Marine Electronics Technician
TopSide Marinas
Job Description
Job Description
Reports to: Electronics Supervisor
The Marine Electronics Technician’s responsibility is to perform the duties below on a regular basis and meet customer satisfaction standards as well as company sales and safety requirements. The position requires the team member to work 5 days per week and 8 hours per day according to the schedule agreed upon with your manager. Marina operating hours range from 5:30 a.m. - 8:00 p.m. and seasonal schedule changes may take place at management discretion.
Duties & Responsibilities:
- Diagnose and repair 110V gensets, 110/240V shore power, 12V and battery bank systems
- Diagnose and repair electronic systems, verify with NMEA and ABYC standards
- Install marine electronics such as radios, depth finders, GPS, autopilots, radar equipment, etc.
- Install other non-electronic systems as necessary
- Programming and customizing electronic systems with the customer
- Wire routing and component installation for function and appearance
- Identify potential work to the Electronics Supervisor
- Perform minor woodworking on an as-needed basis with installation of equipment
- Perform mechanical and electrical repairs on boat equipment
- Boat rigging in seasonal demand
- Demonstrate good judgment and problem-solving skills and abilities
- Perform other duties as assigned or apparent
Minimum Qualifications and Requirements:
- Act with the highest level of integrity and maintain a positive attitude
- High school diploma required
- 4 years of experience in the performance of electrical repair and installation
- Thorough working knowledge of 12-volt and 110 –volt electrical systems
- Ability to read, understand, and assess electrical wiring diagrams/schematics
- Ability to use electrical test instruments
- Must provide his/her personal electrician tools and test equipment
- Must be able to meet the physical requirements of the job
- Must be able to complete assigned work in an efficient and timely manner
- Strong work ethic and personal commitment
- Ability to work in a team environment to achieve team, department, and company goals
- Ability to be a self-starter and work independently
- Must have strong organizational skills and the ability to prioritize work
- Experience with Simrad, Garmin, Raymarine, NMEA, etc. a plus, but not required
- Experience in fields such as PLC’s, I/O protocols, FANUC, Allen Bradley, etc. also welcome to apply
Physical Requirements:
- Ability to lift and carry up to 100 lbs
- Ability to work comfortably around water
- Ability to work in tight spaces
- Ability to work at heights of up to 30 feet
- Stand, sit, walk, push, pull, climb, crawl, bend, kneel, squat, twist, reach, grasp
Company Summary:
TopSide Marinas was cofounded in 2020 as a family-owned company that acquires, owns, and operates high-quality marinas across the country. Our mission is to foster a high-quality environment where our members and guests can create lifelong memories, relax, enjoy life, and be healthy. Each of our marinas provide exceptional service, hospitality, and enthusiasm to serve your needs on and off the water. We want our members and guests to feel right at home. We care about the property’s team members by providing competitive wages, excellent healthcare coverage, and supporting a hospitable culture.
Benefits Offered:
- Medical
- Vison
- Dental
- 401(k) with company match
- PTO
- Holiday Pay
- ...Marine Electronics Technician The Marine Electronics Technician's responsibility is to perform the duties below on a regular basis and meet customer satisfaction standards as well as company sales and safety requirements. The position requires the team member to work...SuggestedSeasonal work
$50 - $68 per hour
...PCB DesignerThis role focuses on designing and laying out printed circuit boards (PCBs) with a strong emphasis on power electronics and high-frequency applications. You will create PCB layouts in Altium Designer, maintain and enhance component libraries, and support multiple...SuggestedContract workTemporary work$50 - $68 per hour
...PCB DesignerThis role focuses on designing and laying out printed circuit boards (PCBs) with a strong emphasis on power electronics and high-frequency applications. You will create PCB layouts in Altium Designer, maintain and enhance component libraries, and support multiple...SuggestedContract workTemporary work- ...is critical in the manufacturing and assembly of printed circuit boards (PCBs) that are essential components in a wide range of electronic devices. This position involves the precise and skilled soldering of electronic components onto PCBs, ensuring strong electrical...SuggestedFull timeDay shift
$25 per hour
Immediate Opening! SMS Staffing is hiring Line Mechanic near Waukegan, IL! Job Title: Line Mechanic Location: Near Waukegan IL Pay Rate: $25.00+/hr. Temp to Hire Schedule: 2nd Shift | 3:30 pm 2:00 am (Monday - Thursday) Position Summary The Line Mechanic maintains...SuggestedTemporary workImmediate startFlexible hoursAfternoon shift$27 - $33 per hour
...Job Description Job Description Job Title: Calibration Technician – Process Instrumentation Location: North Chicago, IL Hire Type: Contract (12+ Months) Target Pay Rate: $27.00 - $33.00/hour Benefits: PTO, paid holidays, BCBS medical plans, dental/...Contract workFor contractors$75k - $100k
...detailed and accurate documentation of all maintenance activities, inspections, repairs, and parts used. Work collaboratively with technicians, operators, and other departments to ensure smooth operation of equipment and address maintenance-related concerns. Follow all...Weekly payPermanent employment$35 - $38 per hour
A dynamic engineering solutions provider in North Chicago is seeking a Calibration Technician to ensure accurate calibrations and maintenance of instruments used in pharmaceutical development. The ideal candidate has over 2 years of Metrology and Calibration experience...Contract work$35 - $38 per hour
...medical plans to choose from, dental & vision plans, 401(k), and an Employee Stock Ownership (ESOP) plan. Job Summary: The Calibration Technician will ensure accurate calibrations and general maintenance of various instruments and measurement equipment used in the...Contract work- ...Waukegan National Airport is seeking an Airport Operations Technician I–III to support safety, security, and regulatory compliance under FAA Part 139 regulations. The role includes daily airfield inspections, NOTAM issuance, wildlife hazard management, and coordination...
- ...Electronics Assembly TechnicianRequired Skills & Experience Required Qualifications • High school diploma or equivalent. • Previous soldering... ....Job Description Position Summary The Electronics Assembly Technician is responsible for assembling, soldering, inspecting, and...
- ...Jones Lang LaSalle Incorporated is seeking a Mechatronics & Robotics Technician to support the Operations Maintenance team in repairing and maintaining MHE and pneumatic systems. You will install, maintain and repair automated packaging and distribution equipment and...
- ...(k) Company car Health insurance Paid time off Job Summary We are seeking a skilled and motivated Security Systems Technician with a minimum of 3 years of experience in the security industry. The ideal candidate will have hands-on experience installing, servicing...For contractors
- ...Job Summary We are seeking a dependable and experienced Fire Alarm Technician with a minimum of 3 years of hands-on experience in the installation, service, inspection, and troubleshooting of fire alarm systems. Responsibilities Install, program, test, inspect...Monday to Friday
- ...Automation Technician for Molding or Assembly MachinesLocation: Buffalo Grove or Libertyville ILTax Term (W2, C2C): AnyJob Type (Permanent/Contract): ContractDuration: 6+ monthsPay Range: $25 - $30/hrJob DescriptionThe Molding or Assembly Automation Technician is responsible...Permanent employmentContract work
$43.11 - $46.51 per hour
...state of the art facility in Pleasant Prairie! Maintenance Technician - Pleasant Prairie, WI Starting Pay: Based on Experience/Skill... ..., relays, 3 phase power, communication devices, industrial /electronic controls, and power transmission systems Read and interpret...Flexible hours- ...Job TitleRyder is immediately hiring a Permanent Full Time AGV Technician in Pleasant Prairie, WIJob DescriptionWe want the right... ...DiscountEmployee Discounts that save you money on Tools, Cars, Hotels, Electronics/Appliances, Cell Phones, Travel, and much moreSafety Gear...Permanent employmentFull timeImmediate start
$29.86 - $38 per hour
...Job Description Job Description Job Title : Molding Automation Technician Location: Libertyville, IL Pay : $29.86 – $38/hour (8:00am – 4:30pm) M–F (Will Shift into 223 schedule in 1 year) About Us: We are a manufacturing organization focused on high...Temporary workShift work$75k - $100k
...detailed and accurate documentation of all maintenance activities, inspections, repairs, and parts used. Work collaboratively with technicians, operators, and other departments to ensure smooth operation of equipment and address maintenance-related concerns. Follow all...Weekly payPermanent employment$33.89 - $49.71 per hour
...20 hours (prorated based on start date)• Shift bonus for weekend hours• Sign-on bonusResponsibilities:The Engineering Automation Technician provides high-level automation, mechanical, and electrical support for OEM filling equipment (e.g., Optima, Fedegari, Franz Ziel,...Full timeFor contractorsH1bVisa sponsorshipWork visaShift workWeekend workDay shift- Jones Lang LaSalle Incorporated in Kenosha, Wisconsin is seeking a Mechatronics & Robotics Technician to support the Operations Maintenance team. You will install, maintain and repair automated packaging and distribution equipment, and mentor junior technicians. Qualified...Night shiftWeekend work
- ...Knowledge of ASME A17.1 and A18.1 Ability to read and understand installation blueprints and drawings including all electrical and electronic schematics and knowledge with a focus on industrial mechanics CERTIFICATES, LICENSES OR REGISTRATIONS: ~ Certified...ApprenticeshipNight shift
- Jones Lang LaSalle (JLL) is seeking a Sr. Mechatronics & Robotics Technician to lead service technicians in installation and repair of automated packaging and distribution equipment. You will support Operations Maintenance by designing solutions, managing projects, and...
- Medix in Pleasant Prairie, WI is seeking a Surgical Technician to scrub across general, orthopedic, robotic, and complex specialty procedures. This role offers exposure to high-tech ORs featuring robotics and advanced imaging, with a collaborative surgical team and supportive...Shift work
$28.3 - $29.3 per hour
...Mechatronics & Robotics Technician Position Type: Full-Time, Direct-Hire Location: Kenosha, WI Pay Range: $28.30/hour - $29.30/hour Job Responsibilities: Design, develop, and maintain automated systems to enhance operational efficiency. Implement robotics...Full time$28.3 - $29.3 per hour
Job Description: Mechatronics & Robotics Tech Location: Kenosha, WI Direct-Hire/Permanent Position Pay: $28.30 - 29.30 Job Responsibilities: Perform routine maintenance and repair tasks on buildings and facilities to ensure operational efficiency. Conduct...Permanent employment
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Marine Electronics Technician. Be the first to apply!
- electronic Waukegan, IL
- project manager electronics Waukegan, IL
- electronics supervisor Waukegan, IL
- electronic manager Waukegan, IL
- electronic health record specialist Waukegan, IL
- electronic assembly manufacturing Waukegan, IL
- marine captain
- marine advisor
- marine travel consultant
- fendercare marine australia



