Furnace Operator - 2nd/1st Shift
Bodycote
Job Description
Job Description
Bodycote offers:
- 1,500 Sign-on Retention Bonus.
- Paid holidays and paid time off.
- 401k match, Medical, Dental, and Vision Plans for employees and families.
- Ability to work full-time, 40 hours per week.
- 2:30 pm – 11:00 pm, Monday through Friday.
- 6:30am – 3pm, Monday through Friday.
- Must pass a pre-employment drug screen and basic physical.
Our people are the heart of our business. As the world’s largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, including some of the best engineers, scientists, and technicians in the industry. Come join our team!
Due to the nature of our business and a heavy industrial market, Bodycote deems this position to be safety-sensitive.
Based in Laconia, NH, the Heat Treater C will perform essential job functions associated with heat treatment under the direction of the General Manager to meet customer specifications, including assisting other employees as needed. Essential Job Functions (Duties and Responsibilities): The primary duties consist of, but are not limited to, the following.
- Assists with operations, control, and monitoring of heat treating and related equipment as required and written in procedures, on shop traveler, and/or customer paperwork.
- Prepares work for processing; loads and unloads furnaces, bins, fixtures, baskets, etc.
- Bring any unusual problem or irregularity to the attention of the supervisor.
- Practices and promotes safety and good housekeeping.
- Performs other tasks as assigned or dictated by position.
- This position is responsible for the care and treatment of our customers’ inventory and, as such, will perform duties in a safe and responsible manner to prevent customer loss or damage.
- Must have the ability to report for work on time, follow directions, interact effectively with co-workers, understand and follow rules and procedures, and accept constructive criticism.
Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- This position must satisfy ITAR compliance requirements; candidates must be U.S. Citizens or Permanent Resident Card Holders.
- Education – High school diploma or equivalent preferred.
- May be required to work overtime or any shift, including weekends.
- Must be able to obtain and maintain forklift operation certification.
- Must demonstrate the ability to read, write, and communicate in the English language.
Physical & Mental Demands: The following physical and mental demands consist of, but are not limited to, the following.
- Must be able to work in a standing position for extended periods of time in an industrial environment.
- Ability to bend, pull, stoop, and reach to perform functions.
- Ability to lift up to 35 lbs.
- May be exposed to heat, fumes, noise, and humidity, etc.
- Must have the cognitive and mental capacity to perform essential job functions.
- Must be able to communicate effectively orally and in writing.
- Visual acuity to read documents, computer screens, files, etc.
- Ability to hear in person and via phone.
The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Bodycote reserves the right to revise or change job duties and responsibilities as the need arises.
$20 - $22 per hour
...limited to, the following. Assists with operations, control, and monitoring of heat... ...work for processing; loads and unloads furnaces, bins, fixtures, baskets, etc. Bring... ...May be required to work overtime or any shift, including weekends. Must be able to...Day shiftAfternoon shiftPermanent employmentFull timeContract workLocal areaRelocation packageMonday to FridayShift work$19 - $20 per hour
...the Laconia NH area, with their search for Machine Operators ! These positions are temp-to-hire, with overtime... ...options and additional incentives! Schedule + Pay : ~1st Shift - Monday - Thursday 6AM - 4PM ~2nd Shift - Monday - Thursday 4PM - 2AM $19-20+ BOE...Day shiftAfternoon shiftHourly payTemporary workLocal area- ...STS Aerospace in Laconia, NH is searching for a Convolutor Operator to join the team. This position is responsible for Set up and... ...accommodations may be made to enable individuals with disabilities. 2nd Shift: Monday - Thursday, 3:15 -1:45AM; $1.00 Shift Differential...Day shiftAfternoon shiftTraineeshipFlexible hoursShift work
- ...in Laconia, NH is searching for a Polish Operator Trainee to join the team. This position... ...enable individuals with disabilities. 2nd Shift: Monday - Thursday, 3:15PM - 1:45AM; $1.0... ...Differential **Must be able to train on 1st Job Description Essential Duties...Day shiftAfternoon shiftTraineeshipFlexible hoursShift work
$19 per hour
...company in Franklin, NH to hire Machine Operators, Press Brake Operators, and Saw... ...opportunities across multiple departments and shifts. Franklin, NH | Full-Time |... ...Starting Pay: $19.00/hour 1st Shift: 7:00 AM – 3:00 PM 2nd Shift: 3:00 PM – 11:00 PM (+10% Shift...Day shiftAfternoon shiftFull timeTemporary workShift workNight shift$20 - $30 per hour
...Description Job Description Job Title: CNC Lathe Machinist B 1st Shift: $20-30/hr 2nd Shift: $22-33/hr 3rd Shift: $31.20-45.60 Job... ..., you will work in the machine shop to support setups and operate CNC machines efficiently. You will be responsible for reading...Day shiftAfternoon shiftWeekly payPermanent employmentContract workTemporary workWork at officeNight shift- ...disability, age, or veteran status. About the Role: The Machine Operator role is critical in ensuring the efficient and safe operation... ...equipment, minimize downtime, and contribute to continuous improvement initiatives. 1st shift, 2nd shift and 3rd shift availableDay shiftAfternoon shiftTemporary workNight shift
- ...Job Description Job Description Great temp. to hire 1st shift position with a Laconia , NH area facility . You will be trained... ...through a anodize line in a continuous method bt working with line operators to ensure all chemicals and equipment are up to specifications...Day shiftTemporary workWork at office
- ...Laconia, NH is searching for a Fabrication Mechanic - Marking Operator to join the team. Under the general direction of the... ...accommodations may be made to enable individuals with disabilities. 2nd Shift: 3:15PM - 1:45AM; Monday - Thursday with $1.00 differential...Day shiftAfternoon shiftFlexible hours
$23.7 per hour
...Adecco Staffing is working with a high-level manufacturing facility in Laconia, NH who is looking to hire additional Setup Operators on 2nd and 3rd shift! ***This is a DIRECT HIRE opportunity*** Pay Rate : ~2nd Shift: $23.70 per hour ~3rd Shift: $24.78 per hour...Afternoon shiftHourly payTemporary workLocal areaMonday to FridayNight shift- ...great temp. to hire opportunity with a Laconia , NH manufacturing facility . The position is 2nd shift ( 2:45 pm -11:15 pm ) Mon. -Fri . If you have CNC Set up & Operate experience and are seeking a position that offers a small group , low stress work environment...Afternoon shiftTemporary work
- ...Description Great Temp. to Hire opportunity with a Laconia , NH manufacturing facility ! 1st shift position 6:30 am -3:00 pm . Mon.-Friday + OT as required You will operate the saw equipment used in the saw room to cut materials to length per customer...Day shiftHourly payTemporary workShift work
- ...challenges, think creatively and be a part of our exciting growth journey. STS Aerospace in Laconia, NH is searching for a Polish Operator 2nd Shift to join the team. This position is responsible for cleaning, deburring, polishing, grit blasting, and/or grinding...Afternoon shiftShift work
- ...STS Aerospace in Laconia, NH is searching for a Clean Room Operator Trainee to join the team. This position is responsible for the daily operation of the clean room. 1st Shift - 6:45 AM - 3:15 PM 2nd Shift - Monday - Thursday, 3:15 PM - 1:45 AM with $1.00 shift...Day shiftAfternoon shiftTraineeshipShift work
- ...think creatively and be a part of our exciting growth journey. STS Aerospace in Laconia, NH is searching for a Pressure Test Operator to join the team. This position is responsible for testing manufactured pieces based on specific PSI and time limits as outlined...Day shiftFlexible hours
$20 - $28 per hour
...Job Description Job Description Adecco Staffing is working with a manufacturer in Laconia, NH who is looking for a 2nd and 3rd shift Machine Operator to join their team! Job Title : Machine Operator Pay : $20-$28 depending on experience JOB PURPOSE:...Afternoon shiftHourly payTemporary workLocal areaShift workNight shift- ...is searching for a Fabrication Mechanic - Marking Operator to join the team. Under the general direction of the... ...be made to enable individuals with disabilities. 1st Shift: Monday - Friday, 6:45AM to 3:15PM 2nd Shift: Monday - Thursday, 3:15PM to 1:45AM with $1.0...Day shiftAfternoon shiftMonday to FridayFlexible hours
- ...think creatively and be a part of our exciting growth journey. STS Aerospace in Laconia, NH is searching for Mold Press Operators Trainee - 2nd Shift to join the team. This position is responsible for the operation of presses to mold and cure rubber on manufactured...Afternoon shiftTraineeshipFlexible hours
- ...Job Description Job Description Description: Second Shift 3:15pm-1:45am Monday-Thursday Description/Summary Under the... ...Manufacturing Supervisor this position is responsible for the operation of presses to mold and cure rubber on manufactured assemblies....Afternoon shiftTraineeshipFlexible hours
- ...think creatively and be a part of our exciting growth journey. STS Aerospace in Laconia, NH is searching for Mold Press Operator - 2nd shift to join the team. This position is responsible for the operation of presses to mold and cure rubber on manufactured assemblies...Afternoon shiftTraineeshipFlexible hours
- ...or sub parts Perform routine housekeeping to ensure area operates within parameters that conform to environmental and safety... ...Other duties as may be assigned. Positions available on 1st , 2nd and 3rd shift . Positions require pre employment drug screen and criminal...Day shiftAfternoon shiftTemporary workImmediate startNight shift
- ...metal tubing both rigid and flexible, for a multitude of operations, by cutting, grinding, forming, de-burring, cleaning,... ...hydraulic fuel, pneumatic, waste and exhaust installations. ~1st Shift: 6:45 AM to 3:15 PM ~2nd Shift: Monday - Thursday, 3:15 PM - 1:45 AM with $1.00...Day shiftAfternoon shiftTraineeshipFlexible hoursShift work
- ...for a Non-Destructive Testing (NDT) & FPI Operator to join the team. This position is... ...enable individuals with disabilities. 2nd Shift: 3:15PM - 1:45AM; Monday - Thursday with... ...differential Must be able to train on 1st Shift Job Description Essential Duties...Day shiftAfternoon shiftFlexible hours
- ...distribution center ! Positions currently available on 1st ( 7:00am -3:30 pm ) and 2nd shift ( 3:30 pm -12:00 am ) Clean , modern distribution... .... Positions require prior expereince with forklift operation and use of hand scanners . Working form pull sheets...Day shiftAfternoon shiftTemporary work
- ...removing rubber to buff back ends for fittings, connect fittings to hose, apply RTV, and other assembly preparations Sets up and operates abrasive, squaring, deburring, and sizing equipment such as swager or crimper. Lifts, positions, and removes work pieces from...Day shiftAfternoon shiftTraineeshipFlexible hours
- ...growth journey. STS Aerospace in Laconia, NH is searching for a 2nd Shift Fabrication Mechanic - Mold Prep & Trim associate to join the team. This position is responsible for the set up and operation of abrasive, squaring, deburring, and sizing equipment to prepare...Day shiftAfternoon shiftFlexible hoursShift work
- ...of metal tubing both rigid and flexible, for a multitude of operations, by cutting, grinding, forming, de-burring, cleaning, swaging... ...accommodation when necessary. Training available on 1st or 2nd shift 2nd Shift: Monday - Thursday, 3:15 PM - 1:45 AM with $1.00...Day shiftAfternoon shiftTraineeshipFlexible hoursShift work
- ...Aerospace in Laconia, NH is searching for a Test Lab Technician on 2nd shift to join the team. This position is responsible for testing... ...and reliability of products. Candidate must be able to train on 1st shift. Job Description Essential Duties and Responsibilities...Day shiftAfternoon shift
- ...Summer Lift Operator Go Outside and Play! Located in the heart of the Winnipesaukee Lakes Region, Gunstock Mountain Resort has been... ...(about 30 hours/week). After Labor Day, operating hours shift back to weekends only with occasional mid‑week shifts as needed...Day shiftSummer workShift workWeekend work
- ...Job Description Job Description Job Title: Machine Operator FLSA Status: Non Exempt Job Summary: Any candidate interested in being a machine operator should be highly motivated and have an ability to multitask. A machine operator should be able to work...Day shiftWork at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Furnace Operator - 2nd/1st Shift. Be the first to apply!
- security command center operator Laconia, NH
- bobcat operator Laconia, NH
- distribution operator Laconia, NH
- set up operator Laconia, NH
- call center operator Laconia, NH
- refrigeration operator Laconia, NH
- coating operator Laconia, NH
- ski lift operator Laconia, NH
- security operations center operator Laconia, NH
- refinery operator Laconia, NH



