MIG Welder
$20 - $28 per hourSea Box, Inc.
Job Purpose:
Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times.
Job Summary:
This position reports to the Plant Manager or a Department Supervisor. The ideal candidate should possess knowledge of machines and tools including their design, uses, repair, and maintenance.
Requirements:Responsibilities:
- Accident prevention – actively identify, correct and/or report safety hazards to prevent accidents.
- Actively identify and pursue cost reduction and efficiency/profit improvement opportunities.
- Support the ISO 9001 Quality Management System and the Sea Box Quality Policy calling for self-inspection of your work product.
- Read blue prints.
- Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers.
- Drill and punch holes in metal, for screws, bolts, and rivets.
- Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items.
- Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills.
- Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools.
- Operate safety equipment and use safe work habits.
- Weld components in flat, vertical, or overhead positions.
- Accomplish MIG Welding, which is 95% of the type of welding produced.
- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
- Use basic hand tools and a grinder to prepare surfaces for welding.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Operate manual or semi-automatic welding equipment to fuse metal segments,
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Performs other duties as assigned.
- Lift production objects of up to 50lbs.
- Perform other duties as assigned.
- Must be able to fulfill essential job function in a consistent state of alertness and safe manner.
Why work for Sea Box?
We offer benefits to our full-time employees that include:
- Health Insurance
- Dental Insurance
- Vision Insurance
- Basic and Voluntary Life
- Long-Term Disability
- Flexible Spending Accounts
- Employee Assistance Program
- Paid Time Off
- Paid Holidays, Bereavement, Jury Duty
- 401(k) with company match
- Employee Referral Program
Employees are eligible for most benefits on the 1st of the month following date of hire.
Hourly range: $20.00/hour - $28.00/hour
Education: High school diploma or equivalent.
Experience:
- The candidate should possess at least 1 – 2 years of welding experience.
- Must be able to read blueprints.
- Must pass AWS 4G welding test.
- Knowledge of oxy/acetylene and plasma cutter use a plus.
- Must be able to read a tape measure and basic print reading.
- Must have MIG welding experience. TIG welding is a bonus (limited TIG work)
Please note: We do not perform flux-core, plasma arc, shielded metal arc (stick), resistance (spot), or submerged arc welding.
Location: This position is onsite (non-remote) at the Company’s corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company’s normal hours of operation.
WE ARE AN EQUAL OPPORTUNITY EMPLOYER COMMITTED TO HIRING A DIVERSE WORKFORCE.
Notice Regarding the Use of Artificial Intelligence in Application Review:Notice of AI Use in Job Application Review
As part of our commitment in creating a fair, efficient, and consistent hiring process we may use artificial intelligence (AI) to help our recruiting teams organize, summarize, and analyze information provided by candidates, including resumes, application responses, and other materials submitted during the application process.AI may be used to identify patterns, highlight relevant skills, and experience, and assist in comparing a candidate’s qualifications with the requirement of a specific role. These tools are to improve efficiency and consistency while supporting more informed hiring decisions, which will ultimately be made by the hiring team.
Compensation details: 20-28 Hourly Wage
PIe189d9d697cf-38059-42086384
- ...Job Description Job Description Thompson First Group is currently seeking a qualified MIG Welder for a local client in Cinnaminson, NJ. Candidates who have a background completing MIG welds in an industrial setting are encouraged to apply. Job Description...SuggestedLocal area
- ...careers. Come join our journey, and experience what it means to be Done Right with Rhoads . We are currently looking for a Pipe Welder Shop to join our dynamic, fast-paced, and growing team. The Welder is responsible for the prep, layout, tack, weld, test, complex...SuggestedShift work
- ...Job Description Job Description Overview: Overnight TIG Welder: We are seeking a skilled and dedicated TIG Welder to join our fabrication... ...welding techniques including FCAW (Flux-Cored Arc Welding), MIG (Metal Inert Gas), shielded metal arc welding (SMAW), stick...SuggestedNight shift
$30 per hour
Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 30...SuggestedShift workWeekend workDay shiftAfternoon shift- ...Job Description Job Description WELDER-TIG FAB & CLADDING COMPANY PROFILE: Fluidyne Corp is a well respected prime contractor that manufactures custom valves for the Navy. The majority of our business supports the Navy’s critical Nuclear Propulsion and Level...SuggestedFor contractorsWeekend workAfternoon shift
- ...Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...welding-related tools, including basic troubleshooting and maintaining welding equipment to ensure a safe and efficient operation Welder must proficiently demonstrate welding ability through performance testing as determined by vessel project and classification...Full timeWork experience placementFlexible hours
- Founded and family‐owned since 1896, Rhoads Industries is a total solution provider of industrial fabrication, mechanical/maintenance and maritime services. In addition to our field service and project skilled labor, Rhoads has expansive shipyard facilities and over 30...Shift work
- ...components or to fill holes, indentations, or seams of fabricated metal products. Qualifications Demonstrated experience as a professional welder. Ability to strictly adhere to all safety standards. Demonstrated ability to accept and follow instructions from others....Work at office
$26 per hour
...Pipe WeldersLabor One is currently hiring pipe welders in San Diego, CA at a shipyard. Pay rate is up to $26 + $160 per diem, if eligible. Job requirements include three years of experience in welding, knowledge of welding procedures, and various types of welding equipment...Daily paidCurrently hiringShift work$20 - $30 per hour
Alber Service Company of Pennsauken, NJ is hiring a part-time sheet metal duct fabricator to make custom duct fittings . This position offers a highly-competitive, hourly wage of $20 - $30 per hour! No Stress Environment - You set your own hours. Night Owl? ...Hourly payExtra incomePart timeFor contractorsNight shift- At Spectrum Control, most departments operate on a 4-day, 10-hour work schedule in exchange for a 3-day weekend . We offer competitive wages and PTO, plus our benefits begin on day 1 of employment. Come join a workforce where we put you first! ESSENTIAL JOB FUNCTIONS...For contractorsWeekend work
- Aerotek - - Responsibilities: Assemble mechanical and electrical components; Read diagrams, schematics, blueprints; Inspect assemblies for quality; Maintain a safe, organized workstation; Follow production procedures
$17 - $20 per hour
Mechanical Assembler - 1st Shift Position: Mechanical Assembler Location: Moorestown, NJ Shift: 1st Shift | Monday-Friday | 7:00 AM - 3:30 PM Job Summary Assemble and configure components used in automated equipment. Work in various sub-assembly...Weekly payPermanent employmentFull timeContract workTemporary workImmediate startMonday to FridayShift workDay shift$18 - $21 per hour
Job Description Job Description Bergey’s Inc. is a family-owned business that has been servicing our customers’ needs since 1924. Currently our company has over 50 locations and more than 1,800 team members. Today our family of automobile, truck and tire companies...Full timeRelocation packageShift work- ...Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
- ...Labor One is hiring Pipe Welders for a shipyard in Port St. Joe, FL Shipyard Experience is required. Housing assistance is available. Please contact our team for more information! Cell: (***) ***-**** / (***) ***-**** *Please send us a text if we don't answer...Work at officeLocal areaFlexible hours
- SummaryYou will serve as a SHEET METAL MECHANIC LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Norfolk Naval Shipyard and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.This position is located in Shop 17.Applicants will only be considered...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shiftRotating shift
- Job Description Job Description Thompson First Group is seeking Assemblers for contract to hire positions with a local client in Cinnaminson, NJ. Candidates that have a background working with with power tools, grinders, impact guns, and circle saws are encouraged...Contract workLocal area
$17 - $20 per hour
Mechanical AssemblerOPEX Corporation is seeking a full-time Mechanical Assembler to join our manufacturing team at our World Headquarters in Moorestown, NJ. This position is responsible for assembling and building industry-leading mail automation equipment using assembly...Hourly payFull timeMonday to Friday$30 - $32 per hour
...Job Description Job Description WELDER- WEEKLY PAY- START ASAP Location: Baltimore, MD Pay: $30-$32/hour + $50 daily per diem + daily lodging Hours: Monday-Saturday This role supports maintenance and repair activities at a coal-fired utility plant in Baltimore...Weekly payDaily paidContract workTemporary workImmediate startShift work- DC Fabricators (DCF) is seeking a talented Fitter/Fabricator (2nd Shift) to join our team. This is an on-site position reporting to our manufacturing facility in Florence, NJ. The hours for this position are 3:30 PM – 12:00 AM. At DCF, you’ll be part of a skilled team ...Work at officeFlexible hoursAfternoon shift
- Job Description Job Description Electro-Mechanical assembler or Technician Assembles, wires, programs, tests and packages electronic assemblies and sub-assemblies Able to read Customer Assembly Drawings and follow Work Instructions Skilled in use of hand tools...Work at office
$40 per hour
...Welders WantedTradesmen International is immediately hiring experienced Welders for projects located in the Philadelphia, PA area. This is a first shift opportunity, and the pay rate is up to $40/hour based on experience and skill level. If you are a Welder and want to...Work at officeImmediate startDay shift$21 - $25 per hour
...Welder Location: 377 Crooked Lane, King of Prussia, PA, 19406, United States Employee Type: FT Non-Exempt Required Degree... ...and welding of steel, aluminum and stainless-steel parts using a MIG process. Also required to perform other miscellaneous tasks, as...Hourly payFlexible hours- ...Welder Position at Hanwha Philly ShipyardEssential Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill and/or ability required. Ensure...Full timeWork experience placementFlexible hours
$50k - $100k
...Assembler III / Certified WelderAssembler III / Certified Welder is responsible for fabricating component parts or assembling the finished product according to the customer's specifications. Secures and maintains correct component parts and supplies required for the operation...Hourly payShift work- ...Overview DC Fabricators (DCF) is seeking a talented Welder to join our team. This is an on-site position reporting to our manufacturing facility in Florence, NJ. Shifts may vary depending on company needs. At DCF, you’ll be part of a skilled team that delivers high-quality...Work at officeFlexible hoursShift work
- Job TitleJob DescriptionHelpYou will be identifying and associating metals, alloys and filler metal by color code and standard markings.You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests.You will be using test methods ...
- ...Welding PositionYou will serve as a welder in the Department of the Navy to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to MIG Welder. Be the first to apply!


