Sign up to access all features of our service.
  • Job search
  • Favorites
  • Create a CV
    New
  • Salaries
  • Subscriptions

Interior Technician II

Citadel Aviation

Interior Technician II

To assist in and perform the removal, repair, installation, and fabrication of custom VIP/VVIP aircraft interior assemblies and components including cabinetry, monuments, galleys, lavatories, seats, sidewalls, ceilings, floorboards, insulation, soft goods, and veneer in accordance with the applicable Federal Aviation Regulations (FARs), the Repair Station Quality Manual (RSQM), OEM specifications, engineering drawings, and STCs. The Interior Technician II performs interior installations and repairs with growing independence.

This role performs the full range of interior installation and repair tasks with increasing independence, and takes on more complex interior installation work. Success in this role looks like proficiency on routine tasks without assistance, sound judgment on non-routine issues, and the ability to guide junior technicians informally.

This position reports to the Manager of Aircraft Interiors and works closely with Lead Technicians and senior technicians to support the on-time, airworthy re-delivery of aircraft.

Responsibilities

Interior Installation & Repair

Independently fit, align, and install decorative interior components including galleys, lavatories, closets, bulkheads, door surrounds, and window shades.

Apply proper hardware torqueing, sealant application, and fastening techniques to interior installations, and read/interpret engineering drawings and cabin installation documents.

Check completed work to ensure quality fit prior to inspection.

Perform floorboard, lower dado panel, wet-barrier mylar, seat, decorative sidewall, ceiling, valance, door-surround, window-shade, moon-mat, and insulation removal and installation.

Inspect, remove, repair, and install aircraft interior pieces including doors, galleys, seats, bulkheads, floorboards, emergency path lighting, gill liners, closets, and lavatories.

Compliance & Documentation

Become familiar with and follow the requirements of the RSQM, Federal Aviation Regulations, Airworthiness Directives, advisory circulars, and manufacturers' service bulletins. Never begin any maintenance unless in possession of the proper, current, and applicable approved or acceptable data.

Ensure the work area is kept to the highest standards of safety and compliance at all times, maintain VIP/VVIP interior presentation standards, and ensure good housekeeping practices are performed at all times.

Perform proper tagging of aircraft components, parts, and panels, and perform documentation procedures and sign-offs in accordance with the Repair Station Quality Manual and respective task requirements.

Shop & Communication

Comply with the company FOD program and tool control program; ensure tooling, GSE, and ground equipment are returned to their proper storage area following use.

Maintain close and frequent communication with the Lead Technician, reporting progress and any roadblocks that could impact re-delivery, and deal with customers in a cordial, respectful, and professional manner.

Take part in any required training as determined by the company.

Requirements

Required

High school diploma or equivalent (GED).

35 years' experience in the fabrication, repair, and installation of custom VIP/VVIP aircraft interiors.

Able to fit, align, and install decorative interior components (galleys, lavatories, closets, bulkheads, door surrounds, window shades) with limited supervision.

Proficient in the use of aviation tools and equipment for interior installations, including hardware torqueing, sealant application, and fastening.

Able to read and interpret engineering drawings, cabin installation documents, and technical manuals.

Ability to read and interpret work instructions, standard operating procedures, and safety documentation written in English, and to communicate clearly in English with coworkers and supervisors as required to perform the essential functions of the position.

Must report for assignment with a personal set of standard trade-specific tools.

Holds a current, valid driver's license, where required to perform the essential functions of the position.

Authorized to work in the United States and able to pass pre-employment and applicable DOT/FAA drug-and-alcohol screening (safety-sensitive position).

Preferred

Valid FAA Mechanic Certificate with an Airframe rating.

Experience with VIP/VVIP business jets.

Familiarity with soft goods, veneer, and lighting integration.

Aircraft interior maintenance experience on current fleet types being maintained or modified by the Repair Station.

Working Conditions

Work is performed in aircraft hangars, maintenance shops, and on or inside aircraft; considered MEDIUM work with frequent lifting up to 20 lbs and occasional lifting up to 50 lbs.

Requires frequent walking, standing, bending, kneeling, climbing, and working through airframe, engine, and undercarriage openings on ladders, scaffolds, hoists, and lifts; exposure to noise, dust, moving equipment, confined spaces, and elevated work stands. PPE and OSHA/company safety protocols required at all times.

Travel not typically required; may occur on occasion for offsite support, AOG support, or training.

May require flexible shifts, overtime, weekends, or holidays based on project demand.

Knowledge, Skills, and Other Attributes

Solid mechanical aptitude and working knowledge of aircraft interior systems, components, and installation methods.

Able to read and interpret engineering drawings, cabin installation documents, and technical manuals (AMM, IPC, and customer-supplied supplements).

Proficient use of hand and power tools, including hardware torqueing, sealant application, and fastening techniques.

Ability to work independently on routine and mid-complexity interior tasks with limited supervision, and as part of a team.

Strong attention to detail, fit quality, and VIP/VVIP presentation standards.

Commitment to safety, FOD control, and tool accountability.

Dependability, strong work ethic, and professionalism when interacting with team members and customers.

Good communication, organizational, and time-management skills.

Equal Employment Opportunity

Citadel Aviation, LLC. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, status as a protected veteran, or any other protected status in accordance with applicable federal, state, and local laws.

About Citadel Aviation

Citadel Aviation has grown from a startup vision into a global leader in V/VVIP aircraft completions, maintenance, modifications, and luxury interiors. Located in Lake Charles, Dallas, and serving customers onsite where they're at, our teams deliver work on some of the most sophisticated narrow and wide body aircraft in the world. We have significantly expanded project volume since 2019, and that growth was built by people who take pride in doing the work right. Whatever your role, Citadel is a place to bring what you know and build what comes next.

Citadel Aviation
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Interior Technician II in Dallas, TX vacancy
  •  ...Ground Service Technician II The Ground Service Technician II assists the Facilities and Ground Support Equipment (GSE) Maintenance...  ...aircraft completions, maintenance, modifications, and luxury interiors. Located in Lake Charles, Dallas, and serving customers onsite... 
    Suggested
    Work experience placement
    Local area
    Night shift

    Citadel Aviation

    Dallas, TX
    3 days ago
  • $22 per hour

     ...Job Description Job Description Field Service Technician II – Part-Time. Location:  Dallas / Ft. Worth, TX. At NCR Atleos, our Field Service Technicians are the face of our brand—solving problems, supporting customers, and keeping essential systems running.... 
    Suggested
    Hourly pay
    Full time
    Contract work
    Part time
    Second job
    Local area
    Flexible hours
    Shift work
    Weekend work
    2 days per week

    NCR Atleos

    Dallas, TX
    11 days ago
  • $40 - $55 per hour

    NETA Field Service Technician II Location US-TX-Irving ID 2026-2485 Category Technician Position Type Full-Time Remote No Overview Skills: Field Service Test Technicians travel to customer sites (industrial... 
    Suggested
    Full time
    Remote work
    Visa sponsorship
    Flexible hours
    Night shift

    Shermco Industries

    Irving, TX
    2 days ago
  • $19.95 - $26.38 per hour

     ...Maintenance Technician II DHA Headquarters - Dallas, TX 75212 Overview Salary Range $19.95 - $26.38 Hourly Position Type Full Time...  ...housing units for occupancy; including repair, cleaning, and interior painting and general maintenance, etc. Repair or replace... 
    Suggested
    Hourly pay
    Full time
    Temporary work
    Trial period
    Flexible hours

    DHA

    Dallas, TX
    3 days ago
  • $28 - $40 per hour

     ...commercial real estate services and investment firm. To learn more about Pearce visit Your Impact As a Solar Field Service Technician II (Utility-Scale / PV Repair), you'll work on large, utility-scale solar farms—not residential or rooftop systems. You'll handle... 
    Suggested
    Hourly pay
    Daily paid
    Full time
    Work at office
    Local area
    Flexible hours

    Pearce Services

    Dallas, TX
    10 days ago
  •  ...Under the general direction of the Manager TSC Production, the Electronics Technician II’s primary role is testing, troubleshooting and repair to component level FWA electronics used in the communications industry. In addition to maintaining the highest quality standards... 
    Remote work
    Monday to Friday
    Flexible hours

    Sagent

    Addison, TX
    2 days ago
  • $42 - $46 per hour

    # Field Service Technician IIDallas, Texas, US · Full-time · Associate**Workplace type**Remote#### About The Position**Field Service Technician II – Central US****Remote Position – Primarily Covering the Central U.S., with East and West Coast Coverage as Needed**This position... 
    Hourly pay
    Full time
    Live in
    Remote work
    Worldwide

    Alma Lasers

    Dallas, TX
    3 days ago
  • $21.5 - $30.75 per hour

     ...Field Service Technician II Location US-TX-Irving Company Canon U.S.A., Inc. Requisition ID 35562 Category Field Service Position Type Full-Time Workstyle Full-Time On Site About the Role Spotting... 
    Hourly pay
    Full time
    For contractors
    For subcontractor
    Casual work
    Work at office
    Local area
    Shift work

    Canon U.S.A., Inc.

    Irving, TX
    2 days ago
  •  ...We're looking for Field Service Technicians with strong testing and troubleshooting experience who are ready to take on challenging fieldwork...  ...interpret schematics and one-line diagrams ~ NETA Level II certification preferred or active pursuit of certification... 
    Daily paid
    Work at office

    RMS Energy

    Dallas, TX
    2 days ago
  •  ...Electro-Mechanical Avionics Technician The Electro-Mechanical Avionics Technician is responsible...  ...Electro-Mechanical Avionics Technician II: In addition to the above, is also...  ...of aerospace (propulsion, equipment and interiors), space and defense. Its mission is to contribute... 
    Full time
    Work experience placement
    Work at office
    Shift work
    Afternoon shift

    Safran

    Grand Prairie, TX
    1 day ago
  • $37.14 per hour

     ...Job Overview: The Maintenance Mechanic II - is responsible for troubleshooting, repairing, and maintaining a variety of mechanical and electrical manufacturing equipment such as motors, conveyor systems, pneumatic and hydraulic systems, production machines, boilers... 
    Full time
    Shift work
    Night shift
    Weekend work

    Keurig Dr Pepper

    Irving, TX
    23 hours ago
  •  ...Field Technician II Electric Power Systems (EPS) is a NETA-accredited independent electrical testing and engineering organization specializing in electrical acceptance testing, commissioning, and maintenance for clients across Data Centers, Utility, Generation, Renewables... 

    EPS

    Richardson, TX
    20 hours ago
  • $26.41 - $34.13 per hour

     ...Field Service Technician II Dallas (Garland), TX Bearcom Garland - Garland, TX 75041 Overview Salary Range $26.41 - $34.13 Hourly Description About BearCom: ~ Largest Distributor of Wireless Voice, Data, and Video Solutions in North America ~40+ Years... 
    Hourly pay
    Temporary work
    Night shift

    BearCom

    Dallas, TX
    10 hours ago
  •  ...Job Description Job Description ProStaff Workforce Solutions is seeking an Electronics Technician I, II, III for privately owned manufacturing company in Richardson, TX 75081. If interested, we would be excited to connect and discuss this opportunity in more... 
    Weekly pay
    Contract work
    Monday to Friday
    Flexible hours
    Night shift
    Weekend work
    Day shift

    ProStaff Solutions Inc

    Richardson, TX
    4 days ago
  •  ...Position Overhead Crane Service Technician II Dallas, TX The Service Technician II will report to a customer site to inspect, troubleshoot, repair, and modify electric overhead bridge cranes and related material handling equipment. Minimum Qualifications 3-5 years of crane... 
    Weekly pay
    Temporary work
    Night shift

    DeShazo

    Richardson, TX
    20 hours ago
  • $27.6 - $44.29 per hour

     ...Service Technician II Daikin Applied is seeking a full-time Service Technician II. In this role, you will be responsible for diagnosing, repairing, and performing preventative maintenance for commercial and industrial HVAC equipment. The responsibilities will increase... 
    Hourly pay
    Full time
    Local area
    Night shift

    Daikin Applied Americas

    Grand Prairie, TX
    2 days ago
  • Job Description Job Description POSITION SUMMARY Under general supervision, provides service to customer base at various site locations or service center. Conducts routine to moderately complex preventative maintenance, trouble-shooting procedures, removes and replaces...
    Full time
    Work at office
    Monday to Friday
    Shift work
    Day shift

    Ebara Technologies - USA

    Dallas, TX
    24 days ago
  • $29.45 - $33.76 per hour

     ...Job Description Job Description Title: Wireless Communications Service Technician Location: Redondo Beach, CA Duration: Direct Hire Compensation: $29.45 – $33.76 per hour Work Requirements: Must be authorized to work in the U.S. Skillset / Experience... 
    Hourly pay
    Work at office
    Flexible hours
    Night shift

    INSPYR Solutions

    Garland, TX
    24 days ago
  • $21.5 - $30.75 per hour

     ...Traveling Field Service Technician II Location US-KS-Kansas City | US-IL-Chicago | US-MO-St. Louis | US-TX-Dallas Company Canon U.S.A., Inc. Requisition ID 34242 Category Field Service Position Type Full-Time... 
    Hourly pay
    Full time
    For contractors
    For subcontractor
    Casual work
    Work at office
    Local area
    Shift work
    Night shift

    Canon U.S.A., Inc.

    Dallas, TX
    3 days ago
  • $22.63 per hour

     ...Field Service Technician II Part-Time Location: Dallas/Fort Worth, TX At NCR Atleos, our Field Service Technicians are the face of our brandsolving problems, supporting customers, and keeping essential systems running. As a part-time technician, you'll enjoy flexible... 
    Hourly pay
    Full time
    Contract work
    Temporary work
    Part time
    Second job
    Local area
    Flexible hours
    Shift work
    Weekend work
    2 days per week

    NCR Atleos

    Dallas, TX
    10 hours ago
  • $26.16 per hour

     ...Warehouse Service Technician IIJob Category: FacilitiesFull-TimeRate: $26.16 USD per hourLocation: Dallas, TX 75212, USADescriptionWarehouse Service II TechnicianWork Schedule:D SHIFT 6PM-6AM FRIDAY THROUGH SUNDAY; (MANDATORY OVERTIME NEEDED MONDAY THROUGH THURSDAY DURING... 
    Full time
    Temporary work
    Part time
    Seasonal work
    Worldwide
    Monday to Thursday
    Shift work
    Night shift
    Weekend work

    Geodis

    Dallas, TX
    2 days ago
  •  ...Make Ready Technician II The Make Ready Technician II is a key associate in providing outstanding maintenance and repair services for...  ...patios, railings, mailboxes Tile, carpet, and flooring Interior/exterior lights Fireplaces Gas fixtures and appliances... 
    For contractors
    Work at office
    Immediate start
    Weekend work
    Afternoon shift

    BH

    Dallas, TX
    2 days ago
  •  ...inspiration, Sensaria thinks bigger and bolder to unlock opportunity and achieve incredible results together. I. Role Purpose Maintenance Technician II independently maintains, troubleshoots, and repairs automated production and fulfillment equipment in a fast-paced, high-volume... 
    Shift work
    Weekend work
    Afternoon shift

    Sensaria

    Grand Prairie, TX
    2 days ago
  •  ...ordinating support plans with customer management. Performs start-up, warranty, paid service, and service contract activities. Performs TIER II start-ups within established time frames. Assists on TIER III start-ups. Provides technical assistance to less experienced Applied... 
    Full time
    Contract work
    Relocation

    Applied Materials

    Richardson, TX
    3 days ago
  •  ...Maintenance Technician IIUnion Technologies is reindustrializing America's defense manufacturing base with a first-of-its-kind Factories-as...  ...guaranteeing deterrence for the century ahead.As a Maintenance Technician II, your primary responsibility is to independently perform... 
    Flexible hours

    Union Tech

    Dallas, TX
    4 days ago
  • $67.05k

     ...the installation, maintenance and repair work involving electrical, plumbing, HVAC and steam fitting trades. The Maintenance Mechanic II works independently in providing instruction for creating methods in order to accomplish assigned tasks. Work is subject to review... 
    Permanent employment
    Local area

    Onondaga Community College

    Syracuse, NY
    1 day ago
  •  ...application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Maintenance Technician II Regular Full Time Technical Temple, TX, US 29 days ago Requisition ID: 1267 When a machine decides it’s done cooperating,... 
    Full time
    Local area
    All shifts

    Texas Hydraulics

    Dallas, TX
    2 days ago
  •  ...Electronic Avionics Technician The Electronic Avionics Technician is responsible for diagnosing and repairing units down to the Shop...  ...operating in the fields of aerospace (propulsion, equipment and interiors), space and defense. Its mission is to contribute sustainably... 
    Work experience placement
    Work at office
    Afternoon shift

    Safran

    Grand Prairie, TX
    10 hours ago
  •  ...Mobile Diesel Technician Level IICox Fleet keeps your fleet moving!Headquartered in Indianapolis, Cox Fleet has grown to become one of the...  ....Cox Fleet is currently hiring a Mobile Diesel Technician Level II.The Mobile Diesel Technician Level II will be responsible for performing... 
    Weekly pay
    Currently hiring
    Local area

    Fleet Services by Cox Automotive

    Syracuse, NY
    4 days ago
  •  ...Maintenance Technician II McCormick & Company, Incorporated, a global leader in flavor, is seeking a Maintenance Technician II reporting to a Maintenance Team Manager. This individual will work in Dallas, TX. With more than $5 billion in annual sales, the Company manufactures... 
    Apprenticeship
    Work at office
    Shift work
    Weekend work

    Mccormick

    Irving, TX
    2 days ago

Do you want to receive more vacancies?

Subscribe and receive similar vacancies to Interior Technician II. Be the first to apply!