Maintenance
$27 per hourAdecco
Adecco is assisting a manufacturing client in Greenfield, MA with hiring a Maintenance Technician I. This role is responsible for repairing and maintaining production machinery and equipment, including engines, motors, pneumatic tools, conveyor systems, and other production equipment. This is a hands-on role supporting daily production needs in a fast-paced manufacturing environment and requires flexibility to rotate between day and night shifts.
Position
Maintenance Technician I
Shift
• 12-hour rotating shifts
• Day Shift: 7:00 AM – 7:00 PM
• Night Shift: 7:00 PM – 7:00 AM
Pay
• Day Shift: $25.00 per hour
• Night Shift: $27.00 per hour
Duties and Responsibilities
• Repair and maintain production machinery and equipment including motors, pneumatic tools, conveyor systems, and production equipment
• Perform preventative maintenance duties as prescribed by the CMMS, including greasing equipment, changing oil, cleaning filters, and general maintenance tasks
• Use and understand the CMMS to accurately catalog work completed and maintain inventory accuracy
• Communicate with shift leaders and production employees to understand daily maintenance needs
• Interpret production setups to accurately perform tooling
• Complete all maintenance checklists fully and accurately
• Clean, organize, and maintain parts inventory within the CMMS
• Assist shift personnel with tooling functions
• Repair or replace defective parts
• Make required entries into PDE
Qualifications
• High school diploma or GED, or equivalent work experience
• Valid driver's license in good standing with reliable transportation
• Ability to adapt and change work direction on short notice to accommodate business needs
• Knowledge of basic shop tools including grinders, mag drill, hammer drill, and micrometers
• Ability to read and interpret safety rules, operating instructions, maintenance instructions, and procedure manuals
• Ability to write routine reports and correspondence
• Ability to communicate effectively verbally and through email
• Strong basic math skills including fractions, decimals, ratios, percentages, and graph interpretation
• Ability to apply common-sense reasoning to carry out written, oral, or diagram-based instructions
• Ability to troubleshoot problems involving multiple variables in standardized situations
• Ability to operate drills, grinders, and other maintenance shop tools
• Welding experience preferred or willingness to learn
• Willingness and ability to travel between plants or obtain parts as needed
• Flexibility to rotate between day and night shifts
Physical Requirements
• Ability to lift and/or move up to 50 pounds
• Ability to push or pull objects up to 250 pounds
• Ability to work 12-hour rotating shifts
• Ability to perform repetitive tasks
• Ability to routinely stand, sit, walk, hear, and speak throughout the shift
• Ability to reach, climb, bend, kneel, crouch, twist, and work in awkward or tight spaces
• Good close vision, depth perception, and ability to focus
If you are interested in this position, please apply using the link provided and be sure to include an updated resume.
Pay Details: $25.00 to $27.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:- The California Fair Chance Act
- Los Angeles City Fair Chance Ordinance
- Los Angeles County Fair Chance Ordinance for Employers
- San Francisco Fair Chance Ordinance
Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
$27 per hour
...Maintenance Technician Lead Location: Greenfield, MA Pay: $27.00/hr Schedule: 12-hour rotating shifts Employment Type: Temp-to-Hire Adecco Staffing is seeking a Maintenance Technician Lead for a manufacturing facility in Greenfield, MA! This is an...SuggestedHourly payTemporary workLocal areaShift workRotating shift$27 per hour
...Adecco is assisting a manufacturing client in Greenfield, MA with hiring a Maintenance Technician I. This role is responsible for repairing and maintaining production machinery and equipment, including engines, motors, pneumatic tools, conveyor systems, and other production...SuggestedHourly payTemporary workWork experience placementLocal areaShift workNight shiftRotating shiftDay shift$23.5 per hour
Adecco Staffing is partnering with a manufacturing company in Greenfield, MA to hire Manufacturing Associates on a temp-to-hire basis. Position: Manufacturing Associate Pay: Day Shift: $21.50/hour Night Shift: $23.50/hour Schedule: Day Shift: 6:45 AM...SuggestedHourly payTemporary workLocal areaNight shiftWeekend workDay shift$30 - $36 per hour
Install, maintain, and repair industrial machinery and equipment to support safe and efficient facility operations. The Millwright is responsible for assembling, aligning, troubleshooting, and precision-setting mechanical equipment in accordance with project specifications...Suggested- ...future of dairy. From your PASSION to ours Lactalis US Yogurt, part of the Lactalis family of companies, is currently hiring a Maintenance Technician II based in Brattleboro VT. We are looking for an experienced Maintenance Technician. This is a 12hr shift with...SuggestedCurrently hiringShift workNight shiftRotating shift
- This company has over 160 years of experience as a processing and packaging machine manufacturer with a global presence in more than 30 countries, rest assured;no day will ever be identical. The client's customers are as diverse as their products, ra Field Service Technician...
- ...Bluechip Pros seeks a reliable janitorial worker to perform cleaning and maintenance across assigned facilities. You will dust, sanitize, mop, and sanitize bathrooms, restrooms and public areas while following established procedures and safety guidelines. Responsibilities...
- ...Analyzes, diagnoses, and trouble shoots problems, determines the root cause, and makes repairs. Performs scheduled preventative maintenance on equipment as assigned. Operates drill presses, lathes, milling machines, sheet metal breaks, shears, and other equipment used...Temporary workLocal areaMonday to FridayFlexible hoursShift workNight shiftAfternoon shift
$20 - $41 per hour
ARE YOU A FLAT RATE OR HOURLY EXPERIENCED TECHNICIAN WHO FEELS THE FLAT RATE SYSTEM IS NOT FAIR OR IS OUTDATED (LOW WARRANTY PAY, NOT REWARDED FOR EXPERIENCE OR LONGEVITY, LACK OF TRAINING,ETC.)? ARE YOU AN EXPERIENCED TECHNICIAN WITH ANY MANUFACTURER (SUBARU, TOYOTA...Hourly payPrice workLocal area- ...electricity, steam and hot water to the hospital complex for environmental and process needs. Security duties, as needed, including maintenance and cleaning of Brattleboro Retreat vehicles, snow removal and assist in testing fire alarm system. ESSENTIAL DUTIES AND...Daily paidWork at officeLocal areaFlexible hoursShift work
- ...Job Responsibilities Performs all phases of installation, maintenance, repair, and inspection of electrical and instrumentation systems and service work in new or remodeled facilities. Installs, repairs and maintains electrical motors, complex electronic devices, control...Apprenticeship
- ...Management: Communicate production delays, technical challenges, or timeline changes proactively to the shop manager. Equipment Maintenance: Keep all shop tools, machinery, and specialty repair equipment clean, organized, and properly maintained. Safety Compliance: Wear...Temporary workApprenticeshipInternshipLocal areaImmediate start
$27.5 per hour
Stericycle is now part of W M To learn more about WM's acquisition of Stericycle, CLICK HERE ( to read the press release I. Job Summary Under management direction, a Hospital Services Worker travels between customer healthcare facilities providing on-site ...Hourly payTemporary workPart timeWork experience placement- ...Prescription Safety Glasses Program ~ Shift Differentials for 2nd and 3rd Shifts ~ Bereavement Leave Job Objective The Maintenance Supervisor provides leadership and direction to the Maintenance team to ensure the safe, reliable, and efficient operation of...Permanent employmentTemporary workFor contractorsLocal areaImmediate startFlexible hoursShift workNight shiftAfternoon shift
- ...Director of Maintenance Windham Northeast Supervisory Union Bellows Falls Middle School - Bellows Falls, Vermont Central Elementary School - Bellows Falls, Vermont Saxtons River Elementary School - Saxtons River, Vermont Job Details Job ID: 5944707 Application Deadline...Full timeFor contractorsWork visa
$20 - $25 per hour
...that are broken and report all unsafe actions, problems or abnormal situations to the store manager or safety manager Perform daily maintenance of tools and equipment Review service work orders for complete information such as required customer information, repairs, mounts...Hourly payWork at officeFlexible hours$38 - $45 per hour
...Job Description Perform all phases of electrical installation, maintenance, repair, and inspection to support the safe and reliable operation of industrial and commercial facilities. Responsible for installing and troubleshooting electrical and instrumentation systems,...Apprenticeship- PLC Trenching Co., LLC is seeking a Heavy Equipment Mechanic to maintain and repair our fleet, ensuring peak performance on job sites. The role demands expertise in repairing trenchers and heavy machinery with responsibilities that include inspections, diagnostics, and ...
$16 - $17 per hour
Custodian Job Overview The Custodian is responsible for the cleanliness and sanitation of all areas assigned. Roles & Responsibilities To perform this job successfully and safely, an individual must be able to perform each essential duty satisfactorily. Other...Hourly payMonday to FridayShift work- ...Surface Maintenance Mechanic This is a National Guard Title 32 Excepted Service position. This National Guard position is for a Surface Maintenance Mechanic, Position Description Number D1194000 and is part of FMS 4 of the Vermont Army National Guard. This position...
- ...Surface Maintenance MechanicThis is a National Guard Title 32 Excepted Service position. This National Guard position is for a Surface Maintenance Mechanic, Position Description Number D1194000 and is part of FMS 4 of the Vermont Army National Guard. This position is located...
$18.96 - $26.73 per hour
...school. In addition to performing daily cleaning duties the custodian provides direct support to classroom teachers in set up and maintenance of classroom furniture and equipment. The school custodian also serves as a role model to students by displaying a professional,...Hourly payImmediate startShift workAfternoon shift$46.21k - $58.18k
...teardown, rebuild, and recommissioning of outage-support systems. Perform onsite setup, operation, and preventive/corrective maintenance for integrated systems. Travel 30–50% of the year to cover planned outages and time-sensitive field work. Generate purchase...- ...Maintenance TechnicianThe purpose of this position is to perform maintenance, repair, troubleshooting, inspections, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment. Troubleshoots, performs maintenance and major repairs...Remote work
$20 - $50 per hour
...Position Summary TheDiesel Technician maintains diesel equipment,completes inspections and preventive maintenance requirements,corrects vehicle deficiencies, completesadjustments and alignments,and maintainsrecords to ensure we are able to keep our level of commitment...ApprenticeshipFlexible hours- Advantage Truck Group (ATG) is seeking an experienced Body Shop Technician to perform high-quality collision repairs, refinishing prep, and structural corrections on Class A commercial vehicles. A minimum of two years in automotive or commercial collision repair is required...
- Our client is a global industry leading industrial solutions provided for cutting machines, equipment, and solutions beyond machines. The precision cutting technology rests on four main pillars:- Superior, industry-leading CNC cutting machines and eq Service Engineer, ...
$100k - $160k
...with European vehicles Strong specialization and experience with Porsche vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude...Hourly payRelocationRelocation package- ...Lead Mechanic and Equipment Operations Manager, the Heavy Equipment Mechanic will perform general mechanical work in repair and maintenance of diversified automotive and construction/asphalt equipment. Employee repairs and services vehicles and other motorized equipment...Hourly payFull timeTemporary workFor contractorsSeasonal workLocal areaShift work
- Job Description Job Description Benefits: Simple IRA Competitive salary Flexible schedule Paid time off Training & development Hello, I am looking for individual(s) to clean Commercial , Air B& B and/or residential properties. Transportation...Flexible hours
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Maintenance. Be the first to apply!



