Raw Materials Specialist
T1 Energy Inc.
T1 Energy is bringing solar manufacturing back to the U.S. by building a domestic solar supply chain. Our mission is to invigorate America with scalable, reliable, and low-cost energy. Our fully operational 5GW solar module facility in Wilmer, Texas, can manufacture more than 20,000 modules every 24 hours. By the time you finish reading this paragraph, we will have produced two solar panels that will power American homes and fuel domestic AI. We're focused on building advanced American manufacturing and we're passionate about engineering a better future filled with abundant energy. The Raw Materials Specialist is responsible for maintaining accurate inventory and material flow for all inbound raw materials. This role ensures proper receiving, documentation, storage, and reconciliation of raw materials while supporting production needs and maintaining compliance with internal standards. The specialist works closely with warehouse, quality, and production teams to protect data integrity, prevent material shortages, and uphold operational discipline across the raw materials area. Key Responsibilities Ensure all inbound raw material receipts are accurately recorded, labeled, and stored according to established procedures. Conduct routine inventory checks and cycle counts to maintain alignment between physical inventory and system records. Collaborate with the Compliance Specialist to validate raw material inventories at exterior warehouses. Coordinate with production, quality, and logistics teams to resolve discrepancies and maintain accurate material availability. Manage raw material staging for production, including timely issuance, documentation, and return of unused materials. Support month end and quarter end inventory counts with accurate reporting and reconciliation. Maintain documentation and audit trails for all raw material adjustments, investigations, and material movements. Assist in identifying and correcting root causes of inventory variances and support continuous improvement initiatives. Communicate with third party logistics partners when raw material validation, testing, or reconciliation is required. Uphold housekeeping, safety, and compliance standards within the raw materials area. Perform other duties as assigned by the Raw Materials Supervisor or Warehouse Operations Manager. Qualifications High school diploma or equivalent required. Associate or bachelor’s degree in supply chain, logistics, or related field preferred. Two or more years of experience in warehouse operations, raw materials handling, or inventory control. Strong understanding of material flow, warehouse systems, and compliance requirements. Proficiency in Microsoft Office Suite and warehouse management systems. Experience with Oracle, MES, or TMS platforms is preferred. Strong communication, organizational, and problem‑solving skills with attention to detail. Ability to work independently and collaboratively in a fast‑paced environment. Physical Requirements Ability to lift up to 50 lbs and stand or walk for extended periods. Comfortable working in warehouse environments with varying temperatures. The T1 Way We move fast, expect accountability, and treat people with respect. We also have a no‑jerks policy: we don't tolerate big egos, bad behavior or "that's not my job" attitude. Be sharp, be honest, be human. If you can hold the line and have a sense of humor, you'll fit right in. T1 Energy is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants and do not discriminate on the basis of any legally protected characteristics. #J-18808-Ljbffr T1 Energy Inc.
- ...building advanced American manufacturing and we're passionate about engineering a better future filled with abundant energy. The Raw Materials Specialist is responsible for maintaining accurate inventory and material flow for all inbound raw materials. This role ensures...SuggestedWork at office
$19 - $27 per hour
...SRCTec, LLC is currently seeking a Material Handling Specialist to safely load/unload materials, operate equipment, ensure inventory accuracy, and follow safety standards across multiple facilities. What You’ll Do Safely load and unload materials from vehicles, transporting...SuggestedTemporary workImmediate start$20.63 - $23 per hour
...Material Handler Lead CEVA Logistics provides global supply chain solutions to connect people, products, and providers all around the world. Present in 170+ countries and with more than 110,000 employees spread over 1,500 sites, we are proud to be a Top 5 global 3PL...SuggestedContract workTemporary workFlexible hours- RJW Logistics Group - - Responsibilities: Load and unload trucks and trailers safely and efficiently using proper procedures; Operate forklifts and pallet jacks to move, stack, and stage goods; Pick, pack, and prepare shipments from warehouse inventory; Maintain orderly...Suggested
$20 - $78 per hour
...Material Handler II - 2nd Shift Join the largest manufacturer of tile and natural stone in the United States and watch your career stand out with Dal-Tile, a subsidiary of Mohawk Industries. Our close-knit team of dedicated professionals has made us the success we...SuggestedWork at officeMonday to FridayShift workAfternoon shift- ...facility while ensuring personal workspace is always kept orderly. Read shipment summaries, purchase orders, packing lists, bill of materials, and other documents related to the position within the DC. Perform all duties as it relates to picking and preparing sales...Local areaFlexible hours
- ...Material Handler Airbus Helicopters is looking for a Material Handler to join our team based in Grand Prairie, TX. Your duties will consist of performing a variety of tasks in support of warehouse operations including receiving, stocking, picking and shipping of...Work at officeRemote workFlexible hours
- ...Material Handler- 2nd Shift Title: Material Handler- 2nd Shift City, State: Irving, TX, Texas Reports to: Production Supervisor Department: Irving - 2nd Shift DSI13 Line 2 Classification: Nonexempt Position: Material Handler Compensation: Hourly Non-...Hourly payFull timeTemporary workLocal areaWork visaAfternoon shift
- ...Successful candidates will possess the following qualifications: 2-3 years' experience as a Material Handler. Forklift experience is required Experience in safely loading/unloading materials onto trailers and trucks. Requires frequent heavy lifting up to 75...
$17 - $21 per hour
...Material Handler Operator II CEVA Logistics provides global supply chain solutions to connect people, products, and providers all around the world. Present in 170+ countries and with more than 110,000 employees spread over 1,500 sites, we are proud to be a Top 5 global...Contract work- ...Methodist Health System in Dallas, TX seeks a Materials Resource Specialist to receive ships/mails, restock, fulfill requisitions, and support hospital inventory needs. The role interfaces with Corporate Materiel Management and Logistics, maintaining a clean, safe environment...
$59.5k - $99.17k
...safety training and the ability to understand and follow the directions identified in Job Safety Analysis (JSA), PPE Assessments, Material Safety Data Sheets (MSDS) and all Safety Procedures and Alerts. Essential Knowledge and Skills: Understanding of manufacturing...Permanent employmentFull timeFlexible hoursShift work- ...Sustainable Solutions, LLC in Mesquite, TX is seeking a Resin Handling Specialist to manage receipt, transfer, blending, and distribution of... ...safety and environmental compliance. You will load materials, verify grades, monitor inventories, and perform routine quality...
- ...start before summer begins. Responsibilities Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel) Communicate with project manager, engineering technicians, client representative...Full timeFor contractorsSummer work
- Jabil is seeking a Senior Industrial Engineer to work in our Richardson, TX site. How will you make an impact? As a Senior Industrial Engineer with Jabil, you will plan, design, implement, and manage production and service systems to ensure performance, reliability, quality...
- ...A leading staffing agency is looking for multiple Materials Technicians to join a growing team in Dallas, TX. The role involves performing testing and inspection of construction materials and requires at least 1 year of relevant experience. Ideal candidates should possess...Full time
- FW Walton, based in Dallas, TX, is seeking a Construction Safety Technician to uphold safety standards on job sites. This role involves conducting inspections, supporting safety initiatives, and training staff to ensure compliance with OSHA regulations. The ideal candidate...
- 5 Structural Technologies, LLC is seeking a construction field technician to join their team. The role involves concrete and post-tension repair work, including significant travel to various job sites throughout South Florida. The ideal candidate will have experience in...
- ...staff concerning product design and tooling to ensure proficient production methods Confers with vendors to resolve equipment, materials and/or quality issues that are impacting the quality of the end product being produced Applies statistical methods to analysis...Work experience placementLocal areaFlexible hours
$70.57k - $100k
Requisition Number: 28791 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $70,573.00 - $100,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid This opportunity...Full timeWork experience placementLocal areaWorldwide- ...safe work practices and hazardous conditions remediation. • Analyze production processes for improvement of labor efficiency and material cost. • Develop training materials for assembly personnel. • Provide technical assistance to the quality department to support...
$75k - $85k
Industrial Process Engineer - Direct Hire Wylie, TX $75-85k+/year DOE New paint-related process coming Position Summary The Industrial Process Engineer is responsible for designing, developing, and optimizing manufacturing processes to improve efficiency, quality, safety...- ...product assurance technicians, and inspection personnel to aid in their job functions. • Support the evaluation of non-conforming material, in-house and from outside sources, and arrange for appropriate disposition and corrections. Requirements QUALIFICATIONS:...Full timeContract work
- Atkore in Dallas, TX, seeks a Production Shift Supervisor for PVC Injection Molded products. You will lead a lean-driven team, supervise molding operations, and drive improvements in safety, quality, and efficiency. This role reports to the Production Manager and requires...Shift work
- ...manufacturing processes, improving efficiency, and driving lean initiatives. In this role, you'll utilize your expertise in product design, materials, tooling, and process development to support innovative solutions in the production of industrial HVAC equipment. Join a company...Work at office
- ...activities within the defense industry Familiarity with R&D manufacturing in the aerospace and defense industry Experience with raw materials and polymer processing Demonstrated experience in program quality roles Experience supporting internal, customer, and third‑party...Permanent employmentWork at officeFlexible hoursShift work
- ..., 3PL, or high-volume manual assembly environments (kitting, bundling, packaging) ~ Highly analytical with the ability to translate raw data into actionable strategies ~ Strong root cause analysis skills and a track record of resolving bottlenecks through structural...Full time
- PDS Health in Irving, TX, seeks a Developer, Process Automation with strong Automation Anywhere experience to modernize operations by integrating software automations across applications and systems. Focus is on technical automation, requiring programming, scripting, and...
- CTC is seeking an experienced JFrog Administrator to join our Code Management team in Dallas. The role focuses on executing strategic projects, optimizing CI/CD workflows, and maturing our automation ecosystem with GitLab, Ansible, and Terraform Enterprise as we move away...
$76.2k - $127k
TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency (\"RF\") components...Permanent employmentWork at officeFlexible hoursShift work
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Raw Materials Specialist. Be the first to apply!
- material control Dallas, TX
- raw materials Dallas, TX
- materials testing Dallas, TX
- material coordinator Dallas, TX
- materials manager Dallas, TX
- material program manager Dallas, TX
- building materials Dallas, TX
- building materials sales Dallas, TX
- materials assistant Dallas, TX
- construction materials manager Dallas, TX

