Engineering Equipment Operator
U.S. Fish and Wildlife Service
Summary
You will serve as a Engineering Equipment Operatorwith US Fish and Wildlife Service.
This position is a Engineering Equipment Operator WGworking in Corvallis Oregon for the R1-Willamette Valley National Wildlife Refuge Complex.
Pay will vary based on grade level and/or duty location for which youre selected. First time hires to the Federal government normally start at the step 1 rate.Duties
As a Engineering Equipment Operator (WG-10) your duties may include but are not limited to the following:
- Operate a variety of gasoline- or diesel-powered heavy engineering and construction equipment-such as bulldozers excavators road graders skidsteers and loaders-to perform earthmoving and grading tasks across varied terrain such as flat hills steep slopes grades rolling surfaces rocky or soft grounds and forests.
- Operate motor vehicles-such as truck-and-trailer combinations platform trucks fuel trucks stake trucks and dump trucks-typically exceeding 32000 lbs GVW to transport equipment and materials safely across project sites.
- Operate heavy equipment safely and precisely near buildings towers trees drop-offs waterlines vertical drop-offs rocks levees dams canals and other structural or natural obstacles.
- Operate crawler tractors and similar equipment on flat or rolling terrain to grade surfaces compact soils and/or spreading surfacing materials to exact specifications.
- Conduct disking chopping mowing rototilling digging loading and rough-grade leveling to support ditch cleaning culvert installation and various other purposes.
- Performs preventive maintenance inspections servicing and minor repairs on heavy equipment construction equipment and/or motor vehicles maintaining accurate logbooks and records in the approved system.
- Adjust equipment attachments for proper position level angle and depth while equipment remains in motion without stopping the power unit.
- Use electrical mechanical carpentry plumbing welding painting or other trades skills to maintain repair or construct a variety of buildings or structures and items such as signs fences frames etc.
Physical Effort: Very strenuous heavy physical effort is required in the operation and frequent adjustment of large pieces of equipment and attachments often under adverse operating conditions. Location of the controls and attachments frequently requires work in awkward or strained positions. Additional physical requirements may be required due to facility maintenance assignments and tasks regarding ladders confined spaces lifting stooping bending twisting etc. Considerable energy is needed working in small confined spaces or elevated areas and operating equipment over rough surfaces. Work normally requires extensive standing walking kneeling and bending. Lifts carries and sets up parts equipment and objects or loads up to 50 pounds unassisted and up to 100 pounds with assistance..
Working Conditions: Work is accomplished both in an office setting (5%) and outdoors (95%). Due to operations of large and complicated equipment often in rough terrain the operator is exposed to injury resulting from equipment overturning and is subject to noise vibration dust fumes grease dirt and moving parts of equipment and machinery. Work performed outside is in a variety of settings where steep terrain extremely uneven rocky and slippery footing is normal. Temperature extremes are common. Employee is regularly exposed to the possibility of shock cuts scrapes and bruises falls falling material or injury from equipment associated with power equipment or hazardous materials. Work demands conformance to safety requirements including the use of a variety of personal protective equipment such as: protective clothing hardhats hearing protection safety glasses goggles gloves steel toe heavy leather boots respirator and other personal protective items. Serious injury may result from getting caught in operating equipment or from collisions with automobiles when operating on or near public roads.Requirements
Conditions of employment
- Must provide proof of U.S. citizenship.
- Appointment subject to background investigation and favorable adjudication.
- Males born aftermust be registered for Selective Service.
- Direct Deposit participation required.
- Successfully pass the E-Verify employment verification check. To learn more visit and random alcohol and drug testing are required. You will not be appointed to the position if a verified positive test is received.
- Must have and maintain a valid drivers license throughout employment.
- Must possess and maintain a valid Commercial Drivers License (CDL) with Class A endorsement.
- You are required to wear a uniform and comply with the uniform standards. A uniform allowance will be provided.
- A physical examination will be required or a statement regarding physical ability will need to be completed. You must maintain physical fitness standards throughout employment.
- your performance and conduct;
- the needs and interests of the agency;
- whether your continued employment would advance organizational goals of the agency or the Government; and
- whether your continued employment would advance the efficiency of the Federal service.
Qualifications
Although no specific amount of experience education or training is required applicants must meet a minimum level of ability in relation to the position and the Assessment Questionnaire in order to be rated qualified for consideration. To be qualified candidates must meet any screen out element(s) listed at an acceptable level and must achieve an average rating of at least acceptable on all of the elements. Only education training or experience acquired before the closing date of this announcement will be considered.
SCREEN-OUT ELEMENT: Your qualifications will first be evaluated against the prescribed screen out element which usually appears as question 1 in the on-line questionnaire. Those applicants who appear to possess at least the minimal acceptable qualification requirement are considered for further rating; those who do not are rated ineligible and are eliminated. The potential eligibles are then rated against the remainder of the Job screen out element for this position is: Ability to do the work of a Engineering Equipment Operator without more than normal qualifications will be evaluated on the following job elements:1. Operation of Motor Vehicles.
2. Ability To Interpret Instructions Specifications etc.
3. Work Practices (Knowledge of Equipment Assembly Installation Repair etc.).
4. Ability To Use and Maintain Tools and Equipment.
5. Ability to Drive Safely.
Education
There is no substitution of education for experience for Federal Wage System (FWS) positions.
Additional information
This position will be filled under the Field Unit Local Hiring Authority. Eligibility is limited to applicants who reside within the defined local commuting area at the time of application. For this announcement the local commuting area is the area from which individuals can reasonably commute to the duty station under normal conditions. The defined vicinity for this position is: approximately 50 miles or 60 minutes from Corvallis Oregon for the R1-Willamette Valley National Wildlife Refuge Complex duty station. You must provide proof of residency within the defined vicinity (e.g. mortgage or property deed lease/rental agreement utility bill insurance policy etc.). See the Required Documents section for information on how to verify current residence.
This announcement may be used to fill additional positions if identical vacancies.
All Department of Interior (DOI) employees their spouses and minor children may not acquire or retain any claim permit lease small tract entry or other rights granted by the Department in Federal lands with limited exceptions. Additional ethics prohibitions can be found here surplus and current or former displaced Federal individuals who have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) must be well qualified for the position to receive consideration for special priority selection. Well qualified means that the applicant meets the following: OPM qualification standards for the position; all selective placement factors where applicable; special qualifying conditions that OPM has approved for the position where applicable; is physically qualified with reasonable accommodation where appropriate to satisfactorily perform the duties of the position upon entry; and is rated by the organization at least at the well qualified level.
Applicants who include vulgar offensive or inappropriate language or information in their application package will be ineligible for further consideration for this position.Candidates should be committed to improving the efficiency of the Federal government passionate about the ideals of our American republic and committed to upholding the rule of law and the United States Constitution.
Required Experience:
IC
$102.9k - $207.1k
...environments, mission-critical outcomes, operational advancement, scientific discovery and... ...the industry’s best and most innovative engineering employers, then Jacobs is where you... ...specifications• Evaluation and selection of process equipment, pumping systems, pipe materials, and...SuggestedFull timeRemote work- ...rewarding career working with the industry’s best and most innovative engineering employers, then Jacobs is where you belong. We are looking for... ...interest in treatment and/or mechanical system design and operation • Self-motivation, team-oriented work practices, strong data...Suggested
- ...We're seeking intermediate design engineers with a broad background in environmental site remediation for federal and global private... ...design data. Safety will be your priority, as you contribute to operational excellence and maintain the highest standards of Health & Safety...SuggestedFor contractorsFor subcontractorWork at officeRemote work
- ...Contribute to problem solving activities pertaining to tool operation and repeatability. Assure run logs and data entry are always... ...feedback on improvements to work activities. Learn to "know" the equipment you operate. Understand and apply the scientific method....SuggestedLocal areaShift work
- ...customer service Complete pre and post trip inspections on equipment Maintain driver's daily log and legal load limits Complete... ...a clean truck appearance by complying with Knife River's operational policies, procedures and standards Climbing in and out of truck...SuggestedFull timeApprenticeshipLocal areaImmediate startFlexible hoursNight shift
$82k - $135k
...STAFF MECHANICAL ENGINEER At Andrews Cooper, we specialize in delivering cutting-edge engineering solutions in the HardTech space... ...PREFERRED QUALIFICATIONS: Experience designing complex automation equipment, robotic systems, test equipment, fixtures, EOAT, or precision...Full timeWork at officeFlexible hours- ...matter expert within our Data Center team, you'll lead mechanical engineering efforts across a portfolio of data center projects, including... ...for cooling load analysis, hydronic system design, and equipment selection; direct material take-offs and estimating inputs; and...Contract workFor contractorsRemote work
$50.48 per hour
...AGW) is seeking a Facilities Mechanical Engineer for an Onsite position with a Global... ...Design and layout for wet and dry piping, equipment layout, HVAC, exhaust, fire suppression... ...solutions company. AGW delivers operational, clinical, lab and professional talent...Contract workFor contractorsLong distanceMonday to Friday$92k - $146.9k
...center of that transformation.As an Advanced Process Capability Engineer, you won’t just analyze problems—you will eliminate them at... ...reduction initiatives that directly improve profitability and operational performanceDrive Right First Time (RFT) and zero-defect strategies...Hourly payTemporary workFlexible hours$75 - $85 per hour
...recruiting a Contractor Senior Mechanical Engineer within its Nuclear Steam Supply System (... ...of pressure vessels and/or primary equipment supports in accordance with ASME BPVC Section... ...sit and stand; walk; bend; use hands to operate office equipment; and reach with hands...Hourly payPermanent employmentFull timeContract workFor contractorsWork experience placementWork at officeRemote work- ...development. General Purpose: Responsible for process engineering with a strong focus on process safety, leading the creation of... ...definition, etc.). Provide technical support for construction or operating sites, as needed. Monitor and report as required on the...Work at office
$30 - $39 per hour
...to our PWP Digital Web Presses. You will operate and maintain multiple PWP Web presses. The... ...are very large industrial pieces of equipment that require hands on electrical mechanical support. Working alongside R&D engineers will require you to trouble shoot, diagnose...Daily paidFull timeContract workTemporary workPart timeRelocation package- ...experience involving bearings, hydraulics, pumps, gearboxes, rotating equipment, equipment installation, and mechanical troubleshooting.... .... Preferred: Manual machining experience , including operation of conventional lathes, mills, drill presses, and related shop...Night shiftRotating shiftDay shift
- ...Nuclear Component Analysis Mechanical Engineer (ASME Section III / ANSYS) Remote work... ...vessel internals, and/or primary equipment supports in accordance with ASME BPVC Section... ...requiring creativity and innovation. Operates independently while seeking input...Full timeWork at officeRemote workShift work
$40 - $50 per hour
...ON-Board Services is hiring a Mechanical Engineer in Corvallis, OR! For immediate... ...design and layout for wet and dry piping, equipment layout, HVAC, exhaust, fire suppression,... ...The ON-Board Family of Companies conducts operations through its Corporate Headquarters located...Full timeContract workTemporary workFor contractorsImmediate startVisa sponsorshipRelocation packageLong distanceMonday to FridayFlexible hours$127.1k - $153.4k
...BUSINESS NEEDS. POSITION SUMMARY: The NSSS Mechanical Systems Engineering organization is focused on the NuScale Power Module System... ...is required; to sit and stand; walk; bend, use hands to operate office equipment; and reach with hands and arms. Ability to travel...Full timeWork experience placementWork at officeRemote work$116.15k - $182.4k
...Mechanical Design Engineer Description - The PageWide Industrial Division of HP designs and delivers complex, high-volume digital... ...you will engage closely with Customers, other R&D teams, Operations, Manufacturing, Procurement and Supplier engineering teams to...Full timeTemporary workWork experience placementLocal areaRelocationFlexible hoursShift work$26.15 - $28.93 per hour
...Technician , you are responsible for running and monitoring specific equipment on the production line in a safe and reliable manner. Your... .../ Production Mechanic is expected to follow standard operating procedures, respond to basic equipment stops, and escalates abnormalities...Contract workSecond jobLocal areaWorldwideShift workNight shiftDay shift$21.8 per hour
...Must be 18 years or older Able to lift up to 50 pounds Must be willing and able to be certified to safely operate a forklift or other mobile equipment in a fast-paced environment. Must be able to work in a variety of environments including but not limited to:...Hourly payLocal areaShift workNight shiftDay shift- ...to learn new skills with attention to detail. Lift and/or pull 50lbs. Climb ladders, work off of ladders, man lifts or other equipment. Willingness to work in various locations and conditions, including outdoors and in confined spaces. Ability to maintain a...Work at officeImmediate start
- ...Mass Timber Production Operator Job Description Summary Operate machinery and equipment used in the manufacturing process of mass timber products. Monitor production processes to ensure products meet quality standards and specifications. Perform routine maintenance...
$92k - $119.4k
...performers as proven as our products. Join us. ATI Albany Operations is seeking a Senior Controls Engineer to join our team. This is an excellent opportunity... ...for the design, development, and implementation of equipment control systems that improve plant efficiency and...Hourly payTemporary workFor contractorsFlexible hours- ...plastics. Run air lines from the pneumatics panel to the air operated valves, pumps, and tanks. Perform fusion welds on... ...leveling the tool prior to system testing. Assist in facility equipment upgrades and facility equipment preventive maintenance/repairs...
$29.98 - $44.97 per hour
...PAPE’ MACHINERY, INC. – CONSTRUCTION & FORESTRY DIVISION – TANGENT, OR HEAVY EQUIPMENT SHOP TECHNICIAN: Do you love working on equipment and turning wrenches? Are you looking to grow your skills as a mechanic? Are you looking for not just another job, but a career...Temporary workFlexible hours- ...Description Job Title: Wafer Fab Process Engineer Employee Type: MSP Expected... ...with a team of engineers, technicians, and operators to develop reliable, cost-effective and... ...process steps including needed inspection equipment Collaborate and communicate with...Work at officeWork visa
$108.91k - $131.44k
...minimum of a M.S. degree in Mechanical Engineering, Applied Physics, Systems Engineering,... ...and heat distribution system design or operation in the petrochemical and chemical industries... ...; bend, use hands to operate office equipment; and reach with hands and arms. Ability...Full timeWork experience placementFor subcontractorWork at officeRemote work- ...Trainee to learn X-ray inspection of complex titanium castings for aerospace and defense. In this hands-on role, you’ll operate industrial radiography equipment under close supervision, follow strict safety and radiation protection procedures, and assist in capturing and...Traineeship
- Selmet is seeking a Wax Cleaner to support titanium casting production in our Springfield, OR aerospace manufacturing facility. In this role, you will clean, inspect, and prepare wax patterns and assemblies used to produce precision castings. Responsibilities include removing...
- ...technicians while ensuring all HVAC systems operate at peak performance and comply with... ...to minimize disruptions while maximizing equipment longevity. We embrace more innovative ways... ...s degree in HVAC Technology, Mechanical Engineering, or related field Oregon electrical...Daily paidFor contractorsFlexible hoursAfternoon shift
- ...Job Description Job Description Job Title: Mechanical System Design Engineer Location: Corvallis, OR Type: Direct Hire Responsibilities Perform mechanical engineering assignments related to the design, inspection, and testing of nuclear steam supply system...Local area
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Engineering Equipment Operator. Be the first to apply!



