Assembler
Graham Corporation
Description
Job Title: Assembler
Reports To: Manufacturing Supervisor
Division/Department: Manufacturing
Level of Work: I
Position Summary:
Working with blue prints, assembly drawings, specifications, sketches, and verbal and written instructions, assembles, disassembles, repairs and adjusts a variety of units, attachments, components and/or accessories. Reports directly to Production Supervisor or his/her designate.
Key Results Areas by level of work
Level I: Quality - Complete and accurate work performed efficiently
Production quality and efficiency using appropriate tools and equipment, qualified to perform special processes as needed
- Working on assembly operations, sub assembly operations, attachments and/or accessories.
- Size of positioning of work may require incumbents of this position to operate a variety of material handling equipment including jibs, overhead cranes, and their accessories.
- Uses an assortment of measuring tools.
- Consistently meets customers quality requirements and expectations.
- Can properly read all blueprint and work instructions
- Will provide instruction and guidance to employees assigned to assist and as required, will participate in training of welders and other employees of the department of lesser classification.
- Performs other duties as assigned by the Production Supervisor, weld shop, or his/her designate.
- Work may require use of scaffold, ladders, forklift, and/or scissor lift.
- Work may require the use of a crane to move part.
- Maintains a clean work area with no clutter.
- Practices safety at all times while at work.
- Follows safety policies and procedures and speaks up when others are non-compliant.
- Wears all safety equipment for area of work.
- Keeps an open mind to others continuous improvement suggestions
- Bring continuous improvement suggestions to the appropriate team member.
- Demonstrates initiative, positive attitude, and enthusiasm for the job
- Will follow up with supervisor on professional development goals and opportunities
- Takes an interest and lets it be known that they have a desire to grow with the company
Qualifications:
To qualify for this position, an individual must possess the knowledge, training, experience and abilities required.
Education and Training
- Technical Trades School in Welding
- High school GED Required
- 1+ years of Assembly experience.
- Must be willing to work overtime as required.
- Minimal travel may be required
To perform the job successfully, an individual should demonstrate the following competencies:
1. Ability and willingness to abide by set policies and/or safety programs established by GHM, our clients, and/or regulatory agencies which govern our performance and behavior in the normal course of our work while on GHM or the clients property or job site.
2. Strong organization and time management skills.
3. High attention to detail.
4. Demonstrate behavior consistent with company values.
5. Ability to work independently, with minimal direction as a highly motivated self-starter and within a team oriented culture.
6. Exhibits polite and professional communication via phone, e-mail and mail.
7. Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan.
8. Maintain a collaborative relationship with internal and external stakeholders.
9. Obtains support and cooperation from others and reciprocates; demonstrates positive behaviors, displaying tact, respect, and understanding when dealing with others; proactively engages and confronts issues to achieve continual improvement.
10. Meets challenges with resourcefulness, generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets others attention.
11. Demonstrates pride in workmanship and commitment to continual quality improvement; maintains clean, organized work area; maintains accurate and timely labor reporting; makes improvement based on lessons learned; maintains strict adherence to quality system requirements.
12. Ability to add, subtract, multiply, divide in all units of measure, using whole numbers, common fractions, and decimals.
13. Ability to thrive in a team environment.
Physical and Mental Demands
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Physical demands: While performing the duties of this position, the incumbent is primarily required to sit, stand, walk, stoop, and bend. Required to speak and communicate clearly with others. Corrected vision to 20/20 or adequate and ability to identify and distinguish colors.
- Mental demands: While performing the duties of this position, the incumbent is required to read, write, analyze data and reports, exercise judgment, develop plans, procedures and goals, present information to others and work under pressure.
- Work Environment: While performing the duties of this position, the incumbent is also exposed to high level of manufacturing and equipment noise. Duties are performed indoors in a manufacturing environment with temperature changes. Exposure to hazardous materials, fumes or airborne particles and moving mechanical parts with vibration.
Must be able to work in the U.S without sponsorship.
$20 - $24 per hour
...Retirement benefits Employee engagement activities and company events Training and development opportunities Job Summary: Assembles a variety of products. Fits and/or assembles, adjusts and repairs subassemblies and major assemblies. Job complexity ranges from...SuggestedHourly payFull timeMonday to FridayShift workAfternoon shift- ...Description Job Title: Assembler Reports To: Manufacturing Supervisor Division/Department: Manufacturing Level of Work: I Position Summary: Working with blue prints, assembly drawings, specifications, sketches, and verbal and written instructions, assembles...Suggested
$20 - $36 per hour
...Description Job Title: Assembler Reports To: Manufacturing Supervisor Division/Department: Manufacturing Level of Work: I Position Summary: Working with blue prints, assembly drawings, specifications, sketches, and verbal and written instructions, assembles, disassembles...SuggestedTemporary work$20 - $25 per hour
...stability. Interested in joining our team? Apply today! J OB SUMMARY Under the direct supervision of the Engineering Manager, the Assembler is responsible for operating air guns, air drivers, hand tools, power tools, and the pallet jack ESSENTIAL FUNCTIONS...SuggestedHourly payPermanent employmentFlexible hours$20 per hour
ITG Communications is hiring for Cable Installer in Batavia, NY. Purpose: Responsible for performing skilled technical work, providing technical support for client organizations, performing installations and services for residential and commercial customers...SuggestedLocal area- ...Job Title Summary: Correctly assembles and tests pumps, systems, and related products to customer expectations using hand tools, testers, work instructions, and Bill of Materials while working in a team environment. Essential Responsibilities: Performs bench...Day shift
$19 - $25 per hour
...available Monday-Friday Weld components together according to blueprints and job traveler Check and verify part numbers prior to assembly of product to customer specifications Accurately measure and lay out locations for welded components Adjust weld as needed...Hourly payFull timeMonday to FridayShift work- Description Job Title: Mechanized Robotic Welder Reports To: Manufacturing Supervisor Division/Department: Manufacturing Level of Work: I Position Summary: We are seeking a skilled Orbital/Mechanized/Robotic Welder to support our manufacturing...
- ...Job Description Job Description We are currently hiring experienced Heavy Equipment Assemblers for our 1st and 2nd shifts. Responsibilities Perform mechanical, electrical and hydraulic assemblies, working from blue prints, electrical and hydraulic drawing...Currently hiringLocal areaWorldwideShift workDay shiftAfternoon shift
- Job Title: Electronics Tech/Electrician (ET/FC) Category / Component: Enlisted • Active Overview The Advanced Electronics and Computer Field trains Sailors to maintain, operate, and repair some of the Navy’s most sophisticated electronics and computing systems, including...ApprenticeshipLocal areaRotating shift
- Field Technician At Spectrum Self-motivated. Resourceful. Problem solver. Sounds like you? If so, a career as a Field Technician at Spectrum may be right for you. If you're looking for a hands-on career that involves both independent and team-based work, this customer...Full time
$20 - $33 per hour
Commercial RooferWe are seeking experienced Commercial Roofers to join our team. The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.Benefits:401KHealth InsurancePaid time-offMileage reimbursementContinuing...Hourly pay$27 - $35 per hour
Job Description Job Description We're looking for Autobody Preppers with a minimum of 5 years of professional automotive bodywork experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies...Hourly pay$30.69 - $40.26 per hour
...Additional supplemental offerings and discount programs Employee Referral Program Responsibilities Removes, disassembles, assembles, and installs components and parts. Identify the problem and cause of failure through logical troubleshooting steps....Hourly payMinimum wageFor contractorsFlexible hours$33 - $38 per hour
Expert Field Service Technician Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150...- Job Description Job Description Key Responsibilities: Respond to roadside and on-site service calls using a fully equipped service truck. Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial...Flexible hoursAfternoon shift
$23 - $30 per hour
Job Description Job Description We're looking for Auto Painters with a minimum of 3 years of professional automotive painting experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to ...Hourly payAfternoon shift$40k - $75k
Job Description Job Description Why LandPro Equipment? We’re proud to be a trusted John Deere dealer serving communities across New York, Ohio, and Pennsylvania but what sets us apart is how we show up every day. Our goal is simple, to be the most respected...Temporary workTraineeshipLocal area$19 - $22 per hour
Job Description Job Description We're looking for State Inspectors with 1+ years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune...Hourly payMonday to Friday- ...complex weldments. Our welders are problem solvers and craftsmen utilizing engineering drawings and specifications to fabricate assemblies both with and without fixtures. If you enjoy variety, take pride in producing high quality products, and want to work in a modern...Local areaWorldwideShift workDay shiftAfternoon shift
- Note : This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the healthcare job market. Looking to start a rewarding career path in the healthcare industry? Use Dreambound...Flexible hours
$22 per hour
...leather repair, refinishing, color matching, and part installation. Assist with warehouse tasks: unloading trucks, prepping/staging/assembling products, loading deliveries/pickups, processing recycling, and keeping the area organized. Operate tools, dollies, pallet...Hourly payDay shift$45k - $120k
LandPro Equipment Agricultural Technician We're proud to be a trusted John Deere dealer serving communities across New York, Ohio, and Pennsylvania but what sets us apart is how we show up every day. Our goal is simple, to be the most respected dealership by living ...Temporary workLocal area$18.4 - $22.5 per hour
Core Technician Part Time Location: UMMC- Batavia Department: Surgery Schedule: Day/Evening, 7-3pm, 8-4pm, 9-5pm Summary A multi-skilled role for maintaining and facilitating the flow of surgical supplies, instrumentation throughout the sterile core. ...Hourly payPart timeLocal areaAfternoon shift$20 - $31 per hour
Job Description Job Description Pay Range: $20.00 - $31.00 hourly Sign-On Bonus of up to $8,000 based on level of experience Schedule: Monday through Thursday (4 day work week) Hours: 4:00pm to 2:30am We're looking for automotive mechanics with a minimum...Hourly payRelocation packageMonday to FridayMonday to ThursdayAfternoon shift- Job Title: Medical Assistant/Technician (Hospital Corpsman) Category / Component: Enlisted • Both Overview Hospital Corpsmen assist healthcare professionals and provide medical and dental care to Sailors, Marines, and their families across clinics, hospitals, ships, and...ApprenticeshipShift work
- ...operation that involves the construction, installation, repair, and moving of plant property, equipment, and machinery. Installs, assembles, maintains, and dismantles a wide variety of machine tools and equipment. Must be able to diagnose trouble and repair machine...For contractorsWork experience placementWork at officeFlexible hours
- Maintenance Technician Job Summary: We are seeking a skilled and detail-oriented Maintenance Technician to join our premier team at Premier Genesee, a 160-bed facility located in Batavia, New York. As a key member of our facilities team, you will be responsible for ensuring...
$35 - $40 per hour
The Batavia Power Plant is a 62 MW natural gas-fired facility configured as an efficient 1+1 combined cycle cogeneration block, supplying both electricity and thermal energy. Located between Buffalo and Rochester along the I-90 corridor, it benefits from strong access ...Hourly payLocal areaMonday to FridayFlexible hoursWeekend workDay shift$25 - $33 per hour
...micrometers, calipers, metal gauges, metal thickness) Knowledge of oxygen acetylene equipment and welding equipment Ability to assemble, disassemble, and overhaul hydraulic pumps, relief valves, regulating valves, filters, lines, actuating cylinders, and motors...RelocationShift workNight shiftDay shiftAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembler. Be the first to apply!



