Equipment Calibration Technician - St. Albans, VT (01538)
$55k - $75kAdecco
The Industrial Calibrator is responsible for maintaining, testing and repairing a variety of electrical instrumentation and equipment.
Responsibilities:
- Calibrate, maintain and repair electronic measuring, recording, and indicating instruments and equipment used in the manufacturing of clad metal strip products.
- Diagnose, troubleshoot, and repair operating systems as necessary
- Observe, monitor and record if necessary status of utility equipment
- Make routine, periodic inspections to determine repair and maintenance work necessary to prevent breakdowns of facilities, machinery and equipment.
- Assist operators in routine maintenance procedures.
- Maintains records of scheduled and emergency maintenance procedures.
- Performs a variety of work in the maintenance.
- Maintain an acceptable level of housekeeping in work areas.
- Other duties as required.
- High School/Trade School
- 3-5 years of related experience
- Electrician license preferred
- Shop math
- Must be capable of understanding basic electronics, reading prints, and work instruction, calibrating units from test procedures
- Some heavy lifting and considerable moving of equipment may be required.
- May be required to drive fork truck, climb ladders, and work in small areas.
- Must be available for call-ins and required overtime to support critical situations.
Equal Opportunity Employer/Veterans/Disabled
Military connected talent encouraged to apply
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to
The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
- The California Fair Chance Act
- Los Angeles City Fair Chance Ordinance
- Los Angeles County Fair Chance Ordinance for Employers
- San Francisco Fair Chance Ordinance
Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
$50k - $60k
...piping, fixtures, wiring, and electrical components to form assemblies or subassemblies using hand tools, rivet guns, or welding equipment. Remove rough spots and smooth surfaces to fit, trim, or clean parts using hand or power tools. Layout, drill, ream, tap, or...SuggestedLocal areaDay shift$72k - $93.5k
...maintains, & repairs a wide variety of complex metal working equipment in a manufacturing environment. Work with AC/DC motors & drive... ...systems, control centers & panels, relays, circuit breakers, calibrating equipment, and instrumentation. Act as part of a team responsible...SuggestedTemporary workLocal areaAll shifts$25 - $40 per hour
...:30PM Mon-Fri. Job Summary The Maintenance / Facilities Technician is responsible for maintaining, repairing, and improving the functionality... ..., safety, and appearance of assigned facilities and equipment. This role supports daily operations by performing preventive...SuggestedHourly payTemporary workFor contractorsLocal areaDay shift$20 - $22 per hour
...Job Description Job Description Packaging Equipment Technician 1 Location: 88 Huntoon Memorial Hwy, Rochdale, MA 01542 Job Type: Full-Time Pay Range: $20–$22/hour Reports To: Packaging Supervisor Experience: 1+ year of experience Licensure: Required...SuggestedFull time$70k - $80k
...Travel: 30-50% Domestic Travel Field Service Mechanical Technician Job Summary: Adecco Staffing is teaming up with a local... ...troubleshooting, repair, and technical support for industrial equipment at customer facilities. This field-based position requires strong...SuggestedFull timeLocal areaDay shift$16.5 - $17.5 per hour
...safety protocols. Work Area Maintenance: Maintain a clean, safe, and organized workspace, adhering to strict personal protective equipment (PPE) and gowning requirements. Required Qualifications Education: High school diploma or GED equivalent. Skills:...Hourly payTemporary workLocal areaMonday to FridayShift workDay shift$16.5 - $17.5 per hour
...Package completed products and prepare customer orders for shipment Use hand tools, light power tools, and computer-controlled equipment Follow work instructions and quality standards to ensure accurate assembly Maintain a clean and organized work area Qualifications...Hourly payTemporary workLocal areaMonday to FridayDay shift- Talenique-Inc in Westborough, MA is seeking a detail-oriented Inspector to join our Quality Control team. You will visually inspect printed circuit boards (PCBs) and assemblies during production to ensure products meet quality and accuracy standards. The role demands...
- NOW HIRING: MA LICENSED ELECTRICIANS Massachusetts | Immediate Start | Ongoing Projects We are actively hiring Massachusetts Licensed Electricians for multiple ongoing residential, commercial, and multi-residential projects. We have both prevailing...Weekly payImmediate start
- ...Liquid Chromatography and Mass Spectrometer instruments and their components.Follow Standard Operating Procedures (SOPs) to test and calibrate electronic field tools.Assist with in-house logistics and inventorying of parts or instruments.Experience, Skills and Core...Night shift
$25 - $35 per hour
...Job Title: Cable Technician Location: Franklin, MA Pay Rate: $25-$35/HR Company Summary: Our... ...types of voice and data cables as well as security/access control equipment. MUST be comfortable working from a lift. Job...Work experience placementWork at office$27.06 - $35.22 per hour
...USA Full time SUMMARY Under general supervision, the Service Technician II repairs, services, and builds standard and custom systems for... ...systems. and other related items. Assembles new and repaired equipment. Tests repaired equipment for performance and prepares for shipment...Hourly payFull timeWeekend work- ...Position Overview The Instrument Repair Technician supports the bench-based diagnosis,... ...house, bench-based diagnostics, repair, calibration, and preventative maintenance on... ...maintain service benches, tools, and test equipment in proper condition. Documentation &...
$26 - $31 per hour
...:30pmJob SummaryCresco Labs is seeking a Facility Maintenance Technician. As the Facility Maintenance Technician, you will ensure the facility... ...and plumbing troubleshooting skills to diagnose automated equipment.Hands-on experience in installation of piping systems (air,...Permanent employmentFull timePart timeLocal area- ...walks, driveway, steps and other areas of public use; Operate equipment in the course of maintaining the grounds with respect to grass... ...Human Resources Hopkinton Public Schools 89 Hayden Rowe St. Hopkinton, MA 01748 Incomplete applications are not able to...Relocation
- ...Our programs support 100% regulatory compliance and drives 98% equipment uptimeso clinicians can focus on care, not equipment issues.... ...and manuals. Ensures test equipment is working properly and calibrated within established intervals. Responds expeditiously to calls...Flexible hours
$127.3k - $165.5k
...perfect position for anyone looking at a wide array of design challenges. Our AUVs, UUVs, and ROVs span AC power (shore and charging equipment), DC power (battery systems and conversion), sensor integration, and electromechanical (propulsion, motors, servos, actuators)...Temporary workFor contractorsWork experience placementFor subcontractorCasual workLocal areaRemote work$27 - $32 per hour
...responsible for setup, operation and maintenance of SMT processes and equipment under guidance of the Production Supervisor... ...updated resume today! Surface mount technology, surface mount technician, soldering, solder, component Pay Details: $27.00 to $32.0...Hourly payTemporary workLocal areaImmediate startDay shift- ...Lube Service TechnicianThis role will mainly be focused on fluid checks and basic maintenance. Typically, a Lube Service Technician will change a vehicle's oil, check the transmission fluid and other fluid levels, inspect various belts and filters, and check air levels...Local area
$22.55 - $53.71 per hour
...Camping World is seeking a Service Technician (Flat–Rate) for our growing team. We are ideally looking for someone with advanced diagnostic... ...and hazards related to working with electrical and welding equipment Possible exposure to environmental conditions including...Hourly payPrice workFull timePart timeWork experience placementLocal areaRemote work$25 - $30 per hour
...performing general maintenance duties. Additional responsibilities include, but are not limited to:Maintaining cleanliness of power equipment including: forklift, pallet jacks, sweeper, scrubber, tugger and clamp attachments General warehouse maintenance duties to ensure...Weekly payWork at officeFlexible hoursShift work$22.55 - $53.71 per hour
...Camping World is seeking a Service Technician (Flat-Rate) for our growing team. What You'll Do: Provide and document complete diagnostic... ...and hazards related to working with electrical and welding equipment Possible exposure to environmental conditions including heat,...Hourly payPrice workFull timePart timeWork experience placementLocal area- ...workmanship standards. Products includes electrical panels and sub-assemblies with a range of complexity for integration with capital equipment. Examples include, but are not limited to, power distribution panels, motor controls, and other types of electrical control panels...Work at office
$21 - $23 per hour
...Electrical Assembler is a manufacturing position responsible for assembling and installing electrical components used in industrial equipment and control panels. This role follows established instructions, drawings, and processes to complete quality assemblies safely and...Hourly payShift workDay shiftAfternoon shift- ...is responsible for assembling, wiring, and installing electrical control panels and sub-assemblies used in industrial and capital equipment applications. This role requires the ability to read electrical schematics, mechanical drawings, and wiring diagrams while performing...
$33 per hour
...Job Description Job Description CNC Precision Equipment Reliability & Maintenance Mechanic Company: HireNow Staffing (Direct Placement Partner) HireNow Snapshot HireNow Staffing is actively recruiting a hands-on CNC Precision Equipment Reliability & Maintenance...Hourly payFull timeContract workFor contractorsWork at officeRemote workMonday to Friday$138.6k - $154k
...technical expertise and consultation through direct involvement and as a subject matter expert when consulted to identify and resolve equipment and system problems. Has completed assigned skills and knowledge development training (applicable Advanced Engineering, EPRI, and...Temporary work$17 - $25 per hour
...skilled trades.QualificationsWhat You Need:1 year of HVAC experience (field or school-based)EPA certificationAbility to lift heavy equipment and access attics/crawlspacesStrong work ethic and customer-focused attitudeMust have a valid driver's license and good driving...Hourly payFull timeLocal area- ...place surface mount parts and solder reflow the devices to the printed circuit board. Responsible for the set-up of all pieces of equipment on the SMT line, including the screen printer, the pick and place machines and the reflow oven.Essential Duties and Responsibilities...Temporary workWork at officeLocal areaFlexible hours
$24 - $28 per hour
Job Description While professional experience and qualifications are key for this role, make sure to check you have the preferable soft skills before applying if required. Benefits: ~ Health insurance ~ Opportunity for advancement ~ Paid time off ~ Parental...
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Equipment Calibration Technician - St. Albans, VT (01538). Be the first to apply!
- equipment North Uxbridge, MA
- medical equipment delivery service technician North Uxbridge, MA
- dental equipment North Uxbridge, MA
- gym equipment installer
- aviation safety equipment technician
- central office equipment installer
- equipment technician
- aircraft ground support equipment technicians
- chemical equipment repairer
- dental equipment technician




