BAS Controls Systems Installer I-III
$24 - $40 per hourMPSW
BAS Controls Systems Installer I-III
Tucson, AZ
For over 45 years, MPSW has been a trusted source for engineered HVAC solutions in Arizona. We represent top-tier manufacturers and provide technical sales support for nearly every system type—backed by expert design assistance, energy analysis, and application know-how.
At MPSW, we're team-driven, service-focused, and always moving forward. If you're a self-starter who values collaboration and wants your work to make a real impact, you'll fit right in here.
BAS Controls Systems Installer I-III
Reports to: Controls Area Construction Manager
FLSA Status: Non-Exempt
Pay Range: $24-$40 per hour
The Opportunity
The Controls Systems Installer Level I - must have basic construction site experience, be willing to work in unfinished buildings with basic hand tools and possesses a valid driver's license. Level II - requires all of Level I requirements as well as a starting base knowledge of controls, mechanical and electrical systems. Level III - possesses all of Level I and II requirements and has the skills and knowledge of how to install controllers, components, and systems with minor support. All Levels must have good communication skills, be self-motivated and eager to learn.
Responsibilities:
- Pulls and secures wire between controllers and devices
- Mounts control devices such as temperature sensors and actuators
- Mounts panels and panel components
- Terminates wire at controllers and control devices
- Performs simple conduit work such as straight conduit stub-ups through ceiling grid from a panel or conduit stubs through a wall
- Able to explain basic low-voltage wiring principles
- Uses a meter for simple troubleshooting and can understand simple wiring diagrams
- Works independently on assigned tasks and reports back to Supervisor or Peers on issues that prevented work from being completed
- Jobsite cleanup
- Completes documentation including timesheets and project notes
Level Descriptions
- Level I – Candidate requires supervision and support to perform tasks. Primarily helps with pulling wire, installing field devices, and maintaining a safe and clean work environment.
- Level II – Candidate requires some support with moderate level tasks such as mounting controllers and terminating wires on controllers and field devices. Can install control wiring and some field devices without consistent support.
- Level III – Candidate requires less support on basic installation tasks and possesses a basic knowledge of control systems. Can install and terminate controls on unitary equipment with little support and can troubleshoot installation on basic controls circuitry.
Qualifications:
- High School Diploma or equivalent
- 0-3 years of experience working in construction, controls, HVAC, or similar industry preferred
- Ability to understand and comply to jobsite and company safety requirements
- Demonstrates a positive attitude and a desire to learn
- Ability to take direction for specific tasks
- Demonstrates mechanical aptitude and basic hand tool skills
- Good verbal and written skills
- Must have a Valid driver's license, acceptable driving record and be 25 years of age for insurance purposes
- Basic computer skills required (Outlook, Word, Excel)
Other Skills/Abilities
Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mental stamina for problem solving and prioritizing multiple tasks.
Environmental Requirements
Will be required to work in a field environment, multiple customer sites on a daily basis.
Physical Demands
While performing the duties of this job, the employee is regularly required to use hands to operate computer keyboard reach with hands and arms. The employee frequently is required to stand, walk, and sit. The employee is continually required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, frequently lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.
NOTE: This job description is not intended to be all-inclusive. Employee may perform other related duties as negotiated to meet the ongoing needs of the organization.
MPSW is an Equal Opportunity Employer
Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Reasonable accommodations will be made for qualified individuals with disabilities unless doing so would result in an undue hardship.
Salary ranges listed are dependent upon a candidate's qualifications, experience, internal equity, and the budgeted amount for the specific role and location.
$38 - $54 per hour
...manufacturers and provide technical sales support for nearly every system type—backed by expert design assistance, energy analysis,... ...work to make a real impact, you'll fit right in here. BAS Controls Systems Installer IV-V Reports to: Controls Area Construction Manager...SuggestedHourly payFor contractors- ...electronic, mechanical, hydraulic, and pneumatic systems and components. Position Responsibilities... ...and test equipment. Repair Technician III will be experienced in the use of test... ...of quality assurance, safety, biohazard control and cleanliness. Support Machine Solution...Suggested
- ...electronic, mechanical, hydraulic, and pneumatic systems and components. **Position... ...tools and test equipment.· Repair Technician III will be experienced in the use of test equipment... ...of quality assurance, safety, biohazard control and cleanliness.· Support Machine...SuggestedFull time
$28 - $39 per hour
...Join The Johnson Controls TeamAs a global leader in smart, healthy and sustainable buildings, our mission... ...supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems)....SuggestedHourly payContract workFor contractorsFor subcontractorImmediate startWorldwide- CAREERS Controls Service Tech - Tucson Purpose of the Position As part of the Varitec Controls and Service Solutions LLC team, expectations... ..., and preventive maintenance on building automation control systems while providing top-tier customer service for all internal and...SuggestedFor subcontractorLocal areaNight shift
- ...Aviation Electronics, Electrical & Computer Systems Technician (AE/AT) Category /... ...radar, communications, navigation, flight controls, and weapons at sea and ashore. Qualified... ...card repair for qualified technicians; install modifications and upgrades to aircraft avionics...Temporary workApprenticeshipWork at officeWorldwideNight shiftRotating shift
$24 - $38 per hour
...their operation, providing faster systems repairs and delivering... ...field. Senior Level (Level III) - possesses experience in basic... ...troubleshoot, service, inspect, install, and repair industrial... ...aware that we do not endorse or control the content on these external...Hourly payFull timeApprenticeshipFlexible hoursNight shiftWeekend work- ...position supports Department of State Worldwide Protective Services III (WPS III) Task Orders (TO) in austere environments.... ...Service Excellence (ASE)/factory certification for assigned equipment/systems. At a minimum must possess three (3) of the certifications listed...WorldwideOverseasLong distance
$28 - $38 per hour
...SIGN ON BONUS OR RELOCATION AVAILABLE FOR QUALIFIED CANDIDATES About us Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions...Hourly payLocal areaRelocationRelocation package$20.9 - $54.32 per hour
...hydraulics, electrical, powertrain, engines, and Tier IV Emissions systems, failure analysis procedures, warranty claims procedures...... ...equipment and components. Prepare service reports. Plan and control cost of repair jobs. Maintain company equipment - keep in...Hourly payWork experience placementRemote workShift workNight shiftDay shift- ...hydraulics, electrical, powertrain, engines, and Tier IV Emissions systems, failure analysis procedures, warranty claims procedures…If... ...maintain equipment and components.Prepare service reports.Plan and control cost of repair jobs.Maintain company equipment – keep in good...Work experience placementRemote workNight shift
- ...inspections, diagnostics, maintenance, and repairs on automotive systems, including engine, transmission, brakes, steering, suspension,... ...according to manufacturer guidelines. Conduct quality control inspections and road tests as needed. Maintain productivity,...
$16.5 - $22 per hour
...Responsibilities Diagnose, troubleshoot, repair, install, and maintain printers, wide-format printers, plotters, kiosks, POS systems, computers, peripherals, and other IT... ...requirements Coordinate with Level II, Level III, Lead Technicians, project teams, and remote...Hourly payLocal areaRemote workNight shift- ...Staffing is seeking a skilled and dependable Installation Service Technician with experience in... ...and industrial equipment and building systems. The ideal candidate is mechanically inclined... ..., including wiring, motors, switches, control panels, and lighting. Diagnose...Local area
- ...skill when troubleshooting, repairing and installing parts, as needed to maintain the... ...mechanical, hydraulic, electrical and pneumatic systems either by phone or on site *... ...of relevant experience * Expert at Rig Control Systems (RCS) * Will need to complete...Contract workWork experience placementRemote workShift workDay shift
$27.88 - $35.1 per hour
...technology, deploying Autonomous Haulage Systems (AHS) that automate operations in mines,... ...profitable AV technology company. Installation & Deployment Perform on-site installation... ...systems, heavy equipment, machine control, robotics, or complex sensor integrations...Hourly payFull timeWork at officeRemote workWorldwideFlexible hours$23 - $31 per hour
SIGN ON BONUS OR RELOCATION AVAILABLE FOR QUALIFIED CANDIDATES About us Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions...Hourly payLocal areaRelocationRelocation package- ...Job title: TECHNICIAN QUALITY CONTROL Date: Aug 28, 2026 Location: TUCSON, AZ, US, 85743 Job Requisition... ...around large mobile equipment and automatic conveyor belt systems. Must be able to pass a physical exam to include back x-ray,...Local areaRemote workShift workNight shiftWeekend workEarly shift
- ...Electrical and mechanical troubleshooting Pumps, motors, heaters, and control systems Plumbing and leak repair Water chemistry Hot tub and swim spa maintenance Deliveries and installations Proper use of tools and diagnostic equipment How to diagnose...Hourly payFull timeApprenticeship
$30 per hour
..., and removal of parts and attachments. Installation with the help of proper manuals, report... ...documented as assigned. Manage inventory control on the service truck and for keeping the... ...functions on the company computer system. Examine protective guards, loose bolts...$34.38 per hour
...Responsibilities Perform fabrication, assembly, installation, diagnosis, repair, and modification on... ..., refrigeration, vacuum, and gas systems associated with test equipment. Conduct... ...fabrication procedures. Handle shop floor control system, document equipment scheduling...Temporary workFlexible hoursShift workNight shift$34.38 per hour
...Do: Performs fabrication, assembly, installation, diagnosis, repair and modification on hydraulic... ..., refrigeration, vacuum, and gas systems associated with test equipment. Performs... ...such as operating the shop floor control system, documenting equipment scheduling...Temporary workWork at officeRemote workFlexible hoursShift workNight shift$52k - $72.8k
...through difficult problems. This person installs, maintains & repairs fuel dispensers; submersible... ...fuel pumps; service station site controllers; credit card readers; cash register... ...electronics, computers, and the fuel dispensing systems, including electronic, plumbing and...Full timeRelocation package$27.88 - $35.1 per hour
...technology, deploying Autonomous Haulage Systems (AHS) that automate operations in mines,... ...is a hands-on role responsible for the installation, preventive maintenance, and repair of Pronto... ...technician, avionics, industrial controls, or military/vehicle maintenance technician...Hourly payShorter hoursFull timeFor contractorsWorldwideFlexible hoursShift workNight shift- ...work ethic and strong mechanical aptitude-including experience with industrial/commercial fluid power and low voltage electrical control systems Possess own hand tools and can expand on personal tool inventory by purchasing additional tools referencing the required tool...Contract workTemporary workWork experience placementFlexible hoursShift work
- ...carbon monoxide detection, networking, hosted video solutions, and access control. Follow and complete required processes of wired/wireless technology and connection procedures. Test and validate system signals/communication with central monitoring to properly establish...Casual work
- ...with motors, switchgear, transformers, controls, variable frequency drives, protective relays... ...US will be essential. Electrical installation, including but not limited to conduit, cable... ...all types of electrical and electronic systems, both indoors and outdoors. Working...For contractors
- ...and most efficient in the state. Technicians enjoy the climate controlled shop, with new in ground lifts, built in tool boxes, and the... ...and procedures Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment Diagnosing...Temporary workLocal area
- ...courtesy inspections and document findings Test and install batteriesDiagnose and perform brake jobs (disc/drum,... ...work) Handle suspension repairs (struts, shocks, control arms) Perform alignments and steering system repairs Replace under-hood components (water pumps,...Hourly payFlexible hoursWeekend work
- ...Sargent has an immediate opening for a CNC Maintenance Technician III . Purpose and Scope This position provides basic... ...maintenance activities in CMMS (Computerized Maintenance Management System). Ensure proper spare parts needed for PM’s are maintained,...Immediate startFlexible hoursShift work3 days per week
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to BAS Controls Systems Installer I-III. Be the first to apply!


