Quality Weld Inspector (5:00am to 1:30pm) 1st shift
$28.5 - $30.25 per hourG&W Electric Co
Job Description
We are looking to hire an enthusiastic and hardworking quality weld inspector with a good eye for detail and knowledge of weld materials, processes, technique, and overall weld integrity and quality.
The Quality Inspector – Weld & Fabrication ensures welded and fabricated products meet engineering drawings, welding requirements, customer specifications, and quality standards. This role works primarily on the manufacturing floor, inspecting parts at key stages of production to identify and contain quality issues early. The inspector works closely with Welders, Team Leaders, Supervisors, Welding Engineering, Manufacturing Engineering, and Quality Engineering to build quality into the process and prevent defects from moving downstream.
Essential Duties and Responsibilities
In-Process and Floor Inspection
- Perform pre-weld, in-process, and final inspections according to drawings, specifications, inspection plans, and procedures.
- Verify products meet requirements before they move to the next operation.
- Identify quality issues and process deviations early to reduce rework, scrap, and production delays.
- Provide immediate feedback to Welders, Team Leaders, and Supervisors when problems are found.
- Verify all required inspections and quality checkpoints are completed.
Pre-Weld and Fit-Up Inspection
- Verify materials, components, and configurations against drawings, BOMs, and specifications.
- Inspect joint prep, fit-up, alignment, gaps, dimensions, cleanliness, and overall readiness for welding.
- Verify weld locations, weld sizes, and welding symbols against engineering drawings.
- Confirm the correct Welding Procedure Specification (WPS) is available and being followed.
- Identify and contain nonconforming conditions before welding begins whenever possible.
Weld Inspection
- Perform visual inspections of welded assemblies for compliance with drawings, WPS requirements, workmanship standards, and applicable welding codes.
- Inspect weld size, length, location, profile, continuity, and overall workmanship.
- Identify weld defects such as cracks, porosity, undercut, overlap, incomplete welds, arc strikes, excessive reinforcement, and other unacceptable conditions.
- Inspect repaired or reworked welds before product release using appropriate weld gauges and measurement equipment.
- Support additional NDT activities when required and properly qualified.
Dimensional Inspection
- Inspect fabricated parts and welded assemblies against engineering drawings and specifications.
- Verify critical dimensions, tolerances, alignment, squareness, flatness, hole locations, and other required characteristics.
- Use calibrated inspection equipment such as calipers, micrometers, weld gauges, squares, tape measures, fixtures, and other measuring devices.
- Perform dimensional inspections throughout the manufacturing process to identify problems before fabrication is complete.
Final Inspection and Product Release
- Perform final visual and dimensional inspections of completed products.
- Verify all required manufacturing and inspection steps have been completed.
- Confirm all nonconformances and rework have been properly addressed.
- Complete inspection records and quality documentation accurately and on time.
Nonconformance and Containment
- Identify, document, tag, and segregate nonconforming material and products according to company procedures.
- Initiate or support NCR/NCMR documentation as required.
- Prevent nonconforming products from moving to the next operation without review and disposition.
- Verify rework and repairs are completed correctly.
- Support immediate containment when quality issues are identified.
Problem Solving and Continuous Improvement
- Support root-cause investigations and corrective actions related to welding and fabrication defects.
- Identify recurring quality problems and communicate trends to Production and Quality leadership.
- Work with Production, Welding Engineering, Manufacturing Engineering, and Quality Engineering to eliminate recurring defects.
- Participate in improvement efforts to reduce defects, rework, scrap, and downstream quality escapes.
- Help verify corrective actions and process improvements on the manufacturing floor.
Quality System and Documentation
- Maintain accurate inspection records and product traceability.
- Follow Quality Plans, Control Plans, inspection procedures, work instructions, and mfg. standards.
- Verify inspection equipment is calibrated and within its calibration period before use.
- Report damaged, inaccurate, or out-of-calibration equipment.
- Support internal and external quality audits as needed.
- Keep quality records organized and accurate.
Education and Experience: Minimum
- High school diploma or GED required; technical or manufacturing education preferred.
- Previous quality inspection experience in welding, metal fabrication, machining, or manufacturing.
- Ability to read and understand engineering drawings, tolerances, and welding symbols.
- Working knowledge of welding and fabrication processes.
- Ability to understand and follow Welding Procedure Specifications (WPS).
- Experience using dimensional and weld inspection equipment.
- Ability to accurately document inspection results and nonconformances.
- Strong attention to detail and ability to identify quality and workmanship issues.
- Strong communication skills with production employees, Team Leads, Supervisors, Engineers, & Quality.
Education and Experience: Preferred
- Experience inspecting MIG, TIG and other welding processes.
- Knowledge of applicable AWS and/or ASME welding requirements.
- AWS Certified Welding Inspector (CWI) certification or equivalent welding inspection training.
- Experience with Visual Testing (VT) and other NDT methods such as Penetrant Testing (PT), Magnetic Particle Testing (MT), or Ultrasonic Testing (UT).
- Experience with NCR/NCMR systems, root-cause analysis, corrective actions, and continuous improvement.
- Experience with Lean Manufacturing or World-Class Manufacturing practices.
Knowledge, Skills, Competencies
- Excellent verbal and written communication skills
- Analytical abilities with good attention to detail
- Proficiency in Microsoft Word and Excel
What we offer you:
Pay Range is typically between $28.50 - $30.25 per hour.
Please note the pay information shown above is a general guideline. Pay is based upon candidate skills, experience, and qualifications.
G&W Electric offers a comprehensive benefits package that includes:
- Medical, Dental and Vision Insurance
- Short and Long-Term Disability
- Life Insurance
- Health club membership program and reimbursement
- Employee Assistance Program
- Tuition Reimbursement
- 401 (k)
- Annual Profit Sharing
- Vacation
- Air-conditioned/heated state-of-the-art manufacturing facility
About G&W Electric
Innovating since 1905, G&W Electric has grown into a global leader in engineered electrical power grid solutions. Working with us means joining a worldwide team of passionate manufacturing professionals striving to continually improve the technologies the world depends on to deliver safe, reliable electricity. Our culture is focused on employee success, so we foster an entrepreneurial environment that encourages everyone to thrive.
Learn more about our company by watching this video:
G&W Electric enjoys a long reputation for product quality, innovation and world-class customer service to the power industry. We have established this reputation by believing that our greatest asset is our employees. We owe our success to the initiative and talents of highly skilled individuals within our team-based organization. Our goal is to set the standard for customer satisfaction by ensuring a superior level of service, performance and innovation. As a global organization and industry leader, we are committed to cultivating an engaging work environment that embraces our core values and develops our talent. Our continuous focus on growth and innovation means that you become part of a company that provides challenging opportunities, rewards excellence and combines your individual expertise to achieve a higher level of shared success. As part of our organization, you also help power the world!
G&W Electric is proud to be an Equal Opportunity Employer. All employees and applicants will receive consideration for employment without regard to age, color, disability, gender, national origin, race, religion, sexual orientation, gender identity, protected veteran status, or any other classification protected by federal, state, or local law. G&W Electric participates in the E-Verify process for all new hires.
*G&W Electric participates in the E-Verify process for all new hires.
VEVRAA Federal Contractor
- G&W Electric Co is seeking aQuality Weld Inspector (5:00am to 1:30pm) to ensure welded and fabricated products meet engineering drawings, welding requirements, customer specifications, and quality standards. The role focuses on in-process and floor inspections on the manufacturing...SuggestedEarly shift
- G&W Electric is seeking a Team Leader I to support day-to-day manufacturing operations in a 5:00am-1:30pm shift. You will mentor production staff, coordinate with supervisors, and drive improvements in standard work while ensuring on-time delivery to customers. Responsibilities...Day shiftShift work
- G&W Electric Co. is seeking a Quality Weld Inspector for the 1st shift (5:00am to 1:30pm) on the manufacturing floor. The role focuses on inspecting welded and fabricated parts to ensure conformance with drawings, WPS, and quality standards. You'll work with Welders, Team...Day shift
$27 - $31 per hour
..., align, square up, fit, stiffen and tack weld a variety of subassemblies and assemblies... ...Document actions by completing production and quality forms Train others on proper welding... ...Titles Frequencies - Occasional (1-33%); Frequent (34-66%); Continuous (67-1...Day shiftHourly payTemporary workFor contractorsWork experience placementLocal areaWorldwide$22.5 - $23.75 per hour
...Job Description Production Inspector In this job you will inspect component parts and... ...Document actions by completing production and quality forms We are looking for someone who:... ...and skill development Ideally has 1 - 3 years of experience working in a...SuggestedHourly payTemporary workFor contractorsWork experience placementLocal areaWorldwide$22.5 - $23.75 per hour
...operation to detect defects Determine material flow and coating quality by performing visual inspections Bake/cure parts at... ...written instructions in English. Ideally you will also have: 1-2 years’ experience working in a manufacturing environment 1...Day shiftHourly payTemporary workFor contractorsWork experience placementLocal areaWorldwide$16.5 per hour
...Job Description Job Description 2nd shift general labor We are hiring MOTIVATED and... ...paced environment with consistent hours on 1st and 2nd shifts. Responsibilities and... ...area Option of : ~1st shift (9:00am-5:30pm) 1st shit (6am-2:30pm) Pay Rate : ~...Day shiftWeekly payWork at officeShift workAfternoon shift$20 - $25 per hour
...Job Title: Quality Inspector Job Description This role is responsible... ...requirements. Spot welding and welding experience.... .... The position is 1st Shift, Monday to Friday, from 6am to 2:30pm. Job Type & Location... ...more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek...Day shiftWeekly payContract workTemporary workMonday to Friday$20 per hour
...Quality Visual Inspector (1st Shift) For those who want to keep growing, learning, and evolving. We at Kelly hear you, and we're here for you! We're... ...are some major details: Pay Rate: $20.00/hr Shift: 5:45 AM 6:15 PM Duration: 3-Month W2 Assignment What'...Day shiftShift work$19 - $21 per hour
...of identities with us. Job Summary The Quality Inspector will assist with quality control inspection... ...secure personalization facility working 1st shift Monday - Friday 6:00am - 2:00pm. Duties... ...diploma or GED required. At least 1 year of related experience in a manufacturing...Day shiftHourly payTemporary workWorldwideMonday to FridayFlexible hours- ...Quality Control InspectorMetal Fabricating company in Cicero, IL is seeking an experienced Quality Control Inspector. Candidate must have previous experience inspecting metal... ...and aluminum) fabricated parts.Shift: Monday-Friday, 5:00am-1:30pm.Duties:Reads blueprints,...Work at officeMonday to FridayShift work
$24 - $28 per hour
...Laser Machine Operator (9:00pm -5:30am) 3rd Shift Join to apply for the CNC... ...Operator (9:00pm -5:30am) 3rd Shift 1 day ago Be among the first 2... ...by completing production and quality forms Fabricator II In this... ...week ago Machine Operator - 1st shift ( Starting Pay $ 17.00...Day shiftHourly payFull timeTemporary workFor contractorsWork experience placementLocal areaWorldwideRelocation packageShift workNight shiftAfternoon shift- ...strong commitment to quality and safety. Responsibilities Perform spot welding on assigned parts and... ...standards throughout the shift. Operate welding... ...Shifts & Pay 2nd Shift: 3:30PM–2:00AM|$20.55/hrIncludes a $1 shift differential 3rd Shift: 6:30PM–5:00AM|$20.55/hrIncludes...Currently hiringShift workNight shiftAfternoon shift
- ...Openings) Elevate Your Welding Career A premier... ...to you. Available Shifts & Schedules: We are... ...production goals: ~1st shift : 6:00am-2:30pm (Mon-Fri) ~... ...Qualifications: Experience: 1+ years of... ...detail; must maintain high-quality welds within the standard...Day shiftWeekly payPermanent employmentFull timeTemporary workCurrently hiringLocal areaImmediate startShift workAfternoon shift
$16 - $18 per hour
...Job Description Job Description Position: Quality Assurance Inspector - Electronics Job Type : Long Term Pay: $16.00 - $18.00 depending on experience Hours: 1st shift: 7:00am - 3:30pm Location : South Elgin, IL Requirements: Resume, Interview...Day shift- ...-paced environment and experience with Ventana Ultra systems and frozen sections. The position supports dayshift hours from 5am to 1:30pm in the Anatomic Pathology department, with flexibility for varied start times including Saturday rotations. #J-18808-Ljbffr 01 Silver...Day shift
- ...Park, IL to prepare orders and floormats, with a 5-day week and weekends off. On-the-job training, 1st shift (5:00am-1:30pm), full-time, and a comprehensive benefits... ...internal promotion. The role emphasizes safety and quality in a large garment services company. #J-18808...Day shiftFull time
- ...Temporary Part Time Seasonal Hourly Position Temporary Part Time Seasonal Roles Available hours: 7:00 - 8:00AM and/or 9:30AM to 1:30PM and/or 2:30 to 5:30PM. 7:00-8:00 Morning Arrival Support (Outdoor Position) 9:30-1:30 Lunch/Recess Supervision 2:30-5:30 After School...Day shiftHourly payTemporary workPart timeSeasonal workShift work
$22 - $23 per hour
...looking for someone who takes pride in doing quality work, is comfortable using Microsoft Office and... ...part of a team. The schedule for this 1st Shift Material Handler position is Monday through Friday from 5:00am-1:30pm. The Material Handler is responsible for loading...Day shiftHourly payWork at officeRelocation packageMonday to FridayShift work$26 - $30 per hour
...Quality Inspector Kelly Engineering is seeking a Quality Inspector for a 6-month contract-to-hire... ..., trust the experts at hiring experts. 1st & 2nd Shift Available Pay: $26.00-30.00 per hour... ...is required. Any CMM operation (a plus) 5 years of experience in a dimensional quality...Day shiftHourly payContract workLive inShift workAfternoon shift- ...Quality InspectorA Manufacturing Company in Aurora, IL is seeking a Quality Inspector to join their team! Evaluation to hire opportunity.Work Hours: Monday to Friday 6:00am to 2:30pmPay Rate: $18.50 per hourQualification RequirementsMUST KNOW HOW TO USE MEASURING TOOLS...Day shiftWork at officeMonday to Friday
$23 - $28 per hour
...CNC Machine Operators (1st and 2nd Shift) to work at a company located... ...: 1st shift: 6:00am-4:30pm 2nd Shift: 4:30pm-3:00... ...of parts on 3-axis and 5-axis grinding, milling... ..., a high standard for quality and process compliance,... ...diploma or equivalent 1 year manufacturing...Day shiftHourly payLocal areaImmediate startShift workAfternoon shift$22 - $26 per hour
...Quality InspectorFocused on the electrical and network infrastructure markets, NSI continues to outpace the industry with... ...having you join our team! Please note, this is a full-time, 1st shift position (7am - 3:30pm, Monday - Friday).General Summary: Accountable for making...Day shiftFull timeMonday to Friday$20 per hour
...Quality Control InspectorSurestaff is immediately hiring for a detail-oriented Quality Control Inspector for a company in Mokena, IL. A successful Quality... ...dental, and vision).Available shifts:1st Shift: 3:00 AM – 3:00 PM... ...Control Inspector:1+ years’ experience in quality...Day shiftTemporary workStart working todayLocal areaImmediate startShift work3 days per week$20 - $21.5 per hour
...per hour Location: North Aurora, IL Shift: 1st Shift – 5:00 AM to 1:30 PM / 2nd Shift - 4:00PM - 12:00AM... ...This role involves a combination of MIG welding and general manufacturing duties, as... ...for operationIdentify and produce quality weldsAssist with general manufacturing...Day shiftHourly payWork at officeShift workAfternoon shift$20 - $23 per hour
...Job Title: Quality Assurance Inspector Job Description The Quality Assurance... ...Essential Skills Minimum of 1 year of experience in a... ...this position is a second-shift assignment, working Monday through... ...20,000 consultants and 5,000 clients across the U.S.,...Day shiftContract workTemporary workWork at officeMonday to FridayShift workAfternoon shift- ...seeking an ASME Welder in Chicago to assemble and weld custom bladder tanks, strainers, and valve products... ...craftsmanship under ASME codes. Typical hours are first shift Monday-Thursday 6am-4:30pm and Friday 6am-3:30pm. A $1,000 sign-on bonus is offered, with a safety-first...Day shiftRelocation package
$26 - $30 per hour
Kelly® Engineering is seeking a Quality Inspector in Downers Grove, IL for a 6-month contract-to... ...GD&T, calipers, micrometers, and CMM. 1st & 2nd shifts available with pay $26.00-$30.00 per hour... ...include a High School Diploma and 5+ years of experience in dimensional quality...Day shiftHourly payContract workShift workAfternoon shift$71.2k - $92.6k
...terminations etc. We are looking for someone who: Has a minimum of 5 years inventory / warehouse management experience Holds a... ...; or equivalent experience Shows outstanding leadership qualities and previous supervisory experience in high pace environment....Day shiftTemporary workFor contractorsWork at officeLocal areaWorldwide$33.75 - $48.5 per hour
...Salary Range: $33.75 - $48.50 Hourly Job Shift: 1st Shift Job Category: DOT - Safety Sensitive Position Summary The Sr. Quality Control Inspector leads quality and airworthiness activities... ...release of FAA 8130-3 and EASA Form 1 documents in accordance with FAA Order 8...Day shiftHourly payFull timeWork experience placementWork at officeShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Quality Weld Inspector (5:00am to 1:30pm) 1st shift. Be the first to apply!
- air quality La Grange, IL
- quality improvement rn La Grange, IL
- quality manufacturing La Grange, IL
- quality lead La Grange, IL
- supplier quality La Grange, IL
- quality inspection La Grange, IL
- quality tech La Grange, IL
- quality La Grange, IL
- quality equipment La Grange, IL
- quality management nurse La Grange, IL


