Electrical Controls Designer
Philly Shipyard Inc
ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
- Ensure all Hanwha Philly Shipyard’s safety procedures, rules and regulations are performed and met
- Perform basic and detail design activities for assigned systems, including calculations, diagrams, drawings, design change notices, and equipment selection relevant to assigned systems
- Assigned Systems, including but not limited to Alarm and Monitoring, Fire Detection and Alarms, and Alarm Signaling Systems
- Participate in basic and detail design activities within the Electrical Design Department, including review of design documents from other shipyard engineers, vendors, and external design partners
- Coordinate and assist the fabrication, assembly, installation, and/or testing of assigned systems, and equipment
- Prepare technical specifications, collect vendor information and maintain maker’s list for assigned systems
- Generate and access Bills of Material and provide technical support for material tracking, logistics, handling, and timing of installation
- Propose technical improvements; develop and implement quality standards applicable to assigned systems
- Interface with Owner and Class to resolve technical issues
- Develop testing procedures for assigned systems
- Provide field engineering support as required to support production activities during Class and owner inspections or responding to production questions arising during vessel construction
- Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to assigned systems
- Perform other related duties as required and assigned
- Able to communicate effectively with all levels of the organization, both verbal and written
- Decision making/problem solving
- Organizational understanding
- Willingness and ability to work as a team member
- Conflict resolution
- Strategic thinking
- Stress management
- Teamwork
- Bachelor's Degree in Automation and Electronic Systems is preferred; however, candidates with a technical diploma and 10+ years’ experience in ship design and/or construction may also be considered
- Minimum 10 years’ experience in shipbuilding, Automation and Electronic Systems Specialization, or manufacturing
- Experience with Automation System or Control system design and construction
- Proficiency with MS Office and CAD systems such as AutoCAD
- Knowledge/experience concerning basic and detail ship design
- Knowledge/experience concerning modern shipbuilding practices
- Experience with Classification Society Rules for New Construction, IMO Regulations, and US Coast Guard Requirements as well as international experience or familiarity with European and/or Asian Shipbuilding Standards
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, stooping, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the physical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.
Vacancy posted 23 hours ago
Similar jobs that could be interesting for youBased on the Electrical Controls Designer in Clayton, NJ vacancy
$105.57k - $134.6k
...Description: Engineer I, Controls Medical Manufacturing Technologies (MMT) |... ...cant. Specializing in automation, machine design, material handling, and custom tooling,... ...Responsibilities Design & Development: Create electrical and electromechanical systems, including...SuggestedFull time$120k - $130k
...Description Job Description Job Title: Electrical Engineer Location: On-Site – Monroe... ...the Technology & Innovation team to design and implement innovative electrical solutions... ..., including wiring, connectors, and control systems, tailored to marine environments...SuggestedWork at officeLocal areaRemote work- ...Electrical Design Engineer Position Summary: The Electrical Engineer will provide electrical engineering support to the Land Based... ...structure/inter-relationships Have familiarity with electrical control systems Familiarity with Navy Shipboard Electric Plant...SuggestedContract workFor contractorsWork at officeImmediate startFlexible hours
$17 - $24 per hour
...promise of a safe place to live, work, and play behind pest controls best-known brand . Be part of a purpose-driven team with... ...highest level of protection and service to their customers on a designated service route. Their career starts with in-depth, award-...SuggestedHourly pay- ABOUT THIS JOB ***THIS POSITION REQUIRES AN ENLISTMENT IN THE U.S. ARMY OR ARMY RESERVE*** As a Horizontal Construction Engineer, you'll operate heavy construction equipment like bulldozers, tractors, backhoes, cranes, excavators, and road graders to help pave...SuggestedFull timePart timeImmediate startRelocation package
- ...Duties Help You will determine placement of electrical distribution panels and other equipment.... ..., systems, generators, switchboards, or control equipment in a shipyard environment. You... ...access to a range of benefits that are designed to make your federal career very...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$101.7k - $167.68k
...instrumented systems (SIS), programmable logic controllers (PLC), and field relay logic. The... ...Engineer will have Process, Controls, Electrical, Mechanical acumen to lead and... ...Maintenance disciplines to improve or correct designs, installations, and increase plant equipment...Full timeWork experience placement- ...Job description: Duties and Responsibilities: Manage electrical projects using estimate, plans, and project management methods.... ...field. ~ Prior on-site field work experience preferred. We are a Design/Build company and attention to electrical installations and code...Full timeFor contractorsWork experience placementFor subcontractorWork at officeLocal areaRemote workMonday to FridayFlexible hours
- ...contracting services. PULLMAN's capabilities include specialty design-build services for new and existing structures, as well as a wide... ...rate tracking Estimating Budget preparation and project cost control Safety management Quality control Business development and...Temporary workFor contractorsWork experience placementInternshipWork at officeLocal area
$44.62 per hour
...general supervision of the shift supervisor, performing all electrical maintenance on equipment to maximize productivity while maintaining... ..., including, but not limited to, motors, regulators, controllers, generators, switches, etc. Inspect electrical equipment and...Hourly payTemporary workCurrently hiringLocal areaImmediate startFlexible hoursShift workNight shiftDay shift- ...Mechanical offers you the opportunity to run your own projects, control the daily decisions that accompany any job and unlimited growth... .... In addition to our Emergency Services, we also provide Design and Build Services, Construction Management, and Preventative/...For contractors
$105.59k - $180.17k
...trade on moderate size and complex projects to determine that Contractor's construction activities are monitored and controlled in accordance with design plans, specifications, and contractual requirements. Responsible for assisting with the resolution of project issues...Full timeContract workFor contractorsWork at office- ...Job Description Job Description NDI Engineering Company is seeking an Electrical Engineer to join our team supporting the design of US Navy test facilities, as well as other design projects. Position to be performed on-site at our Thorofare, NJ, office. The ideal...For contractorsFor subcontractorWork at office
- The Electrical Technician / Industrial Electrician is a hands‑on role responsible for keeping our production and facility electrical systems... ..., troubleshoot, repair, and maintain electrical equipment, controls, and instrumentation across production and facility systems...
- ...submarines, and aircraft carriers. Support design, modeling, analysis, and testing of all... ...new technologies and advanced control systems. Conduct Engineering surveys... ...Bachelor's degree in any mechanical or electrical engineering discipline from an accredited...Hourly payFor contractorsFor subcontractorNight shift
$140k - $160k
...projects related to US Navy Hull, Mechanical, & Electrical (HM&E) systems. Applicants should possess leadership skills in engineering design and implementation in environmental... ...Compactors P2A Equipment Afloat HAZMAT Control and Stowage Equipment Ability to work...Temporary workWork at officeRemote work- ...5-7+ years’ experience in Commercial HVAC Service a must. ~ Controls knowledge not required but is a plus! ~ EPA Type I + Type II... ...the premier provider of heating, air conditioning, plumbing, electrical, and remodeling services to home owners and businesses in the...Temporary workApprenticeshipWork at officeRelocation package
- ...and commissioning of new equipment Diagnose, troubleshoot, and repair HVAC systems Replace components including compressors, control boards, and other key system parts Perform maintenance on existing HVAC systems Ensure work meets safety codes and standards...Hourly payFull time
$23 - $34 per hour
...Description: To install customer required electrical packages. Be able to work alone from electrical drawings. Calculate total load... ...relays in ignition, lighting, air-conditioning, and safety control systems, using electrician's tools. Refer to schematics and...Hourly payFull timeFlexible hours- ...overhaul, installation, modification, calibration, and test of electrical systems and equipment on naval surface ships and submarines,... ...completion of tasks that are considered essential to the mission designated by a local or command decision. Qualifications Although a...Permanent employmentFull timeTemporary workPart timeInterim roleWork at officeLocal areaImmediate startRemote workRelocationRelocation packageShift workNight shift
$20 per hour
Urgent Hiring: Helpers for In-Home Support - Williamstown, NJ Williamstown, NJ 08094 Location: Williamstown, NJ 08094 Start Date: ASAP Helper Rate: $20 per hour We are seeking a compassionate and experienced helper to support a female client recovering from a recent...Hourly payImmediate startFlexible hours$128.5k - $185k
...Responsible for the design, development and implementation of standards, methods and procedures... ...to assembly, process, mechanical, electrical, electro-mechanical systems, field and... ...Responsibilities Develop and implement quality control processes, procedures, and policies to...For subcontractorLocal areaFlexible hours- ...Job Summary We’re looking for a hardworking Instrument and Control Maintenance Technician to join our team! Responsibilities include... ...Frequency Drive (VFD) configuration ~ General Experience in Electric Instrumentation such as Coriolis meters, Mag flow meters, RTD...Night shiftWeekend work
- ...Service Technician who possesses mechanical abilities with electrical controls experience. The ideal candidate is efficient, team‑oriented,... ...record. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities,...Full time
- ...Senior Mechanical Engineer to support our team in Thorofare, NJ. The ideal candidate will have experience in designing Naval Ship Hull, Mechanical and Electrical (HM&E) systems with extensive experience in delivering complex design projects from concept to operational...For contractorsFor subcontractorWork at office
- ...Required Skills Minimum of 5 years mechanical/electrical experience. Troubleshooting of electrical and pneumatic controls. Experience working with 3‑phase electric,... ...Duties Please note this job description is not designed to cover or contain a comprehensive listing of...Full time
- ...Engineering Company is seeking a Structural Engineer to support the design of US Navy test facilities.The ideal candidate will have... ...naval architecture, marine, civil, structural, mechanical, and electrical engineering and design services. NDI has an ISO 9001:20015 Certified...For contractorsFor subcontractorWork at office
- ...package units, coils, humidifiers, water heaters, circulators, zone controls, heat pumps, air handlers, etc Assist in the preparation and... ...of heating, AC, and IAQ equipment and HVAC system designs Enthusiasm to learn and grow The ability to treat your time...Relocation package
- Job Description Job Description Job description Duties • Perform installations, maintenance and repairs to commercial HVAC equipment • Order parts and supplies as needed • Keep current on all manufacturers concerning repairs/install • Complete paperwork...Full timeWork experience placementRelocation
$40.26 per hour
...diagnosing, repairing, replacing, and installing plant mechanical, electrical, hydraulic, and pneumatic systems for all plant equipment.... ..., repair and install mechanical components, electrical controls, AC/DC motors, pneumatic equipment, hydraulic equipment, bearings...Hourly payFull timeTemporary workMonday to FridayFlexible hoursShift workWeekend workAfternoon shift
Do you want to receive more vacancies?
Subscribe and receive similar vacancies to Electrical Controls Designer. Be the first to apply!



