Maintenance Mechanic III
Shannon Health
Job Summary Under minimal supervision, performs as well as maintains moderately complex preventative and corrective building systems. This includes but is not limited to mechanical equipment repair and maintenance, refrigeration equipment maintenance, industrial equipment maintenance & operation, general knowledge of electrical and mechanical system operation. Understands general building construction. Supervises the Following Positions Positions: Trains and guides Mechanic I & II Physical Requirements
Performance: Essential Functions Decision Making: Ability to make decisions and takes appropriate action based on the information they have. Recognizes own limitations and consults with the supervisor, manager, or team member when appropriate. Time Management: Works efficiently and manages duties to ensure that tasks are completed with accuracy and within the scheduled shift or reasonable amount of time. Quality & Quantity: Demonstrates accurate, knowledge and skill to carry out job duties. Follows departmental work policies and procedures. Speed and consistency of output, and time utilization of job duties. Computer Knowledge & Electronic Equipment Use: Demonstrates ability to consistently utilize electronic equipment and online computer programs to perform job duties, including electronic documentation, and order entry. Resource Utilization: Consistently utilizes and maintains supplies and equipment to minimize lost charges and unnecessary equipment repair-replacement. Confidentiality: Adheres to established policies on privacy and security requirements for compliance with the Health Insurance Portability and Accountability Act (HIPAA), as applicable by Shannon Policy. Performance: Position Specific Essential Functions
- The ability to perform the duties and responsibility of the position, with or without reasonable accommodations for disabilities.
- The ability to consistently lift, push or pull loads of up to fifty (50) pounds. (Unless nursing 50)
- Sufficient strength, mobility and stamina to make frequent location and position changes, assist with patient care, and perform other physical activities of average difficulty.
- Candidates whose disabilities make them unable to meet the requirements will still be considered fully qualified if they can perform the essential functions of the job with reasonable accommodations.
- May be exposed to infectious or contagious disease.
- May have to handle emergency situations.
- May be subject to irregular hours.
- May be required to wear protective equipment such as eye protection, face protection, masks, sterile/nonsterile gloves, isolation gowns.
- May be exposed to toxic/caustic/chemicals/detergents.
- Physical activities include continuous sitting, and occasional walking, standing, bending, squatting, climbing, kneeling and twisting.
- Activity Conditions (Occasionally, Frequently, Continuously):
- Sitting- Occasionally
- Walking- Frequently
- Standing- Frequently
- Bending-Frequently
- Squatting- Occasionally
- Climbing-Occasionally
- Kneeling-Occasionally
- Twisting-Occasionally
- Must be able to see with corrective eye wear.
- Must be able to hear clearly with assistance
Performance: Essential Functions Decision Making: Ability to make decisions and takes appropriate action based on the information they have. Recognizes own limitations and consults with the supervisor, manager, or team member when appropriate. Time Management: Works efficiently and manages duties to ensure that tasks are completed with accuracy and within the scheduled shift or reasonable amount of time. Quality & Quantity: Demonstrates accurate, knowledge and skill to carry out job duties. Follows departmental work policies and procedures. Speed and consistency of output, and time utilization of job duties. Computer Knowledge & Electronic Equipment Use: Demonstrates ability to consistently utilize electronic equipment and online computer programs to perform job duties, including electronic documentation, and order entry. Resource Utilization: Consistently utilizes and maintains supplies and equipment to minimize lost charges and unnecessary equipment repair-replacement. Confidentiality: Adheres to established policies on privacy and security requirements for compliance with the Health Insurance Portability and Accountability Act (HIPAA), as applicable by Shannon Policy. Performance: Position Specific Essential Functions
- Performs preventive and corrective maintenance work of average difficulty including painting, electrical, refrigeration, plumbing, HVAC, and furniture repair.
- Troubleshoots and repairs moderate equipment malfunctions in three of the following six areas: plants operations, refrigeration's systems, electrical systems, plumbing systems, HVAC system, and building maintenance.
- Increases technical and personal skills through formal maintenance shop training, team training, one on one sessions, off site technical trainings, self-study programs and other staff education as appropriate.
- Accurately and neatly prepares and maintains department records and files; prepares reports as assigned.
- Communicates in a positive and service orientated manner; works effectively with others; encourages teamwork and good customer relations.
- Participates in team activities such as planning, goal setting and coordination of assignments.
- Adheres to hospital, departmental, safety, infection control and other appropriate policies.
- Performs other duties as assigned.
- Preferred
- High School Diploma, GED, or equivalent
- Completion of Vocational School in a maintenance related field
- Required
- Five years of experience in Building Maintenance, Plant Operation, Construction, or related
- Five years of Technical Education related to maintenance
- Required
- Valid State Issued Driver's License
- Preferred
- Electrical, Plumbing, Air Conditioning License
Vacancy posted 1 day ago
Similar jobs that could be interesting for youBased on the Maintenance Mechanic III in Big Spring, TX vacancy
- ...Job Summary Under general supervision, Maintenance Tech III repairs and maintains the fiber and coaxial transport and distribution cable services including residential and business video, data, telephone, and security. As needed supports repair and maintenance of...SuggestedNight shift
- ...specializing in repair, engineering, and maintenance solutions for the wind energy industry.... ...millimeters. Ability to read and interpret mechanical drawings, blueprints, dimensions, and... ...large industrial components is preferred. III. Personal Competences: Strong attention...SuggestedFull timeWork at office
- ...Maintenance TechJob Title: HVAC & General Maintenance TechnicianWe are seeking a skilled and proactive HVAC & General Maintenance Technician... ...will have experience in HVAC systems, electrical and mechanical maintenance, and general facility repairs, with a strong focus...SuggestedLocal areaWeekend workAfternoon shift
$33 - $35.5 per hour
...inverters in the field, and performs warranty repairs across assigned sites in the Central region. The role also covers operation and maintenance activity, performance data analysis, and building working knowledge of utility inverter applications. PRIMARY DUTIES /...SuggestedHourly payFull timeTemporary workH1bWork at officeHome office$22.5 per hour
Early Career Program: Field Engineering Do you like working in collaborative teams and solving technical problems? Would you like to work in the field with our customers? Join our team of Field Engineers Our Early Career Program for Field Engineers inspires...SuggestedHourly payPermanent employmentTemporary workWorldwide$20 per hour
Southern Star Technician Opportunity Training/Base pay rate of $20.00 per hour. The base rate increases by.50 upon completion of training. We have a guaranteed hourly rate of $25.00 per hour upon completion of training through your first 9 months. This allows time to...Base plus commissionHourly payDaily paid2 days per week- ...Employee could be faced with working in temperature extremes. Employee must be able to lift and carry 50 pounds, manual dexterity and mechanical aptitude helpful. Use of safety equipment to include, but not limited to: hardhat, safety glasses, hearing protection, work boots...Work at office
- Maintenance And Repair Requirements The incumbent is responsible for general maintenance and repair requirements as established by the Chief, Environmental Management Service. Incumbent will operate a motor vehicle, forklift, and utility vehicle.
- ...kneel, twist, and grip items while working at area. Must have the manual dexterity and coordination to operate hand tools and mechanical tools such as a wench. Must be able to work at a fast pace. Must be able to tolerate changing priorities, and complete assignments...
- ...Maintenance WorkerThis is a key position within Environmental Management Service operational framework; requiring a high degree of initiative, accuracy, and the ability to work independently. Carpentry Duties The Incumbent executes a full range of maintenance activities...RelocationMonday to Friday
- ...The incumbent is responsible for general maintenance and repair requirements as established by the Chief, Environmental Management Service . Incumbent will operate a motor vehicle, forklift, and utility vehicle. Major Duties This is a key position within Environmental...Full timePart timeFor contractorsTraineeshipSeasonal workRemote workWork from homeRelocationMonday to Friday
$35.99k
...Full-Time Job Number: 2025-00147 Department: Building Maintenance Division: Public Works Opening Date: 04/09/2026... ...employees and the public. Skill in operating power tools and mechanical equipment effectively and safely. Skill in reading and understanding...Bi-weekly payPermanent employmentFull timeImmediate startMonday to FridayFlexible hoursWeekend work- ...quality standards throughout the production process by performing detailed inspections, precise dimensional measurements of large mechanical components, production monitoring, and quality reporting. The successful candidate demonstrates exceptional attention to...Immediate start
- ...done right. You'll work across new construction and service work - handling residential and commercial installations, repairs, and maintenance, with no two days quite the same. You'll follow code every time, work safely, and represent a company built on trust over 30+...Local areaFlexible hours
- ...Family-owned and operated culture ~ Growth and advancement opportunities Responsibilities Perform advanced mechanical repairs and maintenance on a wide range of vehicles Diagnose complex mechanical and electrical issues using manufacturer-approved tools...Flexible hours
- Quality TechnicianSeeking a Quality Technician for a well-established company!Job duties include:Ensure quality and analyze component measurementsMake quality reports and document deficienciesCommunicate identified defects to supervisorsMonitor production phaseEnsure raw...
- Seeking a Quality Technician for a well-established company! Job duties include: Ensure quality and analyze component measurements Make quality reports and document deficiencies Communicate identified defects to supervisors Monitor production...
- ...BENEFITS: Company Vehicle, Per Diem, and Lodging Provided CONTEXT: Seeking a skilled Concrete Plant & Fleet Mechanic to oversee the maintenance, troubleshooting, and repair of mobile concrete batch plants and ready-mix truck fleets across West Texas. This role...Daily paidFull timeRelocation
- ...Occasionally lift heavy objects. About You We Require: A high school diploma or GED. A minimum of 1-year of industrial, mechanical, or manufacturing experience. Good organizational, verbal, and written communication skills. Must be willing to travel...Night shiftWeekend work
$70 per hour
Job Description Job Description Do you want to work at one of the busiest automotive dealerships in the region where your employer treats you like a member of the family? Due to tremendous growth Star Chrysler Dodge Jeep Ram and Ford Big Spring has immediate openings...Immediate startRelocation package- ...transportation and movement of natural gas and liquid NGL products. The Pipeline Technician must balance a high level of surveillance and maintenance to maintain the integrity of the pipeline system(s). The Technician will be expected to take a proactive approach in mitigating...For contractorsWork at officeLocal areaShift workWeekend work
- ...transportation and movement of natural gas and liquid NGL products. The Pipeline Technician must balance a high level of surveillance and maintenance to maintain the integrity of the pipeline system(s). The Technician will be expected to take a proactive approach in mitigating...For contractorsWork experience placementWork at officeLocal areaShift workWeekend work
$90.5k
...imagination in an atmosphere where people are free to perform to their fullest potential in an open and friendly environment. Mechanical Technician, Mechanical Specialist, Carpenter, Electrician, Electrical Technician, Hands-on Mechanic, Field Support, Operator #INDUS...Work at officeRemote workWorldwide$20 - $22 per hour
...calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes... ...to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites...Daily paidFlexible hours- Responsibilities for safety technician: Calibrate and maintain gas monitors used in the safety department Participate in emergency response activities Examine the work area to assure that all required work has been completed and is in compliance with the contract...Daily paidContract workWork at officeAll shiftsWeekend work
- ...Ensure all work is completed safely and in compliance with company procedures, permits, regulations, and standards. Support maintenance activities through the company Maintenance Program. Review and provide input on control specifications, work practices, and technical...
- Note : This is an educational program, not a job. Successful completion of the program does not guarantee employment but will equip you with valuable skills for the healthcare job market. Looking to start a rewarding career path in the healthcare industry? Use Dreambound...Flexible hours
- Job Summary Responsible for performing phlebotomy procedures (blood draws) in the laboratory and in the hospital. Performance: Position Specific Essential Functions Maintains blood drawing trays and keeps them properly stocked; Keeps drawing room neat and...
- Job Description Job Description Service Technician – Automotive We run an honest shop and need honest, hard-working techs. To be a success at our dealership, you need to have solid skills and solid ethics. We also know that to keep a good service tech, a dealership...TraineeshipLocal area
$100k - $160k
...experience with AUDI vehicles Strong specialization and experience with AUDI vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude...Hourly payRelocationRelocation package
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Maintenance Mechanic III. Be the first to apply!
Related searches
- hospital maintenance technician Big Spring, TX
- data center maintenance technician Big Spring, TX
- maintenance technician Big Spring, TX
- pool repair technician Big Spring, TX
- repair technician Big Spring, TX
- hospital maintenance mechanic Big Spring, TX
- maintenance mechanic Big Spring, TX
- maintainer Big Spring, TX
- hotel maintenance technician Big Spring, TX
- trabajo mantenimiento Big Spring, TX



