Repair and Tool Technician
The Home Depot
Repair and Tool Technician | Home DepotPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that units are maintained. Technicians work in both our stores with Tool Rental Centers and in our repair centers. In a store, technicians will be expected to provide service to store customers in Tool Rental which includes writing customer contracts and invoices for equipment rental and tool repairs, checking to make sure tool is operating properly and demonstrating its proper use (as needed). In addition to supporting customer repair needs, they are also responsible for the day-to-day operation and maintenance of equipment in the tool rental department. In non-store locations, technicians will ensure units are repaired, tested for the quality of the repair and cleaned prior to returning to the store where the repair originated. Technicians must have a thorough knowledge of all tools and must effectively manage the tool inventory by maintaining the tools and repairing them as necessary.
- ...Repair and Tool Technician | Home DepotPosition Purpose: Repair and Tool Technicians are responsible for the evaluation and repair of small engines, outdoor power equipment and handheld electrical devices. This position makes equipment recommendations and ensures that...Suggested
- ...Hadrian's factories. What You'll Do Fabricate and modify tooling in direct support of new product introduction across our... ...and water jet. A track record of mentoring less experienced technicians on tooling fabrication. Compensation: For this role, the target...SuggestedPermanent employmentFull timeLocal areaRelocation packageFlexible hours
- ...Description Job Description We're looking for Automotive Wheel Repair Technicians with a minimum of 1 year of professional experience in wheel... ...vehicle purchase discount – all while using state of the art tools in one of our high-tech Inspection Centers ( click here to...Suggested
$30 - $38 per hour
...Leads and/or Assists in the design and development of machine tooling Proficient in set up and operation of Turrets, Laser, Panel... ...and solving problems Identify tool and die issues and perform repair (sharpening) and replacement of tool & die Observes operation...SuggestedHourly payFull timeLocal areaRemote workWorldwideFlexible hoursWeekend work- Ecology Auto Parts, Inc. seeks a Commercial Tire Repair Technician in Downey, CA to service semi-truck and trailer tires and wheels. You will assess tread and valve quality, determine life remaining, re-tread tires, and perform on-site repairs, road service calls, and after...Suggested
$25 per hour
...components. This position works with CNC software, machine controls, tooling, and inspection equipment to ensure parts are produced... ...routine machine maintenance and report equipment concerns or needed repairs. Maintain accurate production, inspection, and quality...Hourly payFor contractorsLocal areaWorldwide$44 - $63 per hour
...Senior Programmer who works on lathe machines to join our team to machine E-2 parts and tools. You will play a crucial role in the development, fabrication, maintenance, and repair of various tools, jigs, and fixtures used in our production processes. Your precision, attention...Permanent employmentFull timeTemporary workWeekend work$50 - $60 per hour
...components and assemblies. Must research best practices and tools for each job, regardless of materials or scope of project. Use... ...fully dimension drawings in Catia V5 for fixturing, shop aids, repair plans, etc. Create requests for information to send to customers...Full timeRemote work- ...Operates and maintains most types of machine shop equipment for the repair or manufacture of gas turbine engine parts. ESSENTIAL... ...Chief of Engineering. Operates manual or CNC machine tools as authorized. Programs CNC equipment if authorized. Carries...Permanent employmentWork at officeLocal areaWorldwide
$25 - $35 per hour
...jobs including custom plastic injection molding, injection mold tooling, investment casting patterns, and the newest additive... ...and inspections of products, services and software systems, and repair faulty programs and machinery. You should have an above-average...Full timeTemporary workMonday to FridayNight shiftAfternoon shift$35 - $45 per hour
...Perform in-process and final inspections using precision measuring tools (micrometers, calipers, indicators, bore gauges) Work with... ...~ Comfortable working on new part manufacturing as well as repair and restoration projects ~ Experience operating overhead cranes...Hourly payFull timeLocal areaAfternoon shift- ...procedures ~ Strong attention to detail ~ Ability to work well in a team environment \nCompany Description World class aerospace repair station with customers around the world. They are stable, in business over 30 years and rapidly growing. Company Description...
$32 per hour
...and inspections of products, services, and software systems, and repair faulty programs and machinery. You should have a mathematic... ...production and processing. You’ll be handling complex machines and tools. Key Performance Deliverables: Cultivate a strong rapport...For contractorsWorldwide- ....Assists higher classified workers as required.Performs rework, repair and other associated operations relating to the work described.Maintain... ...and interpret blueprints.Qualifications: Tacking Certificate.Tools used: Set up and operate metal expander, hand or pedestal...Permanent employmentTemporary workFor contractorsImmediate start
$23 - $27 per hour
...for tensile and fracture toughness, as well as fixture machining/repair Perform product inspection and rework as required Read and... ...specimen machining Proficiency with typical precision measurement tools such as dial indicators, bore gauges, micrometers, calipers, and...Permanent employmentTemporary workShift workWeekend workDay shiftAfternoon shift$49.92k
...scribed lines. Sets up single jobs in assembly jig for welding. Assists higher classified workers as required. Performs rework, repair and other associated operations relating to the work described. Maintain minimum output of 65%. Maintain minimum product...Permanent employmentTemporary workFor contractorsImmediate startWorldwideMonday to FridayAfternoon shift- ...empowers all students as future leaders. Job Summary A Heating and Air Conditioning Fitter inspects, installs, maintains, repairs, and replaces complete direct gas-fired, steam, hot-water, air conditioning, heating, and ventilating systems, including control instruments...
$25 - $35 per hour
...roll dies in operation to ensure proper functioning and replaces, repairs and resets them as necessary. • Examines samples from each... ...within prescribed tolerances, using variety of gauges and measuring tools. • Communicates with co-workers and supervisor to receive...Hourly payFull timeFor contractorsWork at office$25 - $50 per hour
...myriad clients in an organization that supports their service technicians! We provide a car allowance, a company cell phone, laptop,... ...Ideally someone with experience installing, maintaining and/or repairing, of CNC machining centers and CNC turning centers. With this experience...Local area$24 per hour
...portfolio, to Owners, Managers and Equity Investors of affordable housing, with compliance monitoring services via file audits and repair. Our clients recognize the value of our level of expertise and experience to meet their compliance needs. Entering 2017, Solari...Hourly payPart timeWork at officeLocal areaHome office$1,000 per month
...and experienced Biometric Fitter to join our team in Los Angeles. As a Biometric Fitter, you will be responsible for installing, repairing, and maintaining biometric passport systems. Your duties will also include conducting quality control checks and troubleshooting any...$53.56 per hour
...days. Job Duties/Responsibilities Inspects, installs, maintains, repairs, and replaces hot-water, high- and low-pressure steam, and... ...Special Physical Requirements: Manual dexterity and strength to use tools of the trade. Visual acuity to read and calibrate instruments....Hourly payFull timeApprenticeshipLocal area$25 per hour
...established setups. Review travelers, drawings, work instructions, tooling, and inspection requirements. Load, position, secure, and... ...nonconforming product rather than performing unauthorized repair or process changes. The existing HII description similarly requires...For contractorsWorldwide- Job Description Job Description We are looking to bring on a CNC Operator for an entry-level operating position. This position requires no prior machining experience, we will train you on the job. You will start with basic operations like loading bar feeders, running...
- Job Description Job Description Please note: This role is based in Bell Gardens, CA. Position Summary: We are looking for skilled machinists with extensive experience in CNC and/or conventional machining. The ideal candidate will have strong knowledge of machine...
- ...similar) preferred ~ Ability to read and interpret engineering blueprints and GD&T symbols ~ Strong knowledge of speeds, feeds, tooling, and fixturing for various materials ~ Detail-oriented with a commitment to tight tolerances and high-quality output ~ Ability...
- Job Description Job Description Journeyman machinist with programming and setup skills. Skilled CNC machinist with a fair knowledge of machining practices, being able to machine a product from print-to-part (cradle to grave). Knowledge of Fanuc, Mazak controllers...
$16.5 - $33 per hour
...check parts for quality, and work with the team to get the job done right. What You’ll Do Operate CNC mills and lathes Load tools, materials, and run basic programs Make offsets and basic edits with support Inspect parts with calipers, micrometers, and...Hourly payMonday to Friday$72.8k - $77k
...), to plan and execute machining operations. Set up CNC mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers, and by indicating vices and trimming heads for proper alignment...Hourly payWeekly payPermanent employmentDay shiftAfternoon shift- ...Standards: Use calipers, micrometers, and gauges to verify tolerances and perform final fit checks. Maintain Equipment: Monitor tooling, perform routine maintenance (coolant, oil, etc.), and ensure machines are operating efficiently. Improve Processes:...Full timeContract work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Repair and Tool Technician. Be the first to apply!
- hospital maintenance mechanic Los Angeles, CA
- roof repair technician Los Angeles, CA
- maintenance technician ii Los Angeles, CA
- device repair technician Los Angeles, CA
- automotive repair technician Los Angeles, CA
- part-time maintenance technician Los Angeles, CA
- laptop repair technician Los Angeles, CA
- maintainer Los Angeles, CA
- auto repair technician Los Angeles, CA
- conveyor maintenance technician Los Angeles, CA



