Repair and Tool Technician
The Home Depot
Job Description
Position Purpose:
Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.
We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
- Job DescriptionPosition Purpose:Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that unitsSuggested
- ...Repair and Tool Technician | Home Depot Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained...Suggested
- ...Job Description Job Description JOB TITLE: Small Tool Technician PRIMARY FUNCTION: The Small Tool Technician position supports the branch, and client, in all diagnosis, maintenance and repair of gas engine, electrical, and air powered equipment needs. This position...Suggested
- ...Piping Isolation & Testing Products, Flow Measurement Products, Heat Exchanger Tools, and Tube Plugs. Our products are critical to safe and effective construction, maintenance, and repair of piping systems and heat transfer equipment found in refineries, petrochemical...SuggestedWork experience placementWeekend work
- ...Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools...SuggestedTemporary workFlexible hours
$30.29 - $43.18 per hour
...will also support our professional service team by machining and repairing existing valves and valve components. In this role, your... ..., and CNC mills. Must understand material hardness, cutting tools, speeds and feeds, coolant requirements and machining techniques...Flexible hours$25 per hour
...Pearland, TX 77581 Pay Rate: $25.00/hr Shift: First shift (6:00-4:30) Description: CNC Lathe Machinist Need to be able to set up, read programs and run parts. Fanuc and/or Okuma experience. Live tooling experience. expecting a lot of overtime soon.Shift workDay shift$30 - $38 per hour
...Job Description This role is based in a rotating equipment repair shop that refurbishes pumps, compressors, and turbines. You will... ...Verify dimensions and tolerances using appropriate measuring tools to ensure quality standards are met. Maintain a clean, organized...Weekly payContract workTemporary workMonday to FridayNight shiftDay shift$22 - $27 per hour
Job Position: CNC Machinist II Location: Pearland, TX 77581 Pay Rate: $22-27hr Shift: Description: Pay range is $22-27/hr DOE need 2+ years experience, have experience doing job set-ups and edits Must be able to do simple math Ability to interpret technical...Shift work$33 - $35 per hour
...internals. Fit carbon steel ranging from 1/4" to 2" thick. Pass fit-up inspections with minimal oversight. Utilize industrial hand tools for material layout and fit-up. . Essential Skills Minimum of 5 years fabrication experience. At least 3 years of vessel...Weekly payContract workTemporary workMonday to FridayDay shift- Discount Tire is hiring a Part-Time Tire Technician to support tire installation, rotation, balancing, and repair while delivering an inviting customer experience. This role is foundational to the store’s success and offers a clear promotion path through hands-on training...Weekly payPart time
- Aerotek is seeking an experienced Vessel Fitter for a large steel fabrication environment in Pearland, TX. You will layout and fit up fabricated parts to vessel shells, burn shells, fit nozzles and internals, and ensure all fit-up inspections pass with minimal oversight...Day shift
$30.29 - $43.18 per hour
...a variety of machining techniques and equipment. You will also repair parts from the field, returning them to OEM specifications. You... ...HBMs, and CNC mills. Must understand material hardness, cutting tools, speeds and feeds, coolant requirements and machining techniques...Hourly payMonday to FridayFlexible hoursShift workAfternoon shift- ...revision control, needed router updates, and job progression. Quoting Support — Assist with job quoting by analyzing machining time, tooling needs, and process steps. Quality Coordination — Work with quality, production, and management teams to ensure quality expectations...Flexible hoursWeekend workAfternoon shiftEarly shift
$800 per month
...Description Start Strong with NTB & Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. NTB is proud to join the... ..., Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible...Hourly payWeekly payFull timeImmediate start- ...Requires interpreting geometric dimensions and tolerances (GD&T). Edits programs at the mills and lathes by entering instructions, setting tool registers, offsets, compensation, and conditional switches; Formulates machining requirements using basic math calculations,...Work at officeLocal area
- ...industrial buildings Does not complete work or services outside of defined scope without permission of manager Operates hand tools, power tools, gauges and measuring equipment to complete project. Supervises/ trains apprentice/helper Other duties as assigned...ApprenticeshipWork experience placementWork at officeLocal areaImmediate start
- ...Job Description SPRINKLER SERVICE TECHNICIAN JOB DESCRIPTION Job Responsibilities... ...and/or participate in the trenching and repair of underground mains including backfilling... ...Maintenance and care of equipment – trucks, lifts, tools, etc. Keep jobsites clean and...For contractorsApprenticeshipWork experience placementWork at officeLocal area
$22 - $30 per hour
...am-3:30pm with possible OT. Description: Pay DOE $22.00 - $30.00 hr. Lathe operators Knowledge with threads and inspection tools using gage maker Able to program using canned cycles Set-ups including boring jaws and first Article inspection Fanuc Control...Shift work- ...interpreting geometric dimensions and tolerances (GD&T). * Edits programs at the mills and lathes by entering instructions, setting tool registers, offsets, compensation, and conditional switches; * Formulates machining requirements using basic math calculations,...Work at officeLocal area
- Benefits: 401(k) 401(k) matching Company parties Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Profit sharing Training & development Vision insurance Bonus based on performance Parental...
$800 per month
...Start Strong with Mavis: Eligible Automotive Tire Technicians receive weekly bonuses up to $800. Mavis Tires & Brakes at Discount Prices... ..., Mavis is one of the largest tire sales and automotive repair chains in the United States. Mavis offers eligible Automotive...Hourly payWeekly payImmediate start- ...vertical mills for short-run and production work Load, verify, and manage CNC programs at the machine control Set work offsets, tool offsets, and establish accurate workpiece zeroes Interpret blueprints, drawings, and work instructions Perform machine setups...
- ...machinists to resolve setup issues, optimize toolpaths, and refine production processes. Maintain organized programming archives, tool lists, and setup documentation for repetitive and custom oilfield parts. Required Qualifications Machining Experience:...Full timeWork at office
- ...CNC mills and lathes to manufacture precision components. Interpret engineering drawings, blueprints, and GD&T requirements. Select tooling, adjust offsets, and optimize feeds and speeds to maximize efficiency and part quality. Inspect finished components using precision...
- Location: Pasadena, TX Job Type: Full-Time | Hourly Position Summary Looking to start a hands-on career in manufacturing? Haygor Instrument & Company is seeking motivated individuals to join our team as Entry-Level CNC Machine Operators. No prior CNC experience is required...Hourly payFull time
- Haygor Instrument & Company in Pasadena, TX is seeking entry-level CNC Machine Operators to start a hands-on career in manufacturing. No prior CNC experience is required as we provide paid, on-the-job training to learn how to operate CNC machines that produce precision ...
- John Crane, a business of Smiths Group, seeks an experienced CNC Operator/Programmer for evenings and weekend shifts. The hybrid role combines hands-on machining with on-floor programming to improve cycle times and machine utilization. Experience with Mazak lathes/mills...Shift workWeekend workAfternoon shift
- John Crane, a business of Smiths Group, is seeking a CNC Machinist in the United States. Weekend day and night shifts are available; day shift values Mazak lathe experience and Haas/DMG lathe familiarity. The role sets up, programs, edits and runs CNC machines including...Flexible hoursNight shiftWeekend workDay shift
- ...CNC set up operators. Works from factory work orders, prints and written or verbal instructions. Notifies supervisor of shop and tooling requirements. Operates CNC machines as assigned and may be required to operate more than one machine simultaneously. High School...Permanent employmentFull timeWork experience placementWork at officeWorldwideFlexible hoursShift workNight shiftWeekend workDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!
- maintenance technician ii Pearland, TX
- pool repair technician Pearland, TX
- repair technician Pearland, TX
- maintenance technician Pearland, TX
- hotel maintenance technician Pearland, TX
- skilled maintenance technician Pearland, TX
- hospital maintenance technician Pearland, TX
- maintenance mechanic Pearland, TX
- data center maintenance technician Pearland, TX
- hospital maintenance mechanic Pearland, TX


