SHEET METAL MECHANIC

Summary THIS IS A NATIONAL GUARD TITLE 32 INDEFINITE EXCEPTED SERVICE POSITION. This National Guard position is for a SHEET METAL MECHANIC, Position Description Number D1371000 and is part of the CO 140 MXG, National Guard. Responsibilities Primary purpose is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and nonpowered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing. Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Repairs cracks in aircraft skin. Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Aligns and balances component structures and air frame using precision measuring instruments and levels. Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and nonpowered tools and equipment. Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Performs fabrication of local manufactured items requited for aircraft and equipment. Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Identifies metal corrosion. Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Identifies, blends, stores, controls, and disposes of hazardous materials such as acids, caustics, alcohols, solvents, cleaners, primers and surface coatings used for corrosion removal, treatment and protection in accordance with applicable directives. May operate the wash rack. May assist in training of drill status guard members and in maintenance of publication files of applicable technical orders, regulations, manuals and local directives. Prepares for and participates in various types of readiness evaluations such as MEI, ORI, IG and UE inspections mobility and command support exercises. Performs other duties assigned. Requirements Conditions of Employment Qualifications Military Grades: E-1 through E-5 1. Specialized experience will be used to determine qualifications for the announced position. 2. An applicants RESUME must provide, in detail, how they meet each specialized experience listed below. 3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience. 4. If education or a degree is required as part of the "Specialized Experience", you must include transcripts. DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet. You will be immediately disqualified if you fail to include specialized experience in your resume. Must have at least 18 months of Specialized Experience in each of the following: 1. Experience in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. 2. Experience using more complicated shop tools and equipment. 3. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. 4. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments. Education Education cannot be substituted for Specialized Experience for this position. Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application. 1. If you would like to inquire about joining the Colorado Army National Guard please contact View phone number on click.appcast.io. 2. If you would like to inquire about joining the Colorado Air National Guard, please contact Recruiting Office Supervisor at View phone number on click.appcast.io. 3. PCS funds are not available (unless otherwise stated). 4. Be advised that if selected for a military technician position where membership in a reserve component is a condition of employment, your bonus may be terminated and may or may not be subject to recoupment. Questions pertaining to recoupment may be directed to the State Incentives manager at View phone number on click.appcast.io. 5. AGR positions are not announced/applied for on USAjobs. Contact your respective AGR offices for instructions on how to apply for AGR positions. 6. A security clearance may be required for this position. Please contact the selecting supervisor or state security manager with questions regarding clearances. (Failure to obtain/maintain a security clearance may be grounds for termination from the Technician program.) 7. Unless stated otherwise: Must be fully qualified or able to obtain AFSC within one year hire if this position is listed as immaterial against NGB compatibility requirements. If there is a compatible, required, or restricted AFSC listed in this announcement - you will need that AFSC to qualify for the position. If this position requires specific ASVAB scores, please contact the selecting supervisor with any questions. 8. This position may be contingent on the vacancy of the incumbent even if not otherwise stated in this announcement. Please contact the HRO with any questions regarding hiring dates. 9. Per ARNG-HRH Policy Memorandum #10-39, mandatory Full Time Staff (FTS) training is required within a year of hire as a condition of employment in vacancy announcements for both Technician and Active Guard Reserve positions. Failure of new FTS personnel to complete NGB prescribed courses at PEC within the first year of employment may be cause for reassignment to other full-time positions or termination of their employment. 10. Current COANG Technicians and AGRs hired for a position in which an MCR is required will remain in their current status unless/until the MCR is approved. In the event the MCR is not approved, they are accepting the position in their current status. 11. We use E-Verify to verify the identity and employment eligibility of all persons hired.