Electrical Mechanical Technician
$25 - $35 per hourQuad
Building Maintenance Technician – Building Systems
Pay Range: $25.00 – $35.00 / hour
Quad Sussex, WI is seeking a Building Maintenance Technician to support the upkeep and operation of facility building systems and infrastructure . This role focuses on maintaining HVAC, plumbing, utilities, and general building systems to ensure a safe and reliable work environment.
Candidates with general maintenance experience are encouraged to apply— HVAC or electrical experience is a plus, but not required .
Paid relocation may be available for highly qualified candidates located 100+ miles from the plant.
Why Join Quad
- Competitive pay based on experience
- Excellent benefits package
- Strong team culture and supportive work environment
Schedule:
12-hour shifts (3 days one week, 4 days the next)
Rotating days every 4 months
Key Responsibilities
Building Systems & Maintenance
- Perform routine maintenance and repairs on building systems including HVAC, plumbing, and utilities
- Assist with maintaining heating, cooling, and ventilation systems
- Support upkeep of refrigeration equipment such as coolers and air dryers
- Help maintain water systems, including basic treatment and monitoring
General Facility Maintenance
- Complete general building repairs such as:
- Plumbing fixtures (toilets, sinks, drains)
- Minor wall repairs, painting, and ceiling tile replacement
- Roof leak patching and basic structural repairs
- Maintain and repair doors, dock equipment, and other facility components
Equipment & Mechanical Support
- Assist with maintenance of motors, compressors, pumps, and other mechanical equipment
- Perform basic fabrication, repairs, and adjustments as needed
Grounds & Seasonal Work
- Perform basic grounds maintenance and landscaping
- Assist with snow removal and operate equipment as needed
Safety & Teamwork
- Follow all safety policies and procedures
- Keep work areas clean and organized
- Work from maintenance schedules, service requests, and team priorities
- Communicate effectively with team members and supervisors
Required Qualifications
- High School Diploma or GED
- 1–3 years of maintenance, facilities, or related experience
- Willingness to learn and take on a variety of maintenance tasks
- Ability to work independently and as part of a team
- Willingness to work overtime as needed
Required Skills
- Basic mechanical aptitude and troubleshooting ability
- Experience using hand and power tools safely
- Ability to follow instructions and read basic technical information
- Strong work ethic and reliability
- Must provide own basic hand tools
Preferred Qualifications (Nice to Have)
- Experience with HVAC, plumbing, or building systems
- Basic electrical knowledge (motors, controls, or troubleshooting)
- Experience in a manufacturing or industrial environment
- Technical training or certifications in maintenance-related fields
- Valid driver’s license (for snow removal equipment operation)
Physical Requirements
- Ability to lift up to 50 lbs regularly and up to 75 lbs occasionally
- Ability to stand, walk, bend, and reach for extended periods
- Ability to work at heights and in confined spaces
- Ability to work indoors and outdoors in varying conditions
- Ability to work 12-hour shifts
$25 - $35 per hour
...Building Maintenance Technician – Building Systems Pay Range: $25.00 – $35.00 / hour... ...experience are encouraged to apply— HVAC or electrical experience is a plus, but not required... ...facility components Equipment & Mechanical Support Assist with maintenance of...SuggestedFull timeSeasonal workRelocation packageShift work3 days per week- ...Technician AAt Lakeside Foods and our family of companies, we're committed to providing... ...installing, maintaining, and repairing electrical systems and industrial machinery, using... ...issues, and collaborate with operators and mechanics to ensure efficient production....SuggestedTemporary workApprenticeshipInternshipImmediate startFlexible hours
$35.5 per hour
...Job Description Job Description Description: Now Hiring: Controls, Automation & Electrical Technician | 1st Shift Schedule: 6:00AM – 6:00PM | Alternative Work Schedule Pay: $35.50 (+ based on experience) Why join our team?? Need cash before payday?...SuggestedFull timeSeasonal workImmediate startDay shift- ...Mechanical Technician We are looking for a hardworking, mechanically inclined individual to join our maintenance and operations team as a Mechanical Technician. This hands-on role supports equipment maintenance, facility upkeep, production operations, and general site...SuggestedLocal area
$26 - $32 per hour
Summary: Join a growing manufacturer in Jackson, WI as a Tool and Die Maker and put your completed Tool and Die apprenticeship and precision machining skills to work. Bring your experience building, repairing, and modifying complex tooling in a first shift role. Qualified...SuggestedHourly payApprenticeshipMonday to FridayDay shift- ...Mechanical Assembler I Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering... ..., or schedule form. Preferred Qualifications: Some electrical assembly is preferred High school diploma or general education...Monday to FridayDay shift
- ...responsible for installing, maintaining, and troubleshooting electrical systems ranging from low-voltage controls up to 600 volts that... ...meters. Knowledge of Pneumatics and Hydraulics Knowledge of mechanical & equipment processes Completes Industrial Lift...ApprenticeshipLocal areaFlexible hoursDay shift
$32 - $42 per hour
Industrial Maintenance Mechanic - Relocation Assistance Available Location: Hartford, WI Pay: $32.00 - $42.00 / hour, based on relevant experience and work history Paid Relocation: Available for qualified candidates relocating from 100+ miles away. Shift Options...Full timeLocal areaRelocationRelocation packageShift workNight shiftWeekend work$30 - $36 per hour
...we can always create a better way. Industrial Maintenance Mechanic Location: Quad – Chemical Research & Technology (CR/T), Hartford... ...and technical drawings. Basic knowledge of industrial electrical systems and safe work practices. Ability to work at heights...Full timeLocal areaMonday to FridayShift workDay shift$32 - $42 per hour
...for ourselves and our clients. At our core, we're a company that believes we can always create a better way. Industrial Maintenance Mechanic $32.00 / –$42.00 /hour | Shift Positions Available Relocation Assistance Available for Qualified Candidates (100+ miles away) Are...Full timeTemporary workLocal areaRelocation packageShift workNight shift$34.5 - $39.5 per hour
...time Description Electromechanical Technician | 2nd Shift Germantown, WI... ...maintenance and process improvement of mechanical equipment, automated PLC's, robotics and... ...maintenance and troubleshooting for all electrical, mechanical and pneumatic systems to support...Full timeSeasonal workImmediate startMonday to FridayShift workAfternoon shift- ...PLCs in a fast-paced manufacturing facility to determine mechanical or electrical failure Responsible for complex troubleshooting of industrial... ...Electrician, Industrial Electrician, Electrical Technician or equivalent trade is preferred In lieu of a journey-level...Hourly payFull timeWork at officeRelocationRelocation package
$45 - $70 per hour
...location in Jackson, WI — clean slate, new leadership, and a technician‑first culture. If you’re looking for a stable, well‑run residential... ..., surge protectors, etc.) Troubleshoot and repair electrical issues in homes (panels, circuits, devices, wiring) Identify...Full timeImmediate start- ...Responsibilities: As an Electrician, you will: ? Maintain Electrical Systems Install, inspect, troubleshoot, repair, and... ..., control systems, commercial kitchen equipment, and other mechanical systems throughout Cedar Community. ????? Troubleshoot &...Full timeLocal areaShift workRotating shiftDay shift
$20 per hour
...rewarding career with us. Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a Field Technician at Spectrum, you will be on the front lines, installing and repairing services and educating customers on their use. In this...ApprenticeshipWork experience placementLocal areaImmediate startVisa sponsorship- ...Electrical Maintenance Technician- Night Shift Our client is hiring Electrical Maintenance Technicians on NIGHT SHIFT! Do you want to work at... ...loops and combustion controls. Basic understanding of mechanical devices. Strong communication skills and familiarity...Full timeWork experience placementNight shift
- ...duty, high-performance solutions. As a Senior Additive Technician , you will play a critical role in supporting Milwaukee Tool... .... ~ Ability to troubleshoot and perform maintenance on mechanical, electrical, and process-related equipment. ~ Familiarity with CAD software...
- ...of the Manufacturing Manager, the Manufacturing Technician programs CNC equipment and develops process... ...the employee is occasionally exposed to moving mechanical parts, outside weather conditions, and risk of electrical shock. The employee occasionally performs work-...For subcontractor
- Tool & Die Maker 1st Shift (4-Day Workweek)ATACO Steel Products Corp is hiring an experienced Tool & Die Maker to support our metal stamping operations. This role focuses on building, repairing, and maintaining stamping dies, fixtures, and tooling to keep production running...Temporary workLocal areaDay shift
- Job Description Job Description Great pay and Benefits at no cost to you!! Candidates needed with basic experience in machine moving, welding, conveyor work, shaft alignment, and rigging experience. A Class A CDL with no restrictions is not required but would be a ...Work experience placement
- ...pass the testing in place with Ramsay Corporation. Demonstrated troubleshooting skills in solving problems with tool and die and mechanical maintenance on automated equipment. Thorough understanding of tool room equipment, operations associated with drilling, milling,...Hourly payFull timeApprenticeshipImmediate start
- Description Kapco Metal Stamping is the Midwest's premier contract manufacturer of metal components, trusted by some of the world's biggest brands to make precision metal parts. Kapco's constant investment in modern, state-of-the-art equipment and cutting-edge technology...Contract workWork experience placementRelocation packageWeekend workDay shiftAfternoon shift
- ...Manufacturing Technician Work for an industry leading casting manufacturer with a highly-competitive compensation and benefits package. Position - Manufacturing Techinician Job Location - Hartford, WI Starting Date - Immediate Need...Full timeTemporary workLocal areaImmediate startShift workNight shift
- ...machinists, mold maintenance, and production technician personnel as needed.Essential Duties... ...with plastic injection moldings, mechanical maintenance systems and related equipment... ...toxic or caustic chemicals and risk of electrical shock. The noise levels in the work environment...ApprenticeshipImmediate start
- ...constructed tools, dies, fixtures, gauges, machine attachments and mechanisms. Job Description: Layout work and plan machining and... .... Demonstrated experience making visual, dimensional, electrical, or mechanical tests of materials, processes, assemblies, or...
$28 - $38 per hour
Tool & Die Maker Full-Time Menomonee Falls, WI, US Pay Range: $28 - $38 per hour Reich Tool & Design, a Menomonee Falls based, family-owned and operated Tool and Die manufacturer for 60 years is looking for an experienced Tool & Die Maker. The qualified candidate...Hourly payFull timeMonday to FridayFlexible hoursDay shift$44.61 per hour
...metal work. Proficient in welding, Mig, Tig and Stick, Brazing, Soldering etc. Install, assemble, fabricate, maintain, and repair mechanical process piping systems. Maintain air handling equipment i.e. vacuum systems and ventilation systems. Utilizing Microsoft Office...Full timePart timeWork at officeLocal areaImmediate startRelocationRelocation packageShift work- Corporate Overview Server Products is a highly regarded food and beverage technology company that manufactures products for the restaurant and food service markets. Server Products is committed to designing smarter solutions to everyday challenges so customers can...
- Summary As a member of the Tool and Die Department the Tool and Die Maker is responsible for building, repairing, and maintaining precision tools, dies, jigs, and fixtures of various application. This role requires expertise in machining and precision measurement ...
- DIRECT HIRE PLACEMENTS for Experienced Tool & Die Makers 1ST SHIFT AVAILABLE IN BUTLER, GRAFTON, CEDARBURG, OR MEQUON Leading sheet metal manufacturers hiring experienced Tool & Die Makers to help support production by building new stamping dies, weld, and gage fixtures...ApprenticeshipLocal areaImmediate startDay shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electrical Mechanical Technician. Be the first to apply!
- electrical Jackson, WI
- electrical qualifier Jackson, WI
- technician electrical Jackson, WI
- electrical controls Jackson, WI
- mechanical installation Jackson, WI
- electrical engineer technician
- electrical equipment technician
- entry level electrical engineering technician
- electrical systems technician
- electrical production technician



