Precision CNC Setup Machinist (Turning and VMC)

What a Day Looks Like You begin by opening the program, reading through the code, and spotting any errors before a single chip flies. You choose the right workholding, secure the workpiece in the CNC, load and secure cutting tools, and dial in offsets on turning machine centers. As the cutting operation runs, you observe the process and compare the first-off and subsequent pieces to the blueprint, checking specific metric dimensions according to the product’s pre-determined inspection cycle. If anything is out of tolerance, you alert the lead immediately and pause production. You document quality and production results accurately, then reset tooling and adjust tool or program offsets as needed to complete the job order. Throughout the run, you preset tools, monitor tool wear and breakage, and use the tool-life monitoring system to stay ahead of issues. You deburr thoroughly—understanding all aspects of the deburring process—and operate the CMM using existing inspection programs. You keep the machine in top condition with basic maintenance and follow all safety procedures for proper operation. If anything unusual occurs with the machine, tooling, or workpiece, you inform the lead without delay. And when needed, you step in to perform Machine Operator functions and other duties as assigned. Core Responsibilities Read CNC programs, identify errors, and set up machines for both turning and milling (VMC) work. Select appropriate workholding and secure workpieces in the CNC. Load and secure cutting tools; preset tools and apply tool/program offsets. Run machines, observe cutting operations, and verify results against blueprints with metric measurements per the defined inspection cycle. Alert lead of any non-compliant parts before continuing production. Accurately complete quality and production control documentation. Repeat machine operations to fulfill job orders efficiently and accurately. Notify lead of unusual occurrences with the machine, tooling, or workpiece. Perform basic machine maintenance and follow all safety procedures. Set up and operate a CMM using existing programs. Deburr parts and apply best practices in all aspects of deburring. Capably perform Machine Operator duties; perform other tasks as required. Qualifications High school diploma or GED. Three to five years of related experience and/or training, or an equivalent combination of education and experience. Must be able to set up and operate CNC machining centers. Proficiencies CNC Programming CNC Machine Repair CNC Machine Installation Machines & Technologies You’ll Use CNC Mill (3–4 axis VMC) CNC Lathe (2–4 axis) Blueprint Reading #J-18808-Ljbffr HOERBIGER