Electrical Assembler

Job Description

Job Description

Electrical Assembler

Location: Houston, TX

Onsite Flexibility: Onsite

Contract Details

• Position Type: Contract
• Contract Duration: 12 months
• Pay Rate: $20.50 / Hour (USD)
• Shift / Schedule: 6:00 AM 3:30 PM, Monday Friday. Overtime may exceed these hours and can be mandatory.
• Work Authorization: Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Job Summary

In this role, you will assemble, fit, and mount sub-assemblies, components, and standard and near-standard fixed assemblies in Motor Control Centers , Enclosed Control, and related assemblies and sub-assemblies. You will perform assembly required for test preparation and final inspection, and assemble and wire units, relay panels, panel boards, space heaters, and control panels. You will bend and install power cable and leads, fabricate pre-cable unit, panel and MTB harnesses, and power leads, and use established power checking procedures and equipment to verify electrical/mechanical integrity of units assembled, while staging parts for customer orders.

Key Responsibilities

• Work from oral or written instructions from supervision and/or prints, inspection reports, manufacturing information sheets, and standard or near-standard wiring diagrams.
• Utilize manufacturing information sheets, determine necessary parts, write requisitions, and obtain materials from stock areas.
• Assemble and fit parts and components to form sub-assemblies, or completed assemblies.
• Assemble and wire control devices, cutting wires to length.
• Make adjustments to ensure correct alignment and clearances.
• Install units, pan assemblies and cover up steel, meters, kirk keys, pull boxes, reactors, relays, fuses, MTB assemblies, panel boards, space heaters, transformers, etc. by mounting/bolting into place. Assemble and install bus work such as lug adapters, cross over bus, splices, etc.
• Make pre-bent cable unit, MTB and control panel harnesses using pre-cable boards, control panels and hand crimp lugs if necessary. Cut, install and connect wire and/or cable in units where circuitry requires additional relays, timers, fuses, etc. Cut, form and connect control wire, power wire and cable, point to point on units, relay panels, control panels, and space heaters. Make solder connections.
• Modify standard assemblies or doors as received. May alter hole cutouts, etc. using hand or power tools.
• Make wiring changes as required. Make necessary mechanical repairs, replacements or changes. Use buzzer as required to assure proper wiring connections.
• Use a floor-operated overhead crane and jib cranes. Move units, harnesses, device panels, etc. from one area to another.
• Mark wires, devices or terminals as required. Identify harness and/or panels with job and unit number. Apply component ID labels such as "Brady Markers" or "Dymo" labels if required. Identify work and maintain records as required.
• From information provided, stage necessary component parts/material in a manner which allows for the smooth flow of order activities through the assembly/manufacturing process.
• Other duties as assigned.
• Ensure compliance where applicable with systems and/or programs such as, but not limited to ISO 9000-2000, ISO 14001, Underwriters Laboratory, NEMA, etc. Participate in and demonstrate understanding of other programs such as Client Business System (EBS), Client Safety Process (ESP), etc.
• Determine the quality of work reporting problems to area supervisor or Quality Control personnel. Maintain piece count and associated records where applicable.
• Read shop orders and drawings to determine assembly procedures such as component types and configuration, mounting locations and clearances required.
• Wear all safety equipment and observe all hygiene requirements as specified and directed.
• Maintain equipment and work areas in a clean and orderly manner.

Health and Safety Responsibilities Employee

• Know and follow established job-specific and facility-wide health and safety procedures and rules.
• Bring health and safety issues, unsafe acts, and safety suggestions to management's attention or correct those they can.
• Actively participate in accident, injury, and illness prevention activities.
• Develop job safety analysis and safe working procedures.
• Identify and correct hazards and unsafe conditions.
• Conduct accident, near-miss accident, or potential hazard investigations.
• Keep other employees aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety.
• Maintain housekeeping in work area.
• Maintain health and safety equipment in good working order.
• Actively participate in health and safety training and demonstrate competency based on training received.
• Participate actively in providing suggestions for the health and safety program improvement.
• Know and implement regulatory compliance requirements in their work area.

Education Requirements

• High school diploma or GED required.
• Manufacturing or production experience preferred.

Benefits

• Medical, Vision, and Dental Insurance Plans
• 401k Retirement Fund

Work Environment / Physical Requirements

• Use of a floor-operated overhead crane and jib cranes required.
• Use of hand and power tools required.
• Overtime may exceed scheduled hours and can be mandatory.

About the Client

This client is a global power management company operating in more than 100 countries, with revenues of approximately $20.8 billion and approximately 160,000 employees worldwide. Founded in 1911, the organization develops intelligent power management technologies spanning electrical systems, aerospace components, vehicle powertrain solutions, and data center infrastructure solutions embedded in the critical systems that keep modern society running. The company has been named in Newsweek's list of Global Most Loved Workplaces and employs teams of electrical engineers, power systems specialists, aerospace technicians, software developers, and supply chain professionals across its many global divisions.

About GTT

GTT is a minority-owned staffing firm and a subsidiary of Chenega Corporation, a Native American-owned company in Alaska. We highly value diverse and inclusive workplaces and support Fortune 500 organizations across banking, financial services, technology, life sciences, biotech, utilities, and retail sectors throughout the U.S. and Canada.

Job Number: 26-14693

Industry: Engineering

#gttjobs

\nCompany Description

Global Technical Talent is a subsidiary of Chenega Corporation ( with over 1.3 billion US$ in revenue and 5800 US employees. We provide Total Talent Solutions, Global staffing, SOW, RPO, Direct Sourcing, and Global Payroll with physical offices in US, Canada, and India. GTT Digital headquartered in Toronto specializes in providing high-tech digital and banking talent to some of the nation’s largest financial institutions. As a leader in the staffing industry for over 22 years, we have become one of the largest staffing firms in the New England region, working with Fortune 500 clients and cutting-edge, technology-driven recruiting infrastructure.

We are a Native American-owned, economically disadvantaged corporation that highly values diverse and inclusive workplaces. Our clients and partners are among the most successful and innovative organizations in the world. Our top clients are Fortune 500 banking, insurance, and financial services firms, some of the nation’s largest life sciences, biotech, utility, and retail companies, and prestigious educational institutions in the Ivy League tier.


There is always a new opportunity for success when you look through all of the open job opportunities on our website’s career page. Just click on this link:


Awards

SIA’s Fastest Growing Staffing Firm: 2023 and 2015
SIA’s Best Staffing Firm to Work for: 2019 -2023
Inc 5000 Fastest Growing Private Company: 2023, 2022, 2016, 2015
Randstad Preferred Supplier: 2020 - 2023
TechServe Alliance Excellence Award. 2019
NH Business Magazines Fast 5 fastest growing companies
Ernst & Young Entrepreneur of the Year Finalist: 2015

Company Description

Global Technical Talent is a subsidiary of Chenega Corporation ( with over 1.3 billion US$ in revenue and 5800 US employees. We provide Total Talent Solutions, Global staffing, SOW, RPO, Direct Sourcing, and Global Payroll with physical offices in US, Canada, and India. GTT Digital headquartered in Toronto specializes in providing high-tech digital and banking talent to some of the nation’s largest financial institutions. As a leader in the staffing industry for over 22 years, we have become one of the largest staffing firms in the New England region, working with Fortune 500 clients and cutting-edge, technology-driven recruiting infrastructure.\r\n\r\nWe are a Native American-owned, economically disadvantaged corporation that highly values diverse and inclusive workplaces. Our clients and partners are among the most successful and innovative organizations in the world. Our top clients are Fortune 500 banking, insurance, and financial services firms, some of the nation’s largest life sciences, biotech, utility, and retail companies, and prestigious educational institutions in the Ivy League tier.\r\n \r\nThere is always a new opportunity for success when you look through all of the open job opportunities on our website’s career page. Just click on this link: \r\n \r\nAwards\r\n\r\nSIA’s Fastest Growing Staffing Firm: 2023 and 2015\r\nSIA’s Best Staffing Firm to Work for: 2019 -2023\r\nInc 5000 Fastest Growing Private Company: 2023, 2022, 2016, 2015\r\nRandstad Preferred Supplier: 2020 - 2023\r\nTechServe Alliance Excellence Award. 2019\r\nNH Business Magazines Fast 5 fastest growing companies\r\nErnst & Young Entrepreneur of the Year Finalist: 2015