static/ Fatigue Analysis on Composite and Metallic Aerospace Structural Components. Stress Analysis experience...Mechanical
$87.1k - $157.45k
The Leidos Undersea Systems Division (USD) team currently has an opening for a Mechanical Engineer supporting NIWC Pacific. This is an exciting opportunity to use your experience helping the NIWC Pacific mission in the design, development, and deployment of payloads, UUV...MechanicalFull timeWork at officeNight shift- ...seeking a Project Engineer to join the Project Engineering Team. The role focuses on the design, development, and testing of electro‑mechanical products, with hands-on CAD work and testing of prototypes. Collaboration with Sales, Marketing, and Operations is essential. The...Mechanical
- ...Job Title Mechanical Engineer Duties You will execute in-house mechanical engineering design work products and services within specified milestones and quality standards. You will analyze / design extensive engineering alterations and modifications to existing...MechanicalContract workFor contractors
- ...ProductionCAD/SolidWorksStatistical Process Control (SPC)Education:A bachelor’s degree (required), master’s or advanced degree (desired) in Mechanical/Electrical/Industrial/Manufacturing/Systems Engineering or Physics/Materials Science.About US Tech Solutions: US Tech Solutions...Mechanical
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Welding / Mechanical Inspector. Be the first to apply!
- mechanical installation San Diego, CA
- mechanical foreman San Diego, CA
- mechanical sales San Diego, CA
- mechanical commissioning San Diego, CA
- mechanical design San Diego, CA
- offshore mechanical San Diego, CA
- entry level mechanical design San Diego, CA
- mechanical solidworks San Diego, CA
- mechanical inspector San Diego, CA
- entry level welding inspector




