Assembly Process Engineering Manager
Micro-Coax, an Amphenol Company
Job Description
Job Description
SUMMARY
The Assembly Process Engineering Manager leads a team of engineers and technicians in the development, optimization, and validation of manufacturing processes for cable assemblies, harnesses, and RF connectors, ensuring they meet safety, quality, cost, and delivery targets while supporting product development and production readiness.
ESSENTIAL JOB FUNCTIONS
- \t
- Leads a team of engineers and technicians to develop new processes, support problem-solving and continuous improvement initiatives, and achieve operational objectives. \t
- Provides technical leadership to Assembly value streams to ensure production and quality issues are resolved in a timely manner. \t
- Leads the team in researching, developing, and implementing improvements related to cable preparation, soldering, assembly processes, de-golding, and RF and mechanical testing. \t
- Drives continuous improvement efforts through Lean and Six Sigma methodologies to reduce scrap and improve efficiency. \t
- Partners with Design, Product, and Advanced Manufacturing Engineering to industrialize new products and processes. \t
- Leads CAPEX projects from proposal through installation and qualification (DQ/IQ/OQ/PQ). \t
- Performs other duties as required to support the department and the company.
SUPERVISOR RESPONSIBILITIES
This role has supervisory responsibility for a technical team of approximately 6-10 direct reports. Supervisory responsibilities are carried out in accordance with the organization's policies and applicable laws. These responsibilities include interviewing, hiring, developing, and training employees; planning, assigning, and directing work; appraising performance; recognizing employee contributions; addressing performance and conduct concerns; and resolving complaints and problems.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION AND EXPERIENCE
- \t
- Bachelor's degree (B.S.) in Engineering from an accredited four-year college or university. \t
- Master's degree in Engineering, Engineering Management, or a related field preferred. \t
- Demonstrated experience with Lean and Six Sigma manufacturing methods and structured problem-solving approaches. \t
- Previous experience developing, managing, and improving manufacturing processes.
LANGUAGE REQUIREMENTS
- \t
- Excellent verbal and written communication skills in English.
JOB SKILLS
- \t
- Excellent project management and organizational skills. \t
- Demonstrated people leadership skills, with the ability to lead a technical team of approximately 6-10 direct reports and manage the execution, performance, and development of technical staff. \t
- Understanding and demonstrated application of engineering concepts and tools, including risk mitigation, Six Sigma, and Lean. \t
- Technical writing experience preferred. \t
- Ability to adapt quickly to changes driven by organizational strategy, continuous improvement initiatives, or customer needs. \t
- Ability to explain complex operations and methods clearly and concisely to employees, suppliers, and customers. \t
- Knowledge of structured problem-solving methodologies, including root cause analysis (RCA), Plan-Do-Check-Act (PDCA), and 8D. \t
- Ability to lead, participate in, and advise cross-functional project teams. \t
- Ability to collaborate effectively with others and consistently treat all individuals with respect. \t
- Ability to demonstrate accountability and accept responsibility for individual actions and outcomes. \t
- Willingness to accept feedback from others. \t
- Ability to work extended hours, including weekdays and weekends, as business needs require.
PHYSICAL DEMANDS
As part of their job duties, the employee must be able to sit, stand, and walk throughout the day while frequently using their hands to handle objects and communicate verbally. Additionally, they may need to reach, stretch, push, pull, crouch, and stoop. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. This role requires specific vision abilities, including close, distance, color, peripheral vision, depth perception, and the ability to adjust focus. According to ADA regulations, reasonable accommodation will be provided to ensure that individuals with disabilities can perform the job's essential functions.
WORK ENVIRONMENT
A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement.
PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS
- \t
- ASTM F–2412–2005, ANSI Z41–1999, or ANSI Z41–1991 rated safety toe shoes in specific areas. \t
- Clear ANSI Z87.1 safety-rated glasses in specific areas.
EXPORT COMPLIANCE DISCLAIMER
This position includes access or potential access to ITAR and EAR (Export Administration Regulations) technical data. Therefore, candidates must qualify as US Persons, defined as US Citizens or Permanent Residents (Green Card Holders).
TRAVEL
Travel of less than 10% is expected.
- ...Design Engineer Van Cleef Engineering Associates, LLC (Van Cleef) is a dynamic, multi‐disciplined consulting civil engineering firm... ...Plans. Must have a fundamental knowledge of stormwater management and E&S design. Prepare Subdivision and Land Development Plan...SuggestedWork at officeLocal areaVisa sponsorshipFlexible hours
$170.54k - $194.9k
...STV is currently searching for a Senior Mechanical Engineer to join our Buildings Division out of our Douglassville, PA Office. This individual... ...project interviews, contribute to proposal language, and assemble man-hour estimates and associated fees. QUALIFICATIONS: •...SuggestedContract workFor contractorsFlexible hours$92.7k - $114k
...and sick days; and much more. ***This Engineering role can be filled at the Mid-level or... ...development and implementation of effective processes and techniques at appropriate levels of... ...assignments and duties as directed by management or pursuant to company policy,...Suggested$20 - $26 per hour
...- - Responsibilities: Test parts and products using gauges and network analyzers; Review production paperwork and quality; Perform rework and soldering; Troubleshoot production issues and implement corrective actions; Build and test engineering samples and prototypesSuggested- ...and improving manufacturing processes. The Manufacturing Technician... ...they are assigned (Cable, Assembly, Plating, Extrusion, Tube Drawing... ...actions.Build and tests engineering samples and prototypes.Participate... ...comprehensive Environmental Management System that provides the...SuggestedPermanent employment
$135.7k - $251.9k
...DescriptionIntroductionWe are looking for a creative Circuit Design Electrical Engineer to join an exciting and dynamic team in developing complex... ...the ability to articulate complex technical issues to peers, management, subcontractors and customers.• Demonstrated strong problem...Full timeTemporary workWork experience placementFor subcontractorCasual workFlexible hours$20 - $26 per hour
...Responsibilities Work in a cell with assemblers and solderers on the production floor.... ...Set up and operate complex or precision processes as assigned. Test products using... ...corrective actions. Build and test engineering samples and prototypes. Essential Skills...Weekly payContract workTemporary workMonday to FridayDay shiftAfternoon shift$84.2k - $112.2k
...like to be a part of, we’d love to hear from you. A World of Difference. Made Possible.JOB SUMMARY: The Process Engineer provides engineering and project management support to maximize efficiency of production operations. They also provide project management, active...Full timeTemporary workLocal areaWorldwideFlexible hoursNight shiftWeekend workDay shift$100k - $120k
...Senior Manufacturing Engineer Gilbertsville, PA | $100,000 to $... ...production, machining, fabrication, assembly, purchasing, scheduling,... ...and shop-floor execution. Manage production scheduling,... ...programming, tooling, fixtures, and process standards. Implement Lean...Permanent employmentFull time- ...Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation,... ...Jersey & Pennsylvania, with the opportunity to grow into a Project Manager over time if that is a priority for the selected candidate....Currently hiringWork at officeImmediate start
- ...Job Description Job Description SUMMARY The Process Engineer supports, monitors, troubleshoots, and improves manufacturing processes and products, with a primary focus on plating and associated processes. This role is also responsible for supporting process and...Permanent employmentCasual workInternshipWork at office
- ...Description SUMMARY The Product Engineer performs engineering... ...the quote and order release processes for customized made to print... ...Master's degree in Engineering management, Systems Engineering or MBA... ..., specifically cable, cable assemblies, connectors and harnesses \t...Permanent employmentContract workCasual work
$100k
...Job Description Job Description Job Title: Manufacturing Process Engineer Job Description \n The Manufacturing Process Engineer will serve... ...and technician support. \n Focus on RF coaxial cable assembly, with potential exposure to plating and bulk cable manufacturing...Permanent employmentFull timeMonday to FridayShift workAfternoon shift- ...shift. SUMMARY The Manufacturing Process Engineer – 2nd Shift is the primary technical... ...technicians and 2nd shift production management to resolve issues, maximize... ...production. The role is focused primarily on assembly operations and will also support other...Permanent employmentWork at officeMonday to FridayShift workDay shiftAfternoon shift
- ...50 pounds and occasionally up to 80 pounds. Must be able to closely inspect and continually monitor all machines in the production process. While performing the duties of this job, the employee is regularly required to move throughout the facility. The employee is frequently...Weekly payWork at office
- ...Job Description Job Description The Mechanical Engineer drives safety improvements, develops preventive and predictive maintenance... ...production delays, implement continuous improvement projects, manage spare parts and SOPs, coordinate contractors, and support project...For contractorsFlexible hours
- ...solutions. Our products are engineered to meet the highest standards... ...company-defined engineering change process. Improve and create new... ...Flow Connections engineering manager. Education and Experience:... ...SolidWorks to create parts, assemblies, and drawings. ~...Worldwide
$60k - $80k
...skilled and experienced Fire Sprinkler Design Engineer to join our dynamic team. The ideal... ...of technical expertise, project management skills, and a commitment to ensuring the... ...decrease turnaround times and streamline work processes; works cooperatively and jointly to provide...Full timeFor contractorsLocal areaMonday to FridayFlexible hoursShift work- ...fabrication and repair of tools, dies, and parts. This role requires a strong understanding of machining processes, tool repair, and the ability to interpret engineering drawings. The Toolmaker will ensure the safety, quality, and efficiency of production while adhering...
$50 per hour
...This position is for a Test Engineer who will lead and coordinate... ...various tests within the Release Assembly (RA) IPT such as structural... ...engineering concepts and processes• Experience utilizing Creo... ...Requirement development and management• Ability to work in a reciprocal...Full timeTemporary workWork experience placementCasual workFlexible hours$50 per hour
...description for this position Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy....Full timeTemporary workWork experience placementCasual workFlexible hours$50 per hour
...description for this position Researches, plans, designs and develops mechanical products and systems such as instruments, controls, robots, engines, machines and mechanical, thermal hydraulic or heat transfer systems for production, transmission, measurement, and use of energy....Full timeTemporary workWork experience placementCasual workFlexible hours$80k - $95k
...candidate will have experience supporting industrial manufacturing equipment including industrial vacuum furnaces, high-temperature process equipment, pumps, hydraulics, cooling systems, and related plant utilities. Responsibilities: Supervise daily maintenance...Permanent employmentFor contractorsVisa sponsorshipWeekend work$42 per hour
...legally protected group status. At Randstad, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a...Permanent employmentTemporary workWork experience placementShift workDay shift- ...feedback/suggestions for improvement on work instructions and/or processes Employees must understand the general requirements of ISO90... ...Quality Policy and have a working knowledge of the Quality Management System in terms of their job function and interaction with process...
$29.41 per hour
...equipment, tanks, nets, and related tooling. Review routing sheets, engineering drawings, and wheels to ensure all information is accurate; verify cutting instructions and wheel condition prior to processing. Operate plating equipment and large wheel/diamond plating...Full time- ...Job Details: HVAC Mechanical Engineer My client is Consulting Engineer and Design Build type firm. They are actively seeking Junior to Senior level HVAC Mechanical Engineers with their EIT or tracking towards their PE. They do Mission Critical work for Utility...
- ...that house them. Our passion, combined with Globus’ world-class engineering, transforms clinical insights into tangible musculoskeletal... ...in order to facilitate production. This position will develop processes for manufacturing in accordance with ISO-13485. Essential Functions...Full timeFlexible hours
- ...Manufacturing Engineer A contract metal fabrication manufacturer is seeking a Manufacturing... ...of experience to improve production processes and support new and existing work.... ...cutting, punching, welding, machining, and assembly. To be considered, please submit your...Contract work
$80k - $90k
...EngineerJob Description The Manufacturing Engineer plays a key role in improving product... ...Analyze existing manufacturing processes and provide recommendations to improve product... ...documentation. Ability to work independently and manage multiple projects or process improvement...Permanent employmentFull timeWork at office
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Assembly Process Engineering Manager. Be the first to apply!




